From Fedora Project Wiki
 
(6 intermediate revisions by 3 users not shown)
Line 1: Line 1:
= Packages for Embedded Development =
= Packages for Embedded Development =


Fedora includes support for developing embedded application targeted at the Microchip PIC, the predominant embedded controller, as well as the Atmel AVR.  There is also limited support for other, less popular parts.
Fedora is used for all Embedded Development activities/workflows (cross-tools, alternate libc, RT, romfs, root flash, small footprint targets, etc.) that target the full spectrum of system platform-OS-application combinations:
* Can target systems able to run Linux (including rpm-managed systems),
* Can target systems that run other kernels, microkernels, RT kernels, hypervisors, or
* Can target systems that run only non-kernel core code.
 
Embedded targets that run (at least some portion of) Fedora include x86, x86_64, Blackfin, [[Architectures/ARM/Using | ARM]] and others.
 
Fedora includes support for developing non-Linux embedded applications targeted at the Microchip PIC, a common embedded microcontroller, and the Atmel AVR.  There is also limited support for other parts.


== Microchip PIC ==
== Microchip PIC ==


Fedora includes '''gputils''', a complete suite of assembly language tools for Microchip's 12, 14 and 16 bit cores (PIC10, PIC12, PIC16 and PIC18).  In addition, the '''gpsim''' package provides for simulation on these PICs.  '''piklab''' provides an IDE supporting this toolchain, as well as supporting most of the popular proprietary PIC toolchains, including the C30 toolchain for the 16-bit dsPIC30 and 33 and PIC24H and 24F series.  '''piklab''' also provides support for a wide range of programmers and debugging support for Microchip's ICD2 in-circuit debugger.  '''pikdev''' provides a similar capability and is preferred by some.  '''ktechlab''' provides an IDE for MicroBASIC, as well as the ability to simulate not only the PIC but also the circuit.  '''pikloops''' relieves the drudgery of calculating delay loops.
Fedora includes '''gputils''', a complete suite of assembly language tools for Microchip's 12, 14 and 16 bit cores (PIC10, PIC12, PIC16 and PIC18).  In addition, the '''gpsim''' package provides for simulation on these PICs.  '''piklab''' provides an IDE supporting this toolchain, as well as supporting most of the popular proprietary PIC toolchains, including the C30 toolchain for the 16-bit dsPIC30 and 33 and PIC24H and 24F series.  '''piklab''' also provides support for a wide range of programmers and debugging support for Microchip's ICD2 in-circuit debugger.  '''pikdev''' provides a similar capability and is preferred by some.  '''ktechlab''' provides an IDE for MicroBASIC, as well as the ability to simulate not only the PIC but also the circuit.  '''pikloops''' relieves the drudgery of calculating delay loops.
=== Resources ===
* gputils - http://gputils.sourceforge.net/
* gpsim - http://www.dattalo.com/gnupic/gpsim.html
* piklab - http://piklab.sourceforge.net/
* pikdev - http://pikdev.free.fr/
* ktechlab - http://sourceforge.net/projects/ktechlab/
* pikloops - http://pikloops.sourceforge.net/
* sdcc - http://sdcc.sourceforge.net/


== Atmel AVR ==
== Atmel AVR ==


Many developers prefer Atmel's AVR series because those parts enjoy the support of the complete suite of gcc based tools, including '''avr-gcc''', '''avr-gcc-c++''', '''avr-libc''', '''avr-binutils''', and '''avr-gdb'''.  In addition, the '''avarice''' package provides an interface to Atmel's in-circuit emulator and the parts may be programmed using '''dfu-programmer''', '''uisp''' or '''avrdude'''.
Many developers prefer Atmel's AVR series because those parts enjoy the support of the complete suite of gcc based tools, including '''avr-gcc''', '''avr-gcc-c++''', '''avr-libc''', '''avr-binutils''', and '''avr-gdb'''.  In addition, the '''avarice''' package provides an interface to Atmel's in-circuit emulator and the parts may be programmed using '''dfu-programmer''', '''uisp''' or '''avrdude'''.
=== Resources ===
* avr-gcc, avr-gcc-c++ - http://gcc.gnu.org/
* avr-binutils - http://www.gnu.org/software/binutils/
* avr-gdb - http://sources.redhat.com/gdb/
* avr-libc - http://www.nongnu.org/avr-libc/
* avarice - http://sourceforge.net/projects/avarice
* avrdude - http://www.nongnu.org/avrdude/
* dfu-programmer - http://dfu-programmer.sourceforge.net/
* uisp - http://www.nongnu.org/uisp/


== Intel 8051 ==
== Intel 8051 ==


The venerable 8051 is supported by '''dfu-programmer''' and '''uisp''' for programming, as well as the Small Device C Compiler ('''sdcc''').
The venerable 8051 is supported by '''dfu-programmer''' and '''uisp''' for programming, as well as the Small Device C Compiler ('''sdcc''').
=== Resources ===
* dfu-programmer - http://dfu-programmer.sourceforge.net/
* uisp - http://www.nongnu.org/uisp/
* sdcc - http://sdcc.sourceforge.net/


== Zilog Z80 ==
== Zilog Z80 ==


Fedora includes '''sjasm''', a Z80 assembler, as well as the '''z88dk''' cross compiler.  '''simcoupe''' is a simulator for the SAM Coupe, a Z80 based home computer from the 80's.
Fedora includes '''sjasm''', a Z80 assembler, as well as the '''z88dk''' cross compiler.  '''simcoupe''' is a simulator for the SAM Coupe, a Z80 based home computer from the 80's.
=== Resources ===
* sjasm - http://www.xl2s.tk/
* z88dk - http://www.z88dk.org/forum/
* simcoupe - http://www.simcoupe.org/


== Small Device C Compiler ==
== Small Device C Compiler ==
Line 24: Line 81:


Detailed information about sdcc can be found at http://sdcc.sourceforge.net.
Detailed information about sdcc can be found at http://sdcc.sourceforge.net.
== Macro Assembler AS ==
AS is a portable macro cross assembler for a variety of microprocessors and -controllers. Though it is mainly targeted at embedded processors and single-board computers, you also find CPU families in the target list that are used in workstations and PCs.
AS is provided by the '''asl''' package.
Detailed info about AS can be found at http://john.ccac.rwth-aachen.de:8000/as/

Latest revision as of 21:38, 13 December 2010

Packages for Embedded Development

Fedora is used for all Embedded Development activities/workflows (cross-tools, alternate libc, RT, romfs, root flash, small footprint targets, etc.) that target the full spectrum of system platform-OS-application combinations:

  • Can target systems able to run Linux (including rpm-managed systems),
  • Can target systems that run other kernels, microkernels, RT kernels, hypervisors, or
  • Can target systems that run only non-kernel core code.

Embedded targets that run (at least some portion of) Fedora include x86, x86_64, Blackfin, ARM and others.

Fedora includes support for developing non-Linux embedded applications targeted at the Microchip PIC, a common embedded microcontroller, and the Atmel AVR. There is also limited support for other parts.

Microchip PIC

Fedora includes gputils, a complete suite of assembly language tools for Microchip's 12, 14 and 16 bit cores (PIC10, PIC12, PIC16 and PIC18). In addition, the gpsim package provides for simulation on these PICs. piklab provides an IDE supporting this toolchain, as well as supporting most of the popular proprietary PIC toolchains, including the C30 toolchain for the 16-bit dsPIC30 and 33 and PIC24H and 24F series. piklab also provides support for a wide range of programmers and debugging support for Microchip's ICD2 in-circuit debugger. pikdev provides a similar capability and is preferred by some. ktechlab provides an IDE for MicroBASIC, as well as the ability to simulate not only the PIC but also the circuit. pikloops relieves the drudgery of calculating delay loops.

Resources

Atmel AVR

Many developers prefer Atmel's AVR series because those parts enjoy the support of the complete suite of gcc based tools, including avr-gcc, avr-gcc-c++, avr-libc, avr-binutils, and avr-gdb. In addition, the avarice package provides an interface to Atmel's in-circuit emulator and the parts may be programmed using dfu-programmer, uisp or avrdude.

Resources

Intel 8051

The venerable 8051 is supported by dfu-programmer and uisp for programming, as well as the Small Device C Compiler (sdcc).

Resources

Zilog Z80

Fedora includes sjasm, a Z80 assembler, as well as the z88dk cross compiler. simcoupe is a simulator for the SAM Coupe, a Z80 based home computer from the 80's.

Resources

Small Device C Compiler

The Small Device C Compiler (sdcc) is a multi target compiler under rapid development. It offers support for the PIC16 and PIC18 parts from Microchip, as well as the Intel 8051, Maxim 80DS390, Zilog Z80 and the Motorola 68HC08. There is also limited support for a number of other processors.

Detailed information about sdcc can be found at http://sdcc.sourceforge.net.

Macro Assembler AS

AS is a portable macro cross assembler for a variety of microprocessors and -controllers. Though it is mainly targeted at embedded processors and single-board computers, you also find CPU families in the target list that are used in workstations and PCs.

AS is provided by the asl package.

Detailed info about AS can be found at http://john.ccac.rwth-aachen.de:8000/as/

Retrieved from "https://fedoraproject.org/w/index.php?title=Packages_For_Embedded_Development&oldid=211438"