From Fedora Project Wiki

m (Protected "Test Day:2010-04-13 Nouveau": spam magnet ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
 
(323 intermediate revisions by more than 100 users not shown)
Line 6: Line 6:
|-
|-
|}
|}
{{admon/note | Arriving after the date above? | If you come to this page after the test day is completed, your testing of Nouveau is still valuable, and you can use the information on this page to test Nouveau with your graphics card and provide feedback.  If you are visiting [[Releases/13/Schedule | after the release of Fedora 13]], please wait for the next Nouveau test day.}}


== What to test? ==
== What to test? ==


Today's installment of Fedora Test Day will focus on the Nouveau graphics driver for NVIDIA graphics cards.
Today's installment of Fedora Test Day will focus on the Nouveau graphics driver for NVIDIA graphics cards.
If you come to this page after the test day is completed, your testing of Nouveau is still valuable, and you can use the information on this page to test Nouveau with your graphics card and provide feedback.


== Who's available ==
== Who's available ==
Line 18: Line 19:
* Development - [[User:bskeggs| Ben Skeggs (IRC: darktama)]]
* Development - [[User:bskeggs| Ben Skeggs (IRC: darktama)]]
* Quality Assurance - [[User:Adamwill|Adam Williamson (IRC: adamw)]], [[User:campbecg|Chris Campbell (IRC: Tech33)]]
* Quality Assurance - [[User:Adamwill|Adam Williamson (IRC: adamw)]], [[User:campbecg|Chris Campbell (IRC: Tech33)]]


== What's needed to test ==
== What's needed to test ==
Line 89: Line 91:
! [[QA:Testcase_nouveau_fastuserswitch|Fast User Switching]]
! [[QA:Testcase_nouveau_fastuserswitch|Fast User Switching]]
! [[QA:Testcase_nouveau_vtswitch|VT switching]]
! [[QA:Testcase_nouveau_vtswitch|VT switching]]
! [[QA:Testcase_nouveau_suspend|Suspend/Resume]]
! [[QA:Testcase_nouveau_suspend|Suspend / Resume]]
! [[QA:Testcase_nouveau_compositing_manager|Compositing]]
! [[QA:Testcase_nouveau_compositing_manager|Compositing]]
! [[QA:Testcase_nouveau_multihead|Multihead]]
! [[QA:Testcase_nouveau_multihead|Multihead]]
Line 106: Line 108:
| N/A
| N/A
| N/A
| N/A
| 9400 GT (0641)
| GeForce
<references/>
|-
| [[User: Glaubitz | Adrian Glaubitz]]
| [http://www.smolts.org/client/show/pub_b8b82f06-562e-4c8c-8124-4b3a717d2f94 HW]
| PASS
| PASS
| PASS
| N/A
| PASS
| PASS
| PASS
| FAIL <ref>"Suspend" option not available in shutdown menu.</ref>
| PASS
| N/A <ref>No second display at the moment, sorry :(.</ref>
| GeForce  7600 GT [10de:02e0]
<references/>
|-
| [[User: Glaubitz | Adrian Glaubitz]]
| [http://www.smolts.org/client/show/pub_e2fdb465-32ba-4dbd-9e17-9f120cab193c HW]
| PASS
| PASS
| PASS
| [http://users.physik.fu-berlin.de/~glaubitz/renderchecklog-glaubitz-20100413-macbook.gz PASS]
| PASS
| PASS
| PASS
| PASS
| PASS
| N/A <ref>Don't have the adapter for an external display at hand :(.</ref>
| GeForce 9400M [10de:0863] (2009 13" Macbook, white)
<references/>
|-
| [[User: Glaubitz | Adrian Glaubitz]]
| [http://www.smolts.org/client/show/pub_12e020af-93e3-4c60-99e8-d21802ec500b HW]
| PASS
| PASS
| PASS
| [http://users.physik.fu-berlin.de/~glaubitz/renderchecklog-glaubitz-20100413-paco.gz PASS]
| untested
| PASS <ref>"Swtich User" option missing in personal menu of second user.</ref>
| PASS
| FAIL <ref>"Suspend" option not available in shutdown menu.</ref>
| untested
| FAIL <ref group="long">Desktop becomes very unresponsive in multi-head, mouse cursor jumps. Extended the desktop works, enabling mirroring scrambles all display contents and increases unresponsiveness further. Pretty much unusable.</ref>
| 8600 GTS [10de:0400]
<references/>
|-
| [[User: Glaubitz | Adrian Glaubitz]]
| [http://www.smolts.org/client/show/pub_bbe0587f-1496-4280-aa1a-811c7458d205 HW]
| PASS
| PASS
| PASS
| [http://users.physik.fu-berlin.de/~glaubitz/renderchecklog-glaubitz-20100413-acme.gz PASS]
| N/A
| PASS
| PASS
| PASS
| PASS
| PASS
| 6200 TC
<references/>
|-
| [[User:royboy626 | Ronald Luther Humble]]
| [http://www.smolts.org/client/show/pub_172f4cbb-b44b-4c48-b24c-de8f03d15d32 HW]
| PASS
| PASS <ref>Posted comment on minor totem flicker to bug {{bz|582070}}</ref>
| PASS
| [https://fedoraproject.org/w/uploads/1/10/Renderchecklog.tar.bz2 PASS]
| PASS
| N/A<ref group="long">from logout; selected switch user; dialog "The name org.gnome.DisplayManager was notprovided by any .service files". May be local. No bug filed.</ref>
| PASS
| N/A
| PASS
| N/A
| 7600 GT [10de:0391] Filed bug {{bz|582866}}
<references/>
|-
| [[User:Shnurapet | Misha Shnurapet]]
| [http://www.smolts.org/client/show/pub_38ef0f25-825d-4843-a966-7dc7059cfdc1 HW]
| PASS
| PASS <ref group="long">[http://shnurapet.fedorapeople.org/F13_Test_Days/nouveau_xvideo.png Black area] near the left border on each Pause. Disappears when starting to move the window.</ref>
| PASS
| [https://fedoraproject.org/w/uploads/5/57/Renderchecklog.tar.bz2 PASS]
| PASS
| PASS
| PASS
| PASS <ref group="long">Came back rapidly snowing (see [http://shnurapet.fedorapeople.org/F13_Test_Days/IMG_0976.JPG snapshot1], [http://shnurapet.fedorapeople.org/F13_Test_Days/IMG_0977.JPG snapshot2] and [http://shnurapet.fedorapeople.org/F13_Test_Days/IMG_0978.JPG snapshot3]) with a system lock-up when doing this test after the previous one. Freshly-booted, went fine.</ref> <ref>Unable to test hibernation, GUI/CLI command seems to be ignored.</ref>
| PASS
| PASS <ref group="long">Shows a corrupted image for several seconds before loading gdm. Fails to create a continuous display, though [http://pastebin.org/152148 xrandr output] is completely valid. Shows wallpapers on the smaller one but it is impossible to get on that display; the smaller one often flickers while actions are performed on the bigger one. gnome-display-properties detects the two monitors correctly. Creates a continuous display after playing around with settings. Rearrangement works, but the smaller one constantly flickers (sometimes even while moving the mouse cursor).</ref>
| 7300 GT
<references/>
<references/>
|-
|-
Line 179: Line 271:
| PASS
| PASS
| PASS
| PASS
|  
| PASS
| N/A
| N/A
| nVidia Corporation GeForce 6150SE nForce 430 (rev a2)
| nVidia Corporation GeForce 6150SE nForce 430 (rev a2)
Line 249: Line 341:
| PASS
| PASS
| PASS
| PASS
| [[https://fedoraproject.org/w/uploads/7/77/Renderchecklog.log renderchecklog]]
| [[https://fedoraproject.org/w/uploads/7/77/Renderchecklog.log PASS]]
| FAIL<ref>See http://pastebin.com/r4ETMXDf</ref>
| FAIL<ref>See http://pastebin.com/r4ETMXDf</ref>
| FAIL<ref>See http://pastebin.com/caNtK3yQ</ref>
| FAIL<ref>See http://pastebin.com/caNtK3yQ</ref>
Line 266: Line 358:
| PASS
| PASS
| PASS
| PASS
| [Media:Pfrields-renderchecklog-20100413.gz PASS]
| [https://fedoraproject.org/w/uploads/b/b9/Pfrields-renderchecklog-20100413.gz PASS]
|
| PASS
|
| PASS
|
| PASS
|
| PASS
|  
| PASS
|
| PASS<ref group="long">Erratic "tearing display" when X takes over from KMS, but fades smoothly into correct graphical display for login. No other problems noted throughout multihead testing.</ref>
| nVidia Corporation G86 [GeForce 8400M GS] [10de:0427] (rev a1)
| nVidia Corporation G86 [GeForce 8400M GS] [10de:0427] (rev a1)
<references/>
|-
|-
| [[User:Rombobeorn | Björn Persson]]
| [[User:Rombobeorn | Björn Persson]]
| [http://www.smolts.org/client/show/pub_88cd7ab2-c7c0-46b9-9a91-e7687128a21c HW]
| [http://www.smolts.org/client/show/pub_88cd7ab2-c7c0-46b9-9a91-e7687128a21c HW]
| FAIL <ref>See {{bz|581887}}</ref>
| FAIL <ref>See {{bz|581887}}</ref>
| PASS
| PASS¹²
| PASS ([http://www.rombobjörn.se/diverse/startx_output.txt output])
| PASS ([http://www.rombobjörn.se/diverse/startx_output.txt output])
| [https://fedoraproject.org/w/uploads/9/9e/Renderchecklog.nouveau.Rombobeorn.bz2 PASS]
| [https://fedoraproject.org/w/uploads/9/9e/Renderchecklog.nouveau.Rombobeorn.bz2 PASS]¹²
| PASS
| PASS¹²
|  
| PASS²
| PASS
| PASS¹²
| PASS
| PASS¹²
| PASS
| PASS¹²
|  
| PASS²
| nVidia Corporation G71 [GeForce Go 7900 GS] [10de:0298] (rev a1)
| nVidia Corporation G71 [GeForce Go 7900 GS] [10de:0298] (rev a1)
<references/>
<references/>
Because the basic test failed I did all the others with runlevel 3 and startx.
¹: runlevel 3 and startx<br />
²: without "rhgb" in the kernel command line
|-
|-
| [[User:Mjg | Michael J Gruber]]  
| [[User:Mjg | Michael J Gruber]]  
Line 341: Line 436:
| N/A
| N/A
| [https://fedoraproject.org/w/uploads/7/76/Renderchecklog-jsmith.gz PASS]  
| [https://fedoraproject.org/w/uploads/7/76/Renderchecklog-jsmith.gz PASS]  
| PASS
| FAIL (locked up after switching back to first user)
| N/A
| N/A
| N/A
| PASS
| N/A
| N/A
| PASS
| PASS
| N/A
| N/A
Line 397: Line 492:
| PASS
| PASS
| [https://fedoraproject.org/w/uploads/1/18/Renderchecklog-rbiba.gz PASS]
| [https://fedoraproject.org/w/uploads/1/18/Renderchecklog-rbiba.gz PASS]
| [https://bugzilla.redhat.com/show_bug.cgi?id=581945 ugly]
| FAIL <ref>See {{bz | 581945}} - ugly</ref>
| PASS
| PASS
| PASS
| PASS
Line 455: Line 550:
| PASS
| PASS
| [[Media:renderchecklog-ron.gz|PASS]]
| [[Media:renderchecklog-ron.gz|PASS]]
| PASS. But If I log out from the second user (instead of switching) I see a very short glimpse of the first users desktop right before the password box appears
| PASS. <ref group="long">But If I log out from the second user (instead of switching) I see a very short glimpse of the first users desktop right before the password box appears</ref>
| N/A
| N/A
| PASS
| PASS
Line 485: Line 580:
| PASS
| PASS
| FAIL
| FAIL
| FAIL (freeze on glxgears)
| FAIL <ref>freeze on glxgears</ref>
| PASS
| PASS
| PASS
| PASS
Line 499: Line 594:
| PASS
| PASS
| PASS
| PASS
|  
| FAIL
| PASS
| PASS
| PASS
| PASS
| PASS
| PASS
|  
| N/A
| PASS
| PASS
|  
|  
| nVidia Corporation G86M [Quadro NVS 150M] (rev a1) test on LiveCD x86_64
| nVidia Corporation G86M [Quadro NVS 150M] [10de:06ea] (rev a1) test on LiveCD x86_64 rendercheck seems to crash machine in various ways
|-
|-


Line 515: Line 610:
| N/A
| N/A
| PASS
| PASS
| FAIL (checkerboard pattern)
| FAIL <ref>checkerboard pattern</ref>
| PASS
| PASS
| PASS
| PASS
Line 555: Line 650:
| Al Thomas
| Al Thomas
| [http://www.smolts.org/client/show/pub_288ce958-0371-41cc-a6ae-b54eb10585af HW]
| [http://www.smolts.org/client/show/pub_288ce958-0371-41cc-a6ae-b54eb10585af HW]
| FAIL <ref>See {{https://bugzilla.redhat.com/show_bug.cgi?id=573096 | 573096}} and {{https://bugzilla.redhat.com/show_bug.cgi?id=517917 | 517917}}</ref>
| FAIL <ref>See {{bz | 573096}} and {{bz | 517917}}</ref>
| N/A
| N/A
| N/A
| N/A
Line 566: Line 661:
| N/A
| N/A
| nVidia Corporation NV18 [GeForce4 MX - nForce GPU] Used LiveDVD Fedora 13 Beta. Workaround for bug 573096 using nouveau_tv_disable=1 no longer stabilises image
| nVidia Corporation NV18 [GeForce4 MX - nForce GPU] Used LiveDVD Fedora 13 Beta. Workaround for bug 573096 using nouveau_tv_disable=1 no longer stabilises image
<references/>
|-
|-
| Michael Madore  
| Michael Madore  
Line 572: Line 668:
| PASS
| PASS
| PASS
| PASS
| [https://fedoraproject.org/w/uploads/c/cb/Renderchecklog-mmadore.gz PASS]
| N/A
| N/A
| N/A
| PASS
| N/A
| PASS
| N/A
| N/A
| N/A
| N/A
| N/A
Line 583: Line 679:
| Tom Diehl
| Tom Diehl
| [http://www.smolts.org/client/show/pub_679c1847-7973-45f1-aaaf-3b9af000190e HW]<ref>smolt profile was uploaded using my f12 system</ref>
| [http://www.smolts.org/client/show/pub_679c1847-7973-45f1-aaaf-3b9af000190e HW]<ref>smolt profile was uploaded using my f12 system</ref>
| Fail<ref>The login does come up but takes 30+ minutes and is real sluggish once I get the desktop.See {{https://bugzilla.redhat.com/show_bug.cgi?id=581934 | 581934}}</ref>
| Fail<ref>The login does come up but takes 30+ minutes and is real sluggish once I get the desktop.See {{bz | 581934}}</ref>
| Fail<ref>If I try to run gstreamer-properties abrt reports a crash. I am unable to get abrt up to see the failure info.</ref>
| Fail<ref>If I try to run gstreamer-properties abrt reports a crash. I am unable to get abrt up to see the failure info.</ref>
| N/A
| N/A
Line 594: Line 690:
| N/A
| N/A
| Dell XPS with nVidia Corporation Device 0a20 (rev a2) (prog-if 00 [VGA controller])
| Dell XPS with nVidia Corporation Device 0a20 (rev a2) (prog-if 00 [VGA controller])
<references/>
|-
|-
| Sisko
| Sisko
Line 609: Line 706:
| GeForce 7600 GS [10de:0392]
| GeForce 7600 GS [10de:0392]
|-
|-
 
| [[User:fishter | Fishter]]
| [http://www.smolts.org/client/show/pub_d26a4be9-fe81-4b8a-b6cf-d4e0aae46dfb HW]
| PASS
| N/A
| N/A
| N/A
| FAIL
| PASS
| PASS
| N/A
| N/A
| N/A
| GeForce FX Go5200 64M 10de:0324
|-
| Matej Zary
| [http://www.smolts.org/client/show/pub_d4da06a0-17be-471a-8565-60e2afd94be9 HW]
| PASS
| PASS
| PASS
| [http://magez.szm.com/fedora_testday/renderchecklog.gz PASS]
| FAIL <ref>See {{bz|581769}}</ref>
| PASS
| PASS
| N/A/FAIL<ref>System halted during the suspend process (graphical mode went off, console mode remained in halted state) - cold reset needed.</ref>
| PASS
| FAIL <ref>See {{bz|581956}}</ref>
| GeForce 6150SE nForce 430 Device 03d0, Nouveau TestDay Live AMD64 ISO image
<references/>
|-
| Adrian
| [http://www.smolts.org/client/show/pub_9665ab1f-12c6-46c3-9f07-4ba397cf4aa6 HW]
| PASS
| PASS
| PASS
| [https://fedoraproject.org/w/uploads/f/f8/Renderchecklog_bartelar.gz PASS]
| PASS
| PASS
| PASS
| N/A
| PASS
| N/A
| GeForce 6600 GT [10de:0140 (rev a2)]
|-
| [[User:przemal | Przemysław Palacz]]
| [http://www.smolts.org/client/show/pub_38f1fbd3-9dec-4699-a61c-0400cc178588 HW]
| FAIL<ref group="long">Monitor goes to sleep mode immediately after kernel is loaded, fedora continues to booting but display does not wake up. Passing nouveau.modeset=0 to kernel solves the problem.</ref>
| N/A
| N/A
| N/A
| N/A
| N/A
| N/A
| N/A
| N/A
| N/A
| Gigabyte GeForce 9600 GT (rev a1)
<references />
|-
| Kyle<ref>all tests done on dual-head DVI with the gfx test livecd</ref> <!-- kyle AT averageurl DOT com -->
| [http://www.smolts.org/client/show_all/pub_d5fed480-c4a0-48fa-90a3-16f002164459 HW]
| PASS
| PASS
| PASS
| [http://files.aboveaverageurl.com/misc/kb-renderchecklog.gz PASS]
| SLOW but PASS<ref>glxgears slows from 600FPS to ~50FPS; entire desktop extremely lagged; unusable</ref>
| PASS
| PASS
| [http://files.aboveaverageurl.com/misc/dmesg.gz FAIL]<ref group="long">Came back up, but fan speed was maxed. Desktop, despite not having compositioning enabled, took 20-30 seconds to respond to clicks. Mouse moved, but nothing changed for said time period. Multiple issues present in dmesg upon resume.</ref>
| PASS
| PASS
| nVidia Corporation GT200 [GeForce GTX 260] [10de:05e2] (rev a1)
<references />
|-
| Ty <!-- valis_1980@yahoo.com -->
| [http://www.smolts.org/client/show/pub_d9cb9a52-4ea9-4069-95ec-0b2c5d8b57cd HW]
| PASS
| PASS
| N/A
| [http://www.mediafire.com/file/nlzjzctj2zj/renderchecklog.gz PASS]
| [https://bugzilla.redhat.com/show_bug.cgi?id=582064 FAIL]
| PASS
| PASS
| N/A
| PASS
| N/A
| N/A
|-
| [[User:natalie | Natalie]]
| [http://www.smolts.org/client/show/pub_1111eb5b-1127-4019-8529-70d4468124e7 HW]
| PASS
| PASS
| PASS
| PASS
| PASS
| PASS
| PASS
| FAIL
| PASS
| N/A
| N/A
|-
| [[User:russianneuromancer | RussianNeuroMancer]]
| [http://www.smolts.org/client/show/pub_f200a101-d97a-4486-a7c5-f6d5c1e11f5b HW]
| PASS
| PASS
| N/A
| [http://sharebee.com/47165e17 PASS]
| PASS
| N/A
| PASS
| Suspend PASS
Hibernation FAIL
| FAIL
| N/A
| GeForce GT240
|-
| [[User:sergem | Sergem]]
| [http://www.smolts.org/client/show/pub_36b7b795-d898-47db-b5f6-885bde262c0a HW]
| PASS <ref>fan do not spin down</ref> <ref>[http://img153.imageshack.us/img153/1559/nouveauart1.png artifacts] when scrolling page in firefox overlapped by another window</ref> <ref>moving windows [http://img685.imageshack.us/img685/5783/nouveauwindowmove.png tearing]</ref>
| PASS
| PASS
| [https://fedoraproject.org/w/uploads/8/8a/Rendercheck2.log.gz PASS]
| PASS <ref>wobbling windows [http://img153.imageshack.us/img153/5310/glxwobbling.png tearing]</ref>
| PASS
| PASS
| PASS
| PASS
| PASS
| GeForce 8600 GTS
<references/>
|-
|-
| [[User:liangsuilong |Liang Suilong]]
| [http://www.smolts.org/client/show_all/pub_2cfd8066-d0ed-4131-bb9e-04bbdcc0c7bd HW]
| FAIL
| N/A
| N/A
| N/A
| N/A
| N/A
| N/A
| N/A
|
| N/A
| nVidia GeForce 8600GT (rev a1) test arch: x86_64
<references/>
|-
| Mark
| [http://www.smolts.org/client/show/pub_f9426fb6-6eb0-4457-b500-e767d2c26a43 HW]
| PASS
| PASS <ref>video flashes to black a I resize totem (strobe light effect)</ref>
| PASS
| [https://fedoraproject.org/w/uploads/1/10/Renderchecklog.gz PASS]
|
|
|
|
|
| N/A
| <references />
|-
| PaulWay
| [http://www.smolts.org/client/show/pub_6ba622a4-2b4d-41a5-b718-e06b4e9122d7 HW]
| PASS
| PASS
| PASS
| <ref>2024854 tests passed of 2124238 total</ref>
| ? (glx)
| ? (fastuserswitch)
| ? (vtswitch)
| ? (suspend)
| ? (composite)
| don't have multihead
|
|-
| [[User:buroteq |Cliff Cunnington]]
| HW <ref>smoltSendProfile failing with 500 server error. Will try later.</ref>
| PASS
| FAIL <ref group="long">Video plays perfectly, just some minor delay/refresh issues with desktop/window widgets. See {{bz|582168}} for details.
'''Update''': artifacting and refresh issues are not present when Compiz is switched on per OpenGL test - see {{bz|582168#6}}</ref>
| PASS
| [https://fedoraproject.org/w/uploads/f/f0/Btq-20100414-Renderchecklog.gz PASS]
| PASS
| PASS
| PASS
| N/A
| PASS
| N/A
| nVidia Corporation G98 [GeForce 8400 GS] (rev a1)
(Tests run with livecd/i686)
<references />
|-
| [[User:Kvikende]]
| [http://www.smolts.org/client/show/pub_b4bb3948-f9e1-47bd-8201-bc3fa5d8fc53 HW]
| PASS
| PASS
| PASS
| [https://fedoraproject.org/w/uploads/b/b6/Renderchecklog-laptor.txt PASS] <ref> Warning: forgot to compress</ref>
| N/A
| PASS
| PASS
| FAIL <ref>See {{bz|560444}}</ref>
| N/A
| N/A
| nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] (rev a1)
(Tests run with liveusb 64 bit)
<references />
|-
| [[User:Qux|qux]]
| [http://www.smolts.org/client/show_all/pub_ea86daeb-2250-4a4c-9848-7a86c60fbe94 HW] <ref>Profile sent from main installation, not from the tested one (gfx_test_week_20100412_x86-64 livecd)</ref>
| PASS
| FAIL <ref group="long">Widgets redrawing is a bit slow while returning from fullscreen or dragging Totem window (both with video playing), like in Cliff's report {{bz|582168}}</ref>
| PASS
| [https://fedoraproject.org/w/uploads/6/6e/Qux-20100414-renderchecklog.gz PASS]
| PASS <ref group="long">Didn't restart system because of livecd, only X restart done. Some slowness persists, but lighter than in 2nd test. Glxgears shows 140-290 FPS (1100-1200 on this system with proprietary driver and compiz enabled)</ref>
| PASS <ref>Only issue is a black screen with mouse cursor for several seconds before some switches (not all)</ref>
| PASS
| PASS
| PASS <ref>Ok, but windows moving isn't smooth even without cpu load by other tasks</ref>
| N/A
| 6600 (10de:0141)
<references/>
|-
| Shawn Bohrer
| [http://www.smolts.org/client/show/pub_778f0f94-91c0-450c-b14d-03243bd25e7d HW]<ref>smolt profile was uploaded using f12</ref>
| FAIL<ref>Fails to boot and displays thin white lines and dots with blinking cursor. See {{bz | 582271}}</ref>
| N/A
| N/A
| N/A
| N/A
| N/A
| N/A
| N/A
| N/A
| N/A
| 02:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 9600M GT [10de:0647] (rev a1)
<references/>
|-
| [[User:Thvdburgt | Thomas van der Burgt ]]
| [http://www.smolts.org/client/show/pub_34f13c80-07d1-44ae-8d17-ca8669460be5 HW]
| PASS
| PASS
| PASS
| [https://fedoraproject.org/w/uploads/3/3e/Thvdburgt_renderchecklog.gz PASS]
| PASS
| PASS <ref>Desktop is shown for a short amount of time before prompting for the user-password</ref>
| PASS
| FAIL <ref>See {{bz|582272}}</ref>
| PASS
| PASS
| Quadro NVS 140M (0429)
<references/>
|-
| ghayes
| [http://www.smolts.org/client/show/pub_bf9c8ccf-0a2b-43d0-9ba8-2ca119e11315 HW] <ref>Profile sent from tested live cd (livecd-i386-nouveau-200502020230.iso)</ref>
| PASS
| PASS
| PASS
| FAIL <ref>laptop locked up after a few min with black square with white square center in upper left of screen</ref>
| PASS <ref>only achieved glxgears of 620 fps</ref>
| PASS
| FAIL <ref group="long">Was logged into second user "test" from fast user switching. Did VT to F2 fine but when going back to F1 was on the logged in display of "liveuser" (should have been "test")</ref>
| FAIL <ref>Did suspend on resume CD spun then nothing every thing dead. Pressed resume button again and default boot happened</ref>
| N/A
| N/A
| nVidia Corporation G98M [Quadro NVS 160M] (rev a1) Tests run at 1024x768, could not change rsolution (did not try hard) native display reslolution is 1920x1200
<references/>
|-
| [[User:danielblueman|Daniel J Blueman]]
| [http://www.smolts.org/client/show/pub_e0626c03-5a54-45c1-a311-975d7746d32b nVidia Ion] 10de:087d rev b1
| PASS
| FAIL <ref>when pausing video, left 25% of frame is consistently clipped to black</ref><ref>when pausing in full-screen and going to windowed view, whole frame is black</ref>
| PASS
| [https://fedoraproject.org/w/uploads/a/a2/Rendercheck.log.bz2 FAIL] <ref>2079826 tests passed of 2124238 total</ref>
| PASS <ref>glxgears gives 200 FPS</ref>
| [https://fedoraproject.org/w/uploads/8/87/Blueman-nouveau-misrender.png FAIL] <ref>subsequently giving rendering artifacts; see attached shot</ref>
| PASS
| PASS
| PASS
| N/A
|
<references/>
|-
| [[User:danielblueman|Daniel J Blueman]]
| nVidia NV41 Quadro FX3450 10de:00cd rev a2
| FAIL <ref>when using video modes above 1024x768 on my BenQ MP720p projector via DVI-D, we get acute screen corruption - no problem with a radeon GPU</ref>
| PASS
| PASS
| [https://fedoraproject.org/w/uploads/d/d9/Blueman-quadrofx3450-Rendercheck.log.bz2 PASS] <ref>2124238 tests passed of 2124238 total</ref>
| PASS <ref>glxgears gives only 486 FPS</ref>
| PASS
| PASS
| FAIL <ref>when resuming, system boots up normally; unlikely related to graphics card driver though</ref>
| PASS
| PASS
| |
<references/>
|-
| apetz
| [http://www.smolts.org/client/show/pub_c8337875-3066-4d1d-8249-23086d8d7db5 HW]
| PASS
| PASS <ref>See {{bz|582168}}</ref>
| PASS
|
| PASS
| PASS
| PASS
| N/A
| PASS
|
| Quadro NVS 290 (rev a1)
<references/>
|-
| Tobias Jochmann
| [http://www.smolts.org/client/show/pub_d992dc78-f81a-4ace-9de8-06c8c0b72211 HW]
| PASS
| PASS
| PASS
| [https://fedoraproject.org/w/uploads/1/10/Renderchecklog.gz PASS]
| FAIL <ref>See {{bz|582379}}</ref>
| PASS
| PASS
| N/A
| PASS <ref>switching windows via ALT-TAB is slow, Window resizing is also slow</ref>
| N/A
| [0300]: nVidia Corporation GeForce 7050 PV / nForce 630a
<references/>
|-
| [[User:luya|Luya Tshimbalanga]]
| [http://www.smolts.org/client/show/pub_bd52860c-0c61-4d6a-b12d-edb2400b2ce5 HW]
| PASS
| PASS
| WIP
| <ref>[[File:Renderchecklog-luya.tar.xz]]</ref>
| PASS
| [[QA:Testcase_nouveau_fastuserswitch|Fast User Switching]]
| PASS
| N/A
| [[QA:Testcase_nouveau_compositing_manager|Compositing]]
| N/A
| Comments
|-
| Chriss Kalogeropoulos
| imac 24' nvidia 7600 GTX
| PASS
| PASS
| PASS
| PASS
| PASS
| PASS
| PASS
| N/A
| PASS
| N/A
| Comments
|-
| [[User:amir | Amir Hedayaty]]
| [http://www.smolts.org/client/show/pub_3b3ce6a0-4954-424a-9cb1-76093bd5754b HW]
| PASS
| PASS
| PASS
| PASS[https://fedoraproject.org/w/uploads/1/10/Renderchecklog.gz] <ref>took about an hour for me!</ref>
| PASS
| Fail
| PASS
| PASS
| PASS
| Fail (Sometimes hangs)
| nVidia Corporation G86 [GeForce 8400M GS] (rev a1)
<references/>
|-
| [[User:sergem | Sergem]]
| [http://www.smolts.org/client/show/pub_19f78e5f-67a4-4ba7-9576-84be953a4b90 HW]
| PASS <ref>artifacts when scrolling page in firefox overlapped by another window...</ref>
| PASS
| PASS
| [https://fedoraproject.org/w/uploads/b/b9/Rendercheck1.log.gz PASS]
| [http://img693.imageshack.us/img693/1664/glxcheckers.png FAIL] <ref>I was surprised but it can be [http://img693.imageshack.us/img693/1664/glxcheckers.png screenshoted] with usual PrintScreen</ref>
| PASS
| PASS
| PASS
| PASS
| N/A
| GeForce 6100 nForce 405
<references/>
|-
| [[User:verdurin | verdurin]]
| [http://www.smolts.org/client/show/pub_4ab95322-f14d-48a7-94d4-46a28cd7f24b HW]
| PASS
| PASS
| N/A
| N/A
| N/A
| N/A
| N/A
| N/A
| N/A
| N/A
| 9400 GT (0641)
<references/>
|-
| [[User:jlaska|jlaska]]
| [http://www.smolts.org/client/show/pub_823003ff-1b58-48ec-8b87-07fd9fea453e HW]
| PASS <ref>A little slow while refreshing the screen after window fullscreen or resize.  But no show stoppers or crashes or bad artifacts.</ref>
| PASS
| PASS
| PASS <ref>[[File:2010-04-13_Nouveau_test_day_-_jlaska_rendercheck.log.gz]]</ref>
| PASS
| FAIL <ref>{bz|582642}}  - mouse and keyboard no longer function at gdm-greeter when using desktop fast user switch</ref>
| PASS
| WARN <ref>Suspend works, however upowerd is unhappy</ref> <ref>{{bz|580570}}  - [abrt] crash in upower-0.9.2-1.fc13: Process /usr/libexec/upowerd was killed by signal 11 (SIGSEGV)</ref> <ref>{{bz|582664}}  - Brightness controls do not work after resume}}</ref>
| PASS
| PASS
| nVidia Corporation C79 [GeForce 9400M] (rev b1)
<references/>
|-
| [[User:mhlavink | Michal Hlavinka]]
| [http://www.smolts.org/client/show/pub_dffb6381-0143-4116-8c63-294567703534 HW]
| FAIL <ref>{{bz|582489}} there is garbage when switching from plymouth to gdm</ref>
| PASS
| FAIL <ref>{{bz|582606}} only black screen</ref>
| [https://fedoraproject.org/w/uploads/5/5e/RenderchecklogQuadroNVS290.gz LOG]
| PASS <ref>glxgears and tuxracer works, desktop effects in KDE don't</ref>
| PASS
| PASS
| PASS
| N/A <ref>I was not able to turn on KDE compositing - complained about graphic card</ref>
| FAIL<ref>{{bz|582617}} after leaving fullscreen, only one screen comes back</ref>
| nVidia Corporation G86 [Quadro NVS 290] [10de:042f] (rev a1) <reference<references/>
|-
| [[User:karmstrong | Kenny Armstrong]]
| [http://www.smolts.org/client/show/pub_6a8cc344-0387-43e2-9a07-5edb9bff1943 HW]
| PASS
| PASS
| PASS
| [https://fedoraproject.org/wiki/File:Rendercheclog.tar.bz2 PASS]
| PASS <ref>I tested this from the live Beta DVD, didn't even have to restart anything, it just worked after I installed the packages</ref>
| N/A
| PASS
| N/A
| N/A
| PASS
| nVidia Corporation GeForce 8600M GT (rev a1)<references/>
|-
| [[User:sandalle | Eric Sandall]]
| [http://www.smolts.org/client/show/?uuid=pub_7fa9ad65-3646-44ba-9a8d-c0fde21b65d1 HW]
| PASS
| PASS <ref>artifacts when leaving full-screen until it has time to refresh, artifacts (window border lags behind) while dragging windowed movie around</ref>
| PASS
| PASS <ref>[http://eric.sandall.us/archive/zip/renderchecklog-pub_7fa9ad65-3646-44ba-9a8d-c0fde21b65d1.gz renderchecklog.gz]</ref>
| PASS
| PASS
| PASS
| N/A
| PASS <ref>A little jumpy when moving windows around (especially Totem with a movie playing)</ref>
| N/A
|  nVidia Corporation G73 [GeForce 7300 GT] [10de:02e2] (rev a2) <references/>
|-
| [[User:sandalle | Eric Sandall]]
| [http://www.smolts.org/client/show/pub_f9649e68-5b74-4636-a137-be5de2fc2bbf HW]
| PASS
| PASS <ref>artifacts when leaving full-screen until it has time to refresh, artifacts (window border lags behind) while dragging windowed movie around</ref>
| [[QA:Testcase_nouveau_restartx|X restart]]
| PASS <ref>[http://eric.sandall.us/archive/zip/renderchecklog-pub_f9649e68-5b74-4636-a137-be5de2fc2bbf.gz renderchecklog.gz]</ref>
| [[QA:Testcase_nouveau_glx|OpenGL]]
| [[QA:Testcase_nouveau_fastuserswitch|Fast User Switching]]
| [[QA:Testcase_nouveau_vtswitch|VT switching]]
| [[QA:Testcase_nouveau_suspend|Suspend/Resume]]
| [[QA:Testcase_nouveau_compositing_manager|Compositing]]
| N/A
| nVidia Corporation G98 [GeForce 9300M GS] [10de:06e9] (rev a1) <references/>
|-
| [[User:giallu | Gianluca Sforna]]
| [http://www.smolts.org/client/show/pub_c63079b5-d4ec-4a56-a0b9-78e5c5a5064d HW]
| PASS
| PASS
| PASS
| FAIL <ref>PC freezes during rendercheck</ref>
| PASS
| PASS
| PASS
| N/A <ref>it seems I could not suspend from the LiveCD</ref>
| PASS
| N/A
| nVidia Corporation Quadro NVS 130M [10de:042a] (rev a1)
<references/>
|-
| [[User:jraber | Jeff Raber]]
| [http://www.smolts.org/client/show/pub_4c693c1b-8c5c-451b-95fc-0e229efd6dc0 HW]
| PASS <ref group="long">~10 screen 'flashes' during bootup + logon. Probing the monitor?.  They seemed to occur in groups of 3. Resolution was limited to 1024x768, but I blame corrupt EDID data from the monitor for that.</ref>
| FAIL <ref>Slight video corruption in totem when in fullscreen.  See {{bz|583365}}</ref>
| PASS
| PASS <ref>[[Media:renderchecklog.xz]]</ref>
| PASS
| N/A
| PASS <ref>There was an extra screen flash after switching back to X from a VT. </ref><ref>Unable to use desktop-effects after switching to a vt.  Error was No 3D support, despite the fact that compiz was still working.</ref>
| N/A
| PASS
| N/A
| nVidia Corporation G94 [GeForce 9600 GT] [10de:0622] (rev a1)<references/>
|-
| [[User:kkillebrew|Kathryn Killebrew]]
| [http://www.smolts.org/client/show/pub_63bf4006-c4cb-4cf3-bef2adc4ec06a243 HW]
| PASS
| PASS
| PASS
| PASS<ref>[https://fedoraproject.org/wiki/File:Renderchecklog_GeForceGT220.gz Renderchecklog_GeForceGT220.gz]</ref><ref>rendercheck hard-freezes system if run with compiz enabled</ref>
| PASS
| PASS
| PASS
| PASS<ref>resumed OK, but produced kernel backtrace (reported)</ref>
| PASS
| FAIL <ref>Only VGA detected if both VGA and HDMI connected.  See {{bz|583540}}</ref>
| nVidia GT216 [GeForce GT 220] [10de:0a20] (rev a2) (prog-if 00 [VGA controller])
<references/>
|-
| Ondrej Zary
| [http://www.smolts.org/client/show/pub_54679645-f69e-4adf-8f46-4f9671a6711f HW]
| PASS
| FAIL <ref>See {{bz|583690}}</ref>
| PASS
| FAIL <ref>See {{bz|583679}}</ref>
| PASS
| FAIL<ref>Broken outside of nouveau - "Switch User" option missing in personal menu of second user.</ref>
| PASS
| FAIL
| PASS
| PASS
| nVidia Corporation G73 [GeForce 7600 GS] [10de:02e1]
<references/>
|-
| Ondrej Zary
| [http://www.smolts.org/client/show/pub_3370f141-f455-4df0-9a71-025225253566 HW]
| PASS
| FAIL
| PASS
| FAIL<ref>slow and many errors</ref>
| N/A<ref>glxgears works but compiz does not because of no support for non-power-of-two textures</ref>
| FAIL<ref>Broken outside of nouveau - "Switch User" option missing in personal menu of second user.</ref>
| PASS
| FAIL
| PASS
| N/A
| nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] [10de:002d]
<references/>
|-
| Ondrej Zary
|
| PASS
| FAIL <ref>See {{bz|583690}}</ref>
| PASS
| FAIL<ref>slow and many errors</ref>
| PASS<ref>compiz broken with dual-head {{bz|584999}}</ref>
| FAIL<ref>Broken outside of nouveau - "Switch User" option missing in personal menu of second user.</ref>
| PASS
| FAIL
| PASS
| PASS
| nVidia Corporation NV44A [GeForce 6200] [10de:0221]
<references/>
|-
| Ondrej Zary
|
| PASS
| FAIL <ref>See {{bz|583690}}</ref>
| PASS
|
| FAIL<ref>{{bz|577142}}, compiz broken with dual-head {{bz|584999}}</ref>
| FAIL<ref>Broken outside of nouveau - "Switch User" option missing in personal menu of second user.</ref>
| PASS
| N/A
| PASS
| PASS<ref>VGA+composite TV out</ref>
| nVidia Corporation NV17 [GeForce4 MX 420] [10de:0172]
<references/>
|-
| Ondrej Zary
|
| PASS
| FAIL <ref>See {{bz|583690}}</ref>
| PASS
|
| FAIL<ref>{{bz|577142}}</ref>
| FAIL<ref>Broken outside of nouveau - "Switch User" option missing in personal menu of second user.</ref>
| PASS
| N/A
| PASS
| N/A
| nVidia Corporation NV11 [GeForce2 MX/MX 400] [10de:0110]
<references/>
|-
| Matej Zary
| [http://www.smolts.org/client/show/pub_eb4deaf2-45c6-4728-b983-9b64ff976728 HW]
| PASS
| PASS
| PASS
| FAIL <ref>Took more than an hour, a lot of errors in log. [http://magez.szm.com/fedora_testday/renderchecklog2.gz LOG] </ref> 
| PASS
| PASS
| PASS
| N/A
| PASS
| PASS
| nVidia Corporation G86 [GeForce 8400M G] [10de:0428]
<references/>
|-
| [[User:Renault | Charles-Antoine Couret]]
| [http://www.smolts.org/client/show/pub_084acde9-17ea-4778-b27c-665edece9492 HW]
| PASS
| PASS
| PASS
| [https://fedoraproject.org/wiki/File:Renderchecklog_Renault.gz FAIL]
| PASS
| PASS
| PASS
| PASS
| PASS
| N/A
| nVidia GeForce 8800 GTS 512Mo
<references/>
|-
! User
! User
! Smolt Profile
! Smolt Profile
Line 625: Line 1,342:
|}
|}


== Long comments ==
<references group="long" />


[[Category:Fedora 13 Test Days]]
[[Category:Fedora 13 Test Days]]

Latest revision as of 20:14, 19 October 2021

DATE TIME WHERE
Tue Apr 13, 2010 ALL DAY #fedora-test-day)
Arriving after the date above?
If you come to this page after the test day is completed, your testing of Nouveau is still valuable, and you can use the information on this page to test Nouveau with your graphics card and provide feedback. If you are visiting after the release of Fedora 13, please wait for the next Nouveau test day.


What to test?

Today's installment of Fedora Test Day will focus on the Nouveau graphics driver for NVIDIA graphics cards.

Who's available

The following cast of characters will be available for testing, workarounds, bug fixes, and general discussion.


What's needed to test

  • An NVIDIA graphics adapter. To confirm whether you have supporting hardware, run the following command:
    /sbin/lspci -d 10de: | grep -iq VGA && echo "Join Nouveau Fedora Test Day" || echo "No nVidia graphics hardware found." 
  • An updated Fedora 42 pre-release, or the special live image (see below)
  • Your hardware profile uploaded to Smolt according to these instructions
  • Make sure to back up your existing xorg.conf file, if you have one, so you can recover if the nouveau driver causes you trouble

How to test?

Update your machine

If you're running Fedora 42, make sure you have all the current updates for it installed, using the update manager. If you have any problems running the test, please also install these updated builds from Koji and re-test before reporting a failure:

  1. kernel
  2. mesa
  3. xorg-x11-drv-nouveau

Or you can use a live image:

Live image

Optionally, you may download a non-destructive Fedora 42 live image for your architecture. Tips on using a live image are available at FedoraLiveCD.

Architecture SHA256SUM
i686 494a2b235086f9f42cfd62eebef67b5158185c473fd0ebb8d3f8e8a34c160171
x86_64 fa1de3c207f000ba6212b39692395e2af71a8e7322aac5cb4a92989c24decb33

Test

Follow each of these test cases:

Multihead test case:

You will need two or more monitors to perform the multihead test.

Report your results

If you have problems with any of the tests, report a bug to Bugzilla usually for the component xorg-x11-drv-nouveau. If you are unsure about exactly how to file the report, just ask on IRC and we will help you. Follow the instructions on this page to ensure you include sufficient information in the report. Once you have completed the tests, add your results to the Results table below, following the example results from Sample user as a template. The first column should be your name with a link to your User page in the Wiki if you have one, and the second should be a link to your Smolt hardware profile (see above for a link with instructions on submitting your hardware profile to Smolt). For each test case, if your system worked correctly, simply enter the word PASS. If you had trouble, enter the word FAIL, with a footnote indicator, and put a link to the bug report in the comments column (as in the example line). If you could not perform one test (for example, you cannot perform the more advanced tests because the basic one fails, or you cannot perform the multihead test as you have only one display), enter the word N/A. In the comments column, you can enter the model name and PCI device ID (vendor ID is usually 10DE) of your card, if you know it - you can usually find this information in the output of the command lspci -nn.

Results

User Smolt Profile Basic test XVideo X restart Rendercheck OpenGL Fast User Switching VT switching Suspend / Resume Compositing Multihead Comments
Sample user HW PASS FAIL [1] N/A N/A N/A N/A N/A N/A N/A N/A GeForce
  1. See RHBZ #XXXXXX
Adrian Glaubitz HW PASS PASS PASS N/A PASS PASS PASS FAIL [1] PASS N/A [2] GeForce 7600 GT [10de:02e0]
  1. "Suspend" option not available in shutdown menu.
  2. No second display at the moment, sorry :(.
Adrian Glaubitz HW PASS PASS PASS PASS PASS PASS PASS PASS PASS N/A [1] GeForce 9400M [10de:0863] (2009 13" Macbook, white)
  1. Don't have the adapter for an external display at hand :(.
Adrian Glaubitz HW PASS PASS PASS PASS untested PASS [1] PASS FAIL [2] untested FAIL [long 1] 8600 GTS [10de:0400]
  1. "Swtich User" option missing in personal menu of second user.
  2. "Suspend" option not available in shutdown menu.
Adrian Glaubitz HW PASS PASS PASS PASS N/A PASS PASS PASS PASS PASS 6200 TC
Ronald Luther Humble HW PASS PASS [1] PASS PASS PASS N/A[long 2] PASS N/A PASS N/A 7600 GT [10de:0391] Filed bug RHBZ #582866
  1. Posted comment on minor totem flicker to bug RHBZ #582070
Misha Shnurapet HW PASS PASS [long 3] PASS PASS PASS PASS PASS PASS [long 4] [1] PASS PASS [long 5] 7300 GT
  1. Unable to test hibernation, GUI/CLI command seems to be ignored.
Gene Stuckey HW PASS FAIL [1] N/A N/A N/A PASS PASS N/A N/A GeForce 8400 GS (06e4)
  1. See RHBZ #579897
Mat Booth HW PASS PASS N/A N/A Slow, but PASS PASS PASS PASS PASS Quadro NVS 290
James Brown HW PASS PASS N/A PASS N/A N/A N/A N/A PASS GeForce 7300 GS
Steven Ward HW FAIL[1] PASS PASS N/A FAIL[2] N/A N/A N/A N/A VGA compatible controller [0300]: nVidia Corporation NV40 [GeForce 6800 GT] [10de:0045] (rev a1)
Carlo Marcelo Arenas Belon HW PASS PASS PASS PASS FAIL [1] PASS PASS PASS PASS N/A nVidia Corporation GeForce 6150SE nForce 430 (rev a2)
  1. See RHBZ #581769
Alan Lam HW FAIL FAIL PASS N/A PASS FAIL FAIL N/A PASS nVidia Corporation Device 087d (rev b1) ION
liam HW FAIL [1] N/A N/A N/A N/A N/A N/A N/A N/A nVidia Corporation Quadro NVS 140M (rev a1)
  1. failed booting to desktop on 04-11 liveCD
Rainer Koenig HW PASS N/A N/A N/A N/A N/A N/A N/A N/A nVidia Corporation Quadro FX4800 PCIe x16
Rainer Koenig HW FAIL N/A N/A N/A N/A N/A N/A N/A N/A nVidia Corporation Quadro NVS450 PCIe x16 (EE) [drm] failed to open device (EE) No devices detected.
Daniel Eikeland HW PASS PASS PASS [PASS] FAIL[1] FAIL[2] PASS N/A PASS nVidia Corporation G84M (Quadro NVS 140M) [10de:0429]

All tests performed with the Live CD

Paul W. Frields HW PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS[long 6] nVidia Corporation G86 [GeForce 8400M GS] [10de:0427] (rev a1)


Björn Persson HW FAIL [1] PASS¹² PASS (output) PASS¹² PASS¹² PASS² PASS¹² PASS¹² PASS¹² PASS² nVidia Corporation G71 [GeForce Go 7900 GS] [10de:0298] (rev a1)
  1. See RHBZ #581887

¹: runlevel 3 and startx
²: without "rhgb" in the kernel command line

Michael J Gruber HW PASS PASS PASS N/A PASS PASS PASS N/A N/A Quadro NVS 140M (rev a1)
Tom Wroblewski HW PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS nVidia G92 [GeForce 9800 GT} [10de:0614] (rev a2)
Rares Aioanei HW PASS PASS PASS PASS PASS PASS PASS N/A PASS NVIDIA GeForce 8400M GS)
Jared Smith HW PASS PASS N/A PASS PASS FAIL (locked up after switching back to first user) N/A PASS PASS N/A nVidia Corporation G84 [GeForce 8600M GT] (rev a1) on an Apple MacBook Pro 3,1
David Hall HW PASS PASS PASS PASS PASS PASS PASS PASS PASS nVidia Corporation G84 [GeForce 8600 GT] [10de:0402] (rev a1)
Paul Lange HW PASS PASS N/A N/A PASS N/A N/A N/A N/A PASS nVidia Corporation G96 [GeForce 9600M GT] [10de:0649] (rev a1)
Dan Horák HW PASS PASS PASS PASS PASS PASS PASS N/A PASS N/A nVidia Corporation GeForce 9500 GT (rev a1) [10de:0640]
Radek Bíba HW PASS PASS PASS PASS FAIL [1] PASS PASS PASS PASS PASS Quadro NVS 110M/GeForce Go 7300
Durand D'souza HW PASS PASS PASS FAIL PASS PASS PASS PASS PASS N/A nVidia 8600M GS

Rendercheck caused system to hard lock up so rebooting was the only option

Rares Aioanei HW PASS PASS PASS PASS PASS PASS PASS N/A PASS 03:00.0 VGA compatible controller: nVidia Corporation NV44 [GeForce 6200 TurboCache(TM)] (rev a1)

)

Rares Aioanei HW PASS PASS PASS PASS PASS PASS PASS N/A PASS 02:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8500 GT] (rev a1)
Rasmus Ory Nielsen HW PASS PASS PASS PASS PASS. [long 7] N/A PASS PASS PASS N/A nVidia Corporation G84M [Quadro NVS 140M] [10de:0429] (rev a1)
John Poelstra HW PASS PASS PASS PASS nVidia Corporation NV44 [Quadro NVS 285] (rev a1)
Alexei Panov HW PASS PASS PASS FAIL FAIL [2] PASS PASS PASS PASS N/A nVidia Corporation G92 [GeForce GTS 250] [0x10de:0x615] test on LiveCD x86_64
Ronny Buchmann HW PASS PASS PASS FAIL PASS PASS PASS N/A PASS nVidia Corporation G86M [Quadro NVS 150M] [10de:06ea] (rev a1) test on LiveCD x86_64 rendercheck seems to crash machine in various ways
Rusty Shackleford HW PASS PASS N/A PASS FAIL [3] PASS PASS PASS PASS N/A nVidia Corporation C67 [GeForce 7000M / nForce 610M] [10de:0533] (rev a2)
test on LiveCD x86_64
kho HW PASS PASS PASS PASS PASS PASS PASS N/A PASS PASS nVidia Corporation G86 [GeForce 8500 GT] (rev a1) test on LiveCD x86_64
Ted Roche HW PASS PASS PASS PASS PASS PASS PASS N/A N/A Lenovo 6459CTO ThinkPad T61 nVidia Corporation G84M [Quadro NVS 140M] [10de:0429] (rev a1)
Al Thomas HW FAIL [4] N/A N/A N/A N/A N/A N/A N/A N/A N/A nVidia Corporation NV18 [GeForce4 MX - nForce GPU] Used LiveDVD Fedora 13 Beta. Workaround for bug 573096 using nouveau_tv_disable=1 no longer stabilises image
  1. See RHBZ # 581945 - ugly
  2. freeze on glxgears
  3. checkerboard pattern
  4. See RHBZ # 573096 and RHBZ # 517917
Michael Madore HW PASS PASS PASS PASS N/A PASS PASS N/A N/A N/A 9400 GT (0641)
Tom Diehl HW[1] Fail[2] Fail[3] N/A N/A N/A N/A N/A N/A N/A N/A Dell XPS with nVidia Corporation Device 0a20 (rev a2) (prog-if 00 [VGA controller])
  1. smolt profile was uploaded using my f12 system
  2. The login does come up but takes 30+ minutes and is real sluggish once I get the desktop.See RHBZ # 581934
  3. If I try to run gstreamer-properties abrt reports a crash. I am unable to get abrt up to see the failure info.
Sisko HW PASS PASS PASS PASS N/A PASS PASS PASS PASS N/A GeForce 7600 GS [10de:0392]
Fishter HW PASS N/A N/A N/A FAIL PASS PASS N/A N/A N/A GeForce FX Go5200 64M 10de:0324
Matej Zary HW PASS PASS PASS PASS FAIL [1] PASS PASS N/A/FAIL[2] PASS FAIL [3] GeForce 6150SE nForce 430 Device 03d0, Nouveau TestDay Live AMD64 ISO image
  1. See RHBZ #581769
  2. System halted during the suspend process (graphical mode went off, console mode remained in halted state) - cold reset needed.
  3. See RHBZ #581956
Adrian HW PASS PASS PASS PASS PASS PASS PASS N/A PASS N/A GeForce 6600 GT [10de:0140 (rev a2)]
Przemysław Palacz HW FAIL[long 8] N/A N/A N/A N/A N/A N/A N/A N/A N/A Gigabyte GeForce 9600 GT (rev a1)
Kyle[1] HW PASS PASS PASS PASS SLOW but PASS[2] PASS PASS FAIL[long 9] PASS PASS nVidia Corporation GT200 [GeForce GTX 260] [10de:05e2] (rev a1)
  1. all tests done on dual-head DVI with the gfx test livecd
  2. glxgears slows from 600FPS to ~50FPS; entire desktop extremely lagged; unusable
Ty HW PASS PASS N/A PASS FAIL PASS PASS N/A PASS N/A N/A
Natalie HW PASS PASS PASS PASS PASS PASS PASS FAIL PASS N/A N/A
RussianNeuroMancer HW PASS PASS N/A PASS PASS N/A PASS Suspend PASS

Hibernation FAIL

FAIL N/A GeForce GT240
Sergem HW PASS [1] [2] [3] PASS PASS PASS PASS [4] PASS PASS PASS PASS PASS GeForce 8600 GTS
  1. fan do not spin down
  2. artifacts when scrolling page in firefox overlapped by another window
  3. moving windows tearing
  4. wobbling windows tearing
Liang Suilong HW FAIL N/A N/A N/A N/A N/A N/A N/A N/A nVidia GeForce 8600GT (rev a1) test arch: x86_64
Mark HW PASS PASS [1] PASS PASS N/A
  1. video flashes to black a I resize totem (strobe light effect)
PaulWay HW PASS PASS PASS [1] ? (glx) ? (fastuserswitch) ? (vtswitch) ? (suspend) ? (composite) don't have multihead
Cliff Cunnington HW [2] PASS FAIL [long 10] PASS PASS PASS PASS PASS N/A PASS N/A nVidia Corporation G98 [GeForce 8400 GS] (rev a1)

(Tests run with livecd/i686)

  1. 2024854 tests passed of 2124238 total
  2. smoltSendProfile failing with 500 server error. Will try later.
User:Kvikende HW PASS PASS PASS PASS [1] N/A PASS PASS FAIL [2] N/A N/A nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] (rev a1)

(Tests run with liveusb 64 bit)

  1. Warning: forgot to compress
  2. See RHBZ #560444
qux HW [1] PASS FAIL [long 11] PASS PASS PASS [long 12] PASS [2] PASS PASS PASS [3] N/A 6600 (10de:0141)
  1. Profile sent from main installation, not from the tested one (gfx_test_week_20100412_x86-64 livecd)
  2. Only issue is a black screen with mouse cursor for several seconds before some switches (not all)
  3. Ok, but windows moving isn't smooth even without cpu load by other tasks
Shawn Bohrer HW[1] FAIL[2] N/A N/A N/A N/A N/A N/A N/A N/A N/A 02:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 9600M GT [10de:0647] (rev a1)
  1. smolt profile was uploaded using f12
  2. Fails to boot and displays thin white lines and dots with blinking cursor. See RHBZ # 582271
Thomas van der Burgt HW PASS PASS PASS PASS PASS PASS [1] PASS FAIL [2] PASS PASS Quadro NVS 140M (0429)
  1. Desktop is shown for a short amount of time before prompting for the user-password
  2. See RHBZ #582272
ghayes HW [1] PASS PASS PASS FAIL [2] PASS [3] PASS FAIL [long 13] FAIL [4] N/A N/A nVidia Corporation G98M [Quadro NVS 160M] (rev a1) Tests run at 1024x768, could not change rsolution (did not try hard) native display reslolution is 1920x1200
  1. Profile sent from tested live cd (livecd-i386-nouveau-200502020230.iso)
  2. laptop locked up after a few min with black square with white square center in upper left of screen
  3. only achieved glxgears of 620 fps
  4. Did suspend on resume CD spun then nothing every thing dead. Pressed resume button again and default boot happened
Daniel J Blueman nVidia Ion 10de:087d rev b1 PASS FAIL [1][2] PASS FAIL [3] PASS [4] FAIL [5] PASS PASS PASS N/A
  1. when pausing video, left 25% of frame is consistently clipped to black
  2. when pausing in full-screen and going to windowed view, whole frame is black
  3. 2079826 tests passed of 2124238 total
  4. glxgears gives 200 FPS
  5. subsequently giving rendering artifacts; see attached shot
Daniel J Blueman nVidia NV41 Quadro FX3450 10de:00cd rev a2 FAIL [1] PASS PASS PASS [2] PASS [3] PASS PASS FAIL [4] PASS PASS
  1. when using video modes above 1024x768 on my BenQ MP720p projector via DVI-D, we get acute screen corruption - no problem with a radeon GPU
  2. 2124238 tests passed of 2124238 total
  3. glxgears gives only 486 FPS
  4. when resuming, system boots up normally; unlikely related to graphics card driver though
apetz HW PASS PASS [1] PASS PASS PASS PASS N/A PASS Quadro NVS 290 (rev a1)
  1. See RHBZ #582168
Tobias Jochmann HW PASS PASS PASS PASS FAIL [1] PASS PASS N/A PASS [2] N/A [0300]: nVidia Corporation GeForce 7050 PV / nForce 630a
  1. See RHBZ #582379
  2. switching windows via ALT-TAB is slow, Window resizing is also slow
Luya Tshimbalanga HW PASS PASS WIP [1] PASS Fast User Switching PASS N/A Compositing N/A Comments
Chriss Kalogeropoulos imac 24' nvidia 7600 GTX PASS PASS PASS PASS PASS PASS PASS N/A PASS N/A Comments
Amir Hedayaty HW PASS PASS PASS PASS[1] [2] PASS Fail PASS PASS PASS Fail (Sometimes hangs) nVidia Corporation G86 [GeForce 8400M GS] (rev a1)
  1. File:Renderchecklog-luya.tar.xz
  2. took about an hour for me!
Sergem HW PASS [1] PASS PASS PASS FAIL [2] PASS PASS PASS PASS N/A GeForce 6100 nForce 405
  1. artifacts when scrolling page in firefox overlapped by another window...
  2. I was surprised but it can be screenshoted with usual PrintScreen
verdurin HW PASS PASS N/A N/A N/A N/A N/A N/A N/A N/A 9400 GT (0641)
jlaska HW PASS [1] PASS PASS PASS [2] PASS FAIL [3] PASS WARN [4] [5] [6] PASS PASS nVidia Corporation C79 [GeForce 9400M] (rev b1)
  1. A little slow while refreshing the screen after window fullscreen or resize. But no show stoppers or crashes or bad artifacts.
  2. File:2010-04-13 Nouveau test day - jlaska rendercheck.log.gz
  3. {bz|582642}} - mouse and keyboard no longer function at gdm-greeter when using desktop fast user switch
  4. Suspend works, however upowerd is unhappy
  5. RHBZ #580570 - [abrt] crash in upower-0.9.2-1.fc13: Process /usr/libexec/upowerd was killed by signal 11 (SIGSEGV)
  6. RHBZ #582664 - Brightness controls do not work after resume}}
Michal Hlavinka HW FAIL [1] PASS FAIL [2] LOG PASS [3] PASS PASS PASS N/A [4] FAIL[5] nVidia Corporation G86 [Quadro NVS 290] [10de:042f] (rev a1) <reference
  1. RHBZ #582489 there is garbage when switching from plymouth to gdm
  2. RHBZ #582606 only black screen
  3. glxgears and tuxracer works, desktop effects in KDE don't
  4. I was not able to turn on KDE compositing - complained about graphic card
  5. RHBZ #582617 after leaving fullscreen, only one screen comes back
Kenny Armstrong HW PASS PASS PASS PASS PASS [1] N/A PASS N/A N/A PASS nVidia Corporation GeForce 8600M GT (rev a1)
  1. I tested this from the live Beta DVD, didn't even have to restart anything, it just worked after I installed the packages
Eric Sandall HW PASS PASS [1] PASS PASS [2] PASS PASS PASS N/A PASS [3] N/A nVidia Corporation G73 [GeForce 7300 GT] [10de:02e2] (rev a2)
  1. artifacts when leaving full-screen until it has time to refresh, artifacts (window border lags behind) while dragging windowed movie around
  2. renderchecklog.gz
  3. A little jumpy when moving windows around (especially Totem with a movie playing)
Eric Sandall HW PASS PASS [1] X restart PASS [2] OpenGL Fast User Switching VT switching Suspend/Resume Compositing N/A nVidia Corporation G98 [GeForce 9300M GS] [10de:06e9] (rev a1)
  1. artifacts when leaving full-screen until it has time to refresh, artifacts (window border lags behind) while dragging windowed movie around
  2. renderchecklog.gz
Gianluca Sforna HW PASS PASS PASS FAIL [1] PASS PASS PASS N/A [2] PASS N/A nVidia Corporation Quadro NVS 130M [10de:042a] (rev a1)
  1. PC freezes during rendercheck
  2. it seems I could not suspend from the LiveCD
Jeff Raber HW PASS [long 14] FAIL [1] PASS PASS [2] PASS N/A PASS [3][4] N/A PASS N/A nVidia Corporation G94 [GeForce 9600 GT] [10de:0622] (rev a1)
  1. Slight video corruption in totem when in fullscreen. See RHBZ #583365
  2. Media:renderchecklog.xz
  3. There was an extra screen flash after switching back to X from a VT.
  4. Unable to use desktop-effects after switching to a vt. Error was No 3D support, despite the fact that compiz was still working.
Kathryn Killebrew HW PASS PASS PASS PASS[1][2] PASS PASS PASS PASS[3] PASS FAIL [4] nVidia GT216 [GeForce GT 220] [10de:0a20] (rev a2) (prog-if 00 [VGA controller])
  1. Renderchecklog_GeForceGT220.gz
  2. rendercheck hard-freezes system if run with compiz enabled
  3. resumed OK, but produced kernel backtrace (reported)
  4. Only VGA detected if both VGA and HDMI connected. See RHBZ #583540
Ondrej Zary HW PASS FAIL [1] PASS FAIL [2] PASS FAIL[3] PASS FAIL PASS PASS nVidia Corporation G73 [GeForce 7600 GS] [10de:02e1]
  1. See RHBZ #583690
  2. See RHBZ #583679
  3. Broken outside of nouveau - "Switch User" option missing in personal menu of second user.
Ondrej Zary HW PASS FAIL PASS FAIL[1] N/A[2] FAIL[3] PASS FAIL PASS N/A nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] [10de:002d]
  1. slow and many errors
  2. glxgears works but compiz does not because of no support for non-power-of-two textures
  3. Broken outside of nouveau - "Switch User" option missing in personal menu of second user.
Ondrej Zary PASS FAIL [1] PASS FAIL[2] PASS[3] FAIL[4] PASS FAIL PASS PASS nVidia Corporation NV44A [GeForce 6200] [10de:0221]
  1. See RHBZ #583690
  2. slow and many errors
  3. compiz broken with dual-head RHBZ #584999
  4. Broken outside of nouveau - "Switch User" option missing in personal menu of second user.
Ondrej Zary PASS FAIL [1] PASS FAIL[2] FAIL[3] PASS N/A PASS PASS[4] nVidia Corporation NV17 [GeForce4 MX 420] [10de:0172]
  1. See RHBZ #583690
  2. RHBZ #577142, compiz broken with dual-head RHBZ #584999
  3. Broken outside of nouveau - "Switch User" option missing in personal menu of second user.
  4. VGA+composite TV out
Ondrej Zary PASS FAIL [1] PASS FAIL[2] FAIL[3] PASS N/A PASS N/A nVidia Corporation NV11 [GeForce2 MX/MX 400] [10de:0110]
  1. See RHBZ #583690
  2. RHBZ #577142
  3. Broken outside of nouveau - "Switch User" option missing in personal menu of second user.
Matej Zary HW PASS PASS PASS FAIL [1] PASS PASS PASS N/A PASS PASS nVidia Corporation G86 [GeForce 8400M G] [10de:0428]
  1. Took more than an hour, a lot of errors in log. LOG
Charles-Antoine Couret HW PASS PASS PASS FAIL PASS PASS PASS PASS PASS N/A nVidia GeForce 8800 GTS 512Mo
User Smolt Profile Basic test XVideo X restart Rendercheck OpenGL Fast User Switching VT switching Suspend/Resume Compositing Multihead Comments

Long comments

  1. Desktop becomes very unresponsive in multi-head, mouse cursor jumps. Extended the desktop works, enabling mirroring scrambles all display contents and increases unresponsiveness further. Pretty much unusable.
  2. from logout; selected switch user; dialog "The name org.gnome.DisplayManager was notprovided by any .service files". May be local. No bug filed.
  3. Black area near the left border on each Pause. Disappears when starting to move the window.
  4. Came back rapidly snowing (see snapshot1, snapshot2 and snapshot3) with a system lock-up when doing this test after the previous one. Freshly-booted, went fine.
  5. Shows a corrupted image for several seconds before loading gdm. Fails to create a continuous display, though xrandr output is completely valid. Shows wallpapers on the smaller one but it is impossible to get on that display; the smaller one often flickers while actions are performed on the bigger one. gnome-display-properties detects the two monitors correctly. Creates a continuous display after playing around with settings. Rearrangement works, but the smaller one constantly flickers (sometimes even while moving the mouse cursor).
  6. Erratic "tearing display" when X takes over from KMS, but fades smoothly into correct graphical display for login. No other problems noted throughout multihead testing.
  7. But If I log out from the second user (instead of switching) I see a very short glimpse of the first users desktop right before the password box appears
  8. Monitor goes to sleep mode immediately after kernel is loaded, fedora continues to booting but display does not wake up. Passing nouveau.modeset=0 to kernel solves the problem.
  9. Came back up, but fan speed was maxed. Desktop, despite not having compositioning enabled, took 20-30 seconds to respond to clicks. Mouse moved, but nothing changed for said time period. Multiple issues present in dmesg upon resume.
  10. Video plays perfectly, just some minor delay/refresh issues with desktop/window widgets. See RHBZ #582168 for details. Update: artifacting and refresh issues are not present when Compiz is switched on per OpenGL test - see RHBZ #582168#6
  11. Widgets redrawing is a bit slow while returning from fullscreen or dragging Totem window (both with video playing), like in Cliff's report RHBZ #582168
  12. Didn't restart system because of livecd, only X restart done. Some slowness persists, but lighter than in 2nd test. Glxgears shows 140-290 FPS (1100-1200 on this system with proprietary driver and compiz enabled)
  13. Was logged into second user "test" from fast user switching. Did VT to F2 fine but when going back to F1 was on the logged in display of "liveuser" (should have been "test")
  14. ~10 screen 'flashes' during bootup + logon. Probing the monitor?. They seemed to occur in groups of 3. Resolution was limited to 1024x768, but I blame corrupt EDID data from the monitor for that.