Revision as of 16:05, 14 February 2011

Description

UI testing.

Setup

Make sure you have a working FreeIPA server (see QA:Testcase_freeipav2_installation)
Make sure the CLI works as expected (see QA:Testcase_freeipav2_cli)

How to test

Authentication

Unauthenticated User

Remove all credentials using kdestroy and check with klist.
Open the Web UI.
An error message should appear.

Authenticated as Administrator

Authenticate as admin.
Open the Web UI.
At the top right corner it should say Administrator.
There should be 3 tabs: Identity, Policy, IPA Server.
The initial page should display a list of users.

Authenticated as User

Authenticate as admin.
Create a new user.
Set user's password.
Authenticate as the new user.
Open the Web UI.
The user's name should appear at the top right corner.
There should be 1 tab: Identity.
The initial page should display user's data.

Expired Credentials

Authenticate as admin or user using kinit.
Open the Web UI.
The UI should work normally.
Remove credentials using kdestroy.
Perform any action on the UI.
An error message should appear.
Authenticate again as admin or user.
Click Retry.
The action should complete successfully.

Users

Finding Users

As admin open the Web UI.
Go to Identity -> Users.
The page should display a list of all users.
The list should contain these columns: full name, user login, UID, email address, and telephone number.
Verify the list with the following command:

Above the list there should be a search field.
Enter a keyword which is the partial name of a known user, then click Find.
The list should show users with matching names.
Verify the list with the following command:

Empty the search field, then click Find.
The list should display all users again.

Adding Users

As admin open the Web UI.
Go to Identity -> Users.
The page should display a list of all users.
On the left click Add.
Enter user login, first name, and last name.
Click Add.
The list should now contain the new user.
Verify the addition with the following command:

Editing Users

As admin open the Web UI.
Go to Identity -> Users.
Click one of the users in the list.
The user details should be displayed.
Change the value of some attributes.
Undo the changes on some attributes.
On the left click Update, the undo links should disappear.
Click Back to List.
It should display the list of users.
Verify the changes with the following command:

Changing User Passwords

As admin open the Web UI.
Go to Identity -> Users.
Click one of the users in the list.
Under "Account Settings", click "reset password".
Enter a temporary password, then click "Reset Password".
Authenticate as the user and enter the temporary password. It will ask for a new password, enter a new password.

Reload the Web UI, it should show the self-service page for this user.

Deactivating and Reactivating Users

As admin open the Web UI.
Go to Identity -> Users.
Click one of the users in the list.
Under "Account Settings", the "Account disabled" should indicate that the user is initially Active.
Click Deactivate, the status should change to Inactive.
Authenticate as the user, it should fail.

Click Activate, the status should change back to Active.
Authenticate as the user, it should work.

Managing Group Enrollment

As admin open the Web UI.
Go to Identity -> Users.
Click one of the users in the list.
On the left under Member Of click User Groups.
The list of User Groups where the user is enrolled in should be displayed.
Click Enroll, a dialog box will appear.
Select some User Groups from the available list, then click >>.
Click Enroll, the selected User Groups should be added to the list.
Verify with the following command:

Select some User Groups from the list.
Click Delete, a dialog box will appear.
Click Delete, the selected User Groups should be deleted from the list.
Verify with the following command:

Deleting Users

As admin open the Web UI.
Go to Identity -> Users.
Check the checkboxes next to some of the users in the list.
On the left click Delete.
A confirmation message should appear showing the users to be deleted.
Click Delete, the selected users should disappear from the list.
Verify the deletion with the following command:

User Groups

Managing Member Users Enrollment

As admin open the Web UI.
Go to Identity -> Groups.
Click one of the groups in the list.
On the left under Member click Users.
The list of member users should be displayed.
Verify the member users with the following command:

Click Enroll, a dialog box will appear.
Select some users from the available list, then click >>.
Click Enroll, the selected users should be added to the list.
Verify the addition with the following command:

Select some users from the list.
Click Delete, a dialog box will appear.
Click Delete, the selected users should be deleted from the list.
Verify the deletion with the following command:

Managing Member Groups Enrollment

As admin open the Web UI.
Go to Identity -> Groups.
Click one of the groups in the list.
On the left under Member click User Groups.
The list of member groups should be displayed.
Verify the member groups with the following command:

Click Enroll, a dialog box will appear.
Select some groups from the available list, then click >>.
Click Enroll, the selected groups should be added to the list.
Verify the addition with the following command:

Select some groups from the list.
Click Delete, a dialog box will appear.
Click Delete, the selected groups should be deleted from the list.
Verify the deletion with the following command:

Managing Group Membership Enrollment

As admin open the Web UI.
Go to Identity -> Groups.
Click one of the groups in the list.
On the left under Member Of click User Groups.
The list of groups where this group is a member should be displayed.
Verify the group membership (member of groups) with the following command:

Click Enroll, a dialog box will appear.
Select some groups from the available list, then click >>.
Click Enroll, the selected groups should be added to the list.
Verify the addition with the following command:

Select some groups from the list.
Click Delete, a dialog box will appear.
Click Delete, the selected groups should be deleted from the list.
Verify the deletion with the following command:

Hosts

Finding Hosts

As admin open the Web UI.
Go to Identity -> Hosts.
The page should display a list of all hosts. Initially there is only one host which is the IPA server itself.
The list should contain these columns: hostname, description, enrolled and location.
Verify the list with the following command:

Above the list there should be a search field.
Enter a keyword which is the partial name of a known host, then click Find.
The list should show hosts with matching names.
Verify the list with the following command:

Empty the search field, then click Find.
The list should display all hosts.

Adding Hosts

As admin open the Web UI.
Go to Identity -> Hosts.
The page should display a list of all hosts.
On the left click Add.
Enter the hostname and select Force.
Click Add, the list should now contain the new host.
Verify the addition with the following command:

Editing Hosts

As admin open the Web UI.
Go to Identity -> Hosts.
Click one of the hosts in the list.
The host details should be displayed.
Change the host description, an undo link should appear.
On the left click Update, the undo links should disappear.
Verify the changes with the following command:

Managing Host Enrollment

As admin open the Web UI.
Go to Identity -> Hosts.
Create a new host (e.g. test.example.com), then view the host details. Don't use the IPA server's host for this.
Initially the enrollment status should say: Kerberos Key Not Present.
Verify the Keytab is False with the following command:

Get the host keytab using the following command:

Reload the host details page. The status should say: Kerberos Key Present.
Verify the Keytab is True with the following command:

Click Delete Key, Unprovision, a dialog box should appear.
Click Unprovision to confirm. The status should change back to: Kerberos Key Not Present.
Verify the Keytab is False with the following command:

Managing Host Certificate

As admin open the Web UI.
Go to Identity -> Hosts.
Create a new host (e.g. test.example.com), then view the host details. Don't use the IPA server's host for this.
Initially the certificate status should say: No Valid Certificate.
Verify there is no certificate with the following command:

Generate private key using the following command:

Generate CSR using the following command:

Open test.csr, copy the base-64 encoded CSR data not including the BEGIN/END CERTIFICATE REQUEST delimiters.
Click New Certificate, paste the CSR data.
Click Issue, the status should now say: Valid Certificate Present.
Verify new certificate is created with the following command:

Click Get, the base-64 encoded certificate should be displayed.
Verify the base-64 encoded certificate against the output of the previous command.
Close the dialog box. Click View, the certificate info should be displayed.
Verify the certificate info against the output of the previous command.
Close the dialog box.

Deleting Hosts

As admin open the Web UI.
Go to Identity -> Hosts.
Check the checkboxes next to some of the hosts in the list.
On the left click Delete.
A confirmation message should appear showing the hosts to be deleted.
Click Delete, the selected hosts should disappear from the list.
Verify the deletion with the following command:

Services

Managing Service Enrollment

As admin open the Web UI.
Go to Identity -> Services.
Create a new service (e.g. nfs/test.example.com), then view the service details. Don't use existing IPA services for this.
Initially the enrollment status should say: Kerberos Key Not Present.
Verify the Keytab is False with the following command:

Get the host keytab using the following command:

Reload the service details page. The status should say: Kerberos Key Present.
Verify the Keytab is True with the following command:

Click Delete Key, Unprovision, a dialog box should appear.
Click Unprovision to confirm. The status should change back to: Kerberos Key Not Present.
Verify the Keytab is False with the following command:

Managing Service Certificate

As admin open the Web UI.
Go to Identity -> Services.
Create a new service (e.g. nfs/test.example.com), then view the service details. Don't use existing IPA services for this.
Initially the certificate status should say: No Valid Certificate.
Verify there is no certificate with the following command:

Generate private key using the following command:

Generate CSR using the following command:

Open test.csr, copy the base-64 encoded CSR data not including the BEGIN/END CERTIFICATE REQUEST delimiters.
Click New Certificate, paste the CSR data.
Click Issue, the status should now say: Valid Certificate Present.
Verify new certificate is created with the following command:

Click Get, the base-64 encoded certificate should be displayed.
Verify the base-64 encoded certificate against the output of the previous command.
Close the dialog box. Click View, the certificate info should be displayed.
Verify the certificate info against the output of the previous command.
Close the dialog box.

HBAC Rules

Finding HBAC Rules

As admin open the Web UI.
Go to Policy -> HBAC.
The page should display a list of all HBAC rules.
The list should contain these columns: rule name, user category, host category, enabled, service category and source host category.
Above the list there should be a search field.
Enter a partial name of a known HBAC rule, then click Find.
The list should show HBAC rules with matching names.
Empty the search field, then click Find.
The list should display all HBAC rules.

Adding HBAC Rules

As admin open the Web UI.
Go to Policy -> HBAC.
The page should display a list of all HBAC rules.
On the left click Add.
Enter rule name and rule type.
Click Add.
The list should now contain the new HBAC rule.

Editing HBAC Rule's General Attributes

As admin open the Web UI.
Go to Policy -> HBAC.
Click one of the HBAC rules in the list.
The HBAC rule details should be displayed.
Under the General section change the value of some attributes.
Undo the changes on some attributes.
On the left click Update, the Undo links should disappear.

Editing HBAC Rule's Users

As admin open the Web UI.
Go to Policy -> HBAC.
Create a new HBAC rule, then edit it.
Initially the user category should be: Specified Users and Groups. The list of Users and User Groups should be empty.
On the Users list click Add, select some users, click >>, then click Enroll.
The users should be added into the list.
Select some users from the Users list, then click Remove.
A dialog box should appear listing the users to be deleted. Click Delete, the users should disappear from the list.
On the User Groups list click Add, select some groups, click >>, then click Enroll.
The groups should be added into the list.
Select some groups from the User Groups list, then click Remove.
A dialog box should appear listing the groups to be deleted. Click Delete, the groups should disappear from the list.
Change the user category to: Anyone. An undo link should appear. The Add/Remove links should become disabled.
Click Update, the undo link should disappear. The Users and User Groups lists should become empty.
Change the user category back to: Specified Users and Groups. An undo link should appear. The Add/Remove links should become enabled again.
Click Update, the undo link should disappear.

Editing HBAC Rule's Target Hosts
Editing HBAC Rule's Services
Editing HBAC Rule's Source Hosts
Deleting HBAC Rules

As admin open the Web UI.
Go to Policy -> HBAC.
Check the checkboxes next to some of the HBAC rules in the list.
On the left click Delete.
A confirmation message should appear showing the HBAC rules to be deleted.
Click Delete, the selected HBAC rules should disappear from the list.

HBAC Services

Finding HBAC Services

As admin open the Web UI.
Go to Policy -> HBAC -> HBAC Services.
The page should display a list of all HBAC services.
The list should contain these columns: service name and description.
Above the list there should be a search field.
Enter a partial name of a known HBAC service, then click Find.
The list should show HBAC services with matching names.
Empty the search field, then click Find.
The list should display all HBAC services.

Adding HBAC Services

As admin open the Web UI.
Go to Policy -> HBAC -> HBAC Services.
The page should display a list of all HBAC services.
On the left click Add.
Enter service name and description.
Click Add.
The list should now contain the new HBAC service.

Editing HBAC Services

As admin open the Web UI.
Go to Policy -> HBAC -> HBAC Services.
Click one of the HBAC services in the list.
The HBAC service details should be displayed.
Change the description. An Undo link should appear.
On the left click Update, the Undo links should disappear.

Deleting HBAC Services

As admin open the Web UI.
Go to Policy -> HBAC -> HBAC Services.
Check the checkboxex next to some of the HBAC services in the list.
On the left click Delete.
A confirmation message should appear showing the HBAC services to be deleted.
Click Delete, the selected HBAC services should disappear from the list.

HBAC Service Groups

Finding HBAC Service Groups

As admin open the Web UI.
Go to Policy -> HBAC -> HBAC Service Groups.
The page should display a list of all HBAC service groups.
The list should contain these columns: service group name and description.
Above the list there should be a search field.
Enter a partial name of a known HBAC service group, then click Find.
The list should show HBAC service groups with matching names.
Empty the search field, then click Find.
The list should display all HBAC service groups.

Adding HBAC Service Group

As admin open the Web UI.
Go to Policy -> HBAC -> HBAC Service Groups.
The page should display a list of all HBAC service groups.
On the left click Add.
Enter service group name and description.
Click Add.
The list should now contain the new HBAC service group.

Editing HBAC Service Groups

As admin open the Web UI.
Go to Policy -> HBAC -> HBAC Service Groups.
Click one of the HBAC service groups in the list.
The HBAC service group details should be displayed.
Change the description. An undo link should appear.
On the left click Update, the undo links should disappear.

Deleting HBAC Service Groups

As admin open the Web UI.
Go to Policy -> HBAC -> HBAC Service Groups.
Check the checkboxes next to some of the HBAC service groups in the list.
On the left click Delete.
A confirmation message should appear showing the HBAC service groups to be deleted.
Click Delete, the selected HBAC service groups should disappear from the list.

SUDO Rules

Finding SUDO Rules

As admin open the Web UI.
Go to Policy -> SUDO.
The page should display a list of all SUDO rules.
The list should contain these columns: rule name, description, command category.
Above the list there should be a search field.
Enter a partial name of a known SUDO rule, then click Find.
The list should show SUDO rules with matching names.
Empty the search field, then click Find.
The list should display all SUDO rules.

Adding SUDO Rules

As admin open the Web UI.
Go to Policy -> SUDO.
The page should display a list of all SUDO rules.
On the left click Add.
Enter rule name.
Click Add.
The list should now contain the new SUDO rule.

Editing SUDO Rule's General Attributes

As admin open the Web UI.
Go to Policy -> SUDO.
Click one of the SUDO rules in the list.
The SUDO rule details should be displayed.
Under the General section change the value of some attributes.
Undo the changes on some attributes.
On the left click Update, the undo links should disappear.

Editing SUDO Rule's Users

As admin open the Web UI.
Go to Policy -> SUDO.
Create a new SUDO rule, then edit it.
Initially the user category should be: Specified Users and Groups. The list of Users and User Groups should be empty.
On the Users list click Add, select some users, click >>, then click Enroll.
The users should be added into the list.
Select some users from the Users list, then click Remove.
A dialog box should appear listing the users to be deleted. Click Delete, the users should disappear from the list.
On the User Groups list click Add, select some groups, click >>, then click Enroll.
The groups should be added into the list.
Select some groups from the User Groups list, then click Remove.
A dialog box should appear listing the groups to be deleted. Click Delete, the groups should disappear from the list.
Change the user category to: Anyone. An undo link should appear. The Add/Remove links should become disabled.
Click Update, the undo link should disappear. The Users and User Groups lists should become empty.
Change the user category back to: Specified Users and Groups. An undo link should appear. The Add/Remove links should become enabled again.
Click Update, the undo link should disappear.

Editing SUDO Rule's Hosts
Editing SUDO Rule's Allow/Deny Commands

As admin open the Web UI.
Go to Policy -> SUDO.
Create a new SUDO rule, then edit it. Go to Run Commands section.
There should be 2 subsections: Allow and Deny.
The Allow subsection should have a command category.
Initially the command category should be: Specified Commands and Groups.
Iniitally the list of Allow Commands/Groups should be empty.
On the Allow Commands/Groups list click Add, select some commands/groups, click >>, then click Enroll.
The commands/groups should be added into the list.
Select some commands/groups from the Allow Commands/Groups list, then click Remove.
A dialog box should appear listing the commands/groups to be deleted. Click Delete, the commands/groups should disappear from the list.
The Deny subsection should not have a command category.
Initially the list of Deny Commands/Groups should be empty.
On the Deny Commands/Groups list click Add, select some commands/groups, click >>, then click Enroll.
The commands/groups should be added into the list.
Select some commands/groups from the Deny Commands/Groups list, then click Remove.
A dialog box should appear listing the commands/groups to be deleted. Click Delete, the commands/groups should disappear from the list.

Editing SUDO Rule's Run-As Users
Deleting SUDO Rules

As admin open the Web UI.
Go to Policy -> SUDO.
Check the checkboxes next to some of the SUDO rules in the list.
On the left click Delete.
A confirmation message should appear showing the SUDO rules to be deleted.
Click Delete, the selected SUDO rules should disappear from the list.

SUDO Commands

Finding SUDO Commands

As admin open the Web UI.
Go to Policy -> SUDO -> SUDO Commands.
The page should display a list of all SUDO commands.
The list should contain these columns: SUDO command and description.
Above the list there should be a search field.
Enter a partial name of a known SUDO command, then click Find.
The list should show SUDO commands with matching commands.
Empty the search field, then click Find.
The list should display all SUDO commands.

Adding SUDO Commands

As admin open the Web UI.
Go to Policy -> SUDO -> SUDO Commands.
The page should display a list of all SUDO commands.
On the left click Add.
Enter SUDO command and description.
Click Add.
The list should now contain the new SUDO commands.

Editing SUDO Commands

As admin open the Web UI.
Go to Policy -> SUDO -> SUDO Commands.
Click one of the SUDO commands in the list.
The SUDO command details should be displayed.
Change the description. An Undo link should appear.
On the left click Update, the Undo link should disappear.

Deleting SUDO Commands

As admin open the Web UI.
Go to Policy -> SUDO -> SUDO Commands.
Check the checkboxes next to some of the SUDO commands in the list.
On the left click Delete.
A confirmation message should appear showing the SUDO commands to be deleted.
Click Delete, the selected SUDO commands should disappear from the list.

SUDO Command Groups

Finding SUDO Command Groups

As admin open the Web UI.
Go to Policy -> SUDO -> SUDO Command Groups.
The page should display a list of all SUDO command groups.
The list should contain these columns: SUDO command group and description.
Above the list there should be a search field.
Enter a partial name of a known SUDO command group, then click Find.
The list should show SUDO command groups with matching names.
Empty the search field, then click Find.
The list should display all SUDO command groups.

Adding SUDO Command Groups

As admin open the Web UI.
Go to Policy -> SUDO -> SUDO Command Groups.
The page should display a list of all SUDO command groups.
On the left click Add.
Enter SUDO command group and description.
Click Add.
The list should now contain the new SUDO command groups.

Editing SUDO Command Groups

As admin open the Web UI.
Go to Policy -> SUDO -> SUDO Command Groups.
Click one of the SUDO command groups in the list.
The SUDO command group details should be displayed.
Change the description. An Undo link should appear.
On the left click Update, the Undo link should disappear.

Deleting SUDO Command Groups

As admin open the Web UI.
Go to Policy -> SUDO -> SUDO Command Groups.
Check the checkboxes next to some of the SUDO command groups in the list.
On the left click Delete.
A confirmation message should appear showing the SUDO command groups to be deleted.
Click Delete, the selected SUDO command groups should disappear from the list.

Role Based Access Control

Add subtree permission

In tabs click IPA Server->Role Based Access Control
In left panel click Permission
Click Add
set the following fields:
- permission name:sample-subtree-permission
- rights: write
- Target On: Query
- ldap:///cn=*,cn=roles,cn=accounts,dc=example,dc=com
Click Add and Add Another
Fields should blank out and be set back to filter

Add filter permission

set the following fields:
- permission name:sample-filter-permission
- rights: write
- Target On: Filter
- ou=engineering
Click Add and Add Another
Fields should blank out and be set back to filter

Add target group permission

set the following fields:
- permission name:sample-targetgroup-permission
- rights: write
- Target On: targetgroup
- group:editors
Click Add
Permissions List will update with three new permissions at the end: sample-subtree-permission sample-filter-permission sample-targetgroup-permission

Add type permission

Click add in left Panel:
set the following fields:
- permission name:sample-type-permission
- rights: write
- Target On: type
- Type: user
- attributes: scroll down and click title
Click Add and Edit
Settings page should display. The type select box should be displayed and set to user, the checkbox next to the title attribute should be checked

Add privilege and assign permissions

Click privileges in the left panel
click on the add button
Fill in the following fields
- Name: sample-privilege
- Description: Privilege for testing purposes only.
click Add and Edit
the privilege settings page should show.
in the left panel, under Member Of, click Permissions
Click enroll
type sample into the text box at the top of the dialog and click Find
the left column labeled Available should show the four permissions created above
click the checkbox next to the word "Permissions" in the left column
all the check boxes in the white area should now be checked
click >>
he selected permissions should move to to the right column, labeled prospective
click enroll
the list should now show the four permissions that start with sample

Delete assigned permission

click the checkbox next to sample-filter-permission
click the deletebutton in the left panel
a dialog box should show the selelcted permission
click delete
the dialog box should close, and a spinner should briefly appear, then the selected permission should disappear from the list.

Create role and assign permissions

In the left panel, click roles
The list should be prepopulated with some entires.
In he left panel, click the add button
A dialog should open up
fill out the following values:
- Role Name: sample-role
- Description: role for testing only
click add
the role sample-role should be appended to the list
click the hyperlink sample-role
the role details page should appear, with the name and description
in the left panel, under member of click 'Privileges'
the list should be empty.
in the left panel, click the enroll button
in the text box at the top of the dialog, type sample
Click the find button
The left column labeled privileges should reduce to a single entry, sample-privilege
click the checkbox next to sample-privilege
click >>
click the enroll button
The dialog should close, and the list should update with the sample-privilege
click the hyperlink 'sample-privilege
the privilege settings page should display with the information for sample-privilege

Delete permission assignment

You should still be on the settings page for sample-privilege
In the left panel, under the word Member of click on the word permissions
the four permissions starting with the word sample should be listed
click the checkbox at the next to the word sample-type-permission
click the delete button in the left panel
the sample-type-permission value should be removed from the list

Delete permissions

in the left panel, click the word permissions
the permission list should show.
in the text field at the tope of the page, type the word sample
click the find button
the list should be reduced to the four permissions starting with the word sample
click the checkbox at the top of the page to select all four permissions
click delete
the list should be empty

Self Service Permissions

Verify that we can add and remove permissions for users to perform self service on various attributes

open browser
navigate to http://server.ipa.example.com
Click IPA Server tab
Click Self Service Permissions tab:
Self Service Permisions should be listed, with only one value in there: user can change own password
Click add
set to following fields
- Self-Service name: change-homedir
- Under attributes, homedirectory
Click Add and Edit
Close browser

open browser, login as psmith
user settings page should be displayed. home directory field should now be editable.

close broweser

open browser. go to IPA Server->Self Service Permissions
click checkbox next to change-homedir
click delete
Close browser
kinit psmith
open browser, login as psmith
user settings page should be displayed. home directory field should not be editable anymore.

Delegation

Verify that users assigned to one group can be delegated authority to modify fields for members of another group.

open browser. go to http://server.ipa.example.com
click IPA server Top tab
click Delegation subtab
Should be on delegation list page, and the list should be empty
Click Add
Fill out the following fileds with the specified values
- DelegationName: title-delegate
- scroll down and click title
- User Group: click editors
- Member User group: click ipausers
Click add and edit.
Settyings page should be displayed. Values should be what they were set on 'add'
Go to Indentity->User tab.
select user psmith
User settings page for psmith should show.
click on user Groups in the left panel
click on the enroll button in the left panel
- select group editors
- click >> to move that to the right list of enrollments.
- click enroll
click on Back to List
create another user with uid of ptownshend
close browser

open browser
go to http://server.ipa.example.com
you should be on the psmith user page. click "Back to List"
you should be on the user list page
select user ptownshend
You should be on that user settings page for ptownshend. Most of the fields should be unwritable, but the title field should be editable.
Add the value "Lead Guitar" and click update.
Click Back to list
The Title field for the user ptownsend should say "Lead Guiter"

Undo and Reset

Verify that the Undo and Reset links can be used to revert attribute values.

As admin or user open the Web UI.
Open one of the details page (e.g. go to Identity -> Users, click one of the users).
Change the value on some of the attributes. An Undo link should appear next to each of the attribute changed.
Click the Undo link, the attribute should revert to the original value.
Click the Reset link, all attributes should revert to the original values, all Undo links should disappear.

Expected Results

All the test steps should end with the specified results.

@@ Line 1,132: / Line 1,132: @@
 |results=
-# All the test steps should end with the specified results.
+All the test steps should end with the specified results.
 }}

Search

QA:Testcase freeipav2 ui: Difference between revisions

Revision as of 16:05, 14 February 2011

Contents

Description

Setup

How to test

Authentication

Users

User Groups

Hosts

Services

HBAC Rules

HBAC Services

HBAC Service Groups

SUDO Rules

SUDO Commands

SUDO Command Groups

Role Based Access Control

Self Service Permissions

Delegation

Undo and Reset

Expected Results