No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
{{QA/Test_Case | {{QA/Test_Case | ||
|description=Set up Floating IPs with OpenStack | |description=Set up Floating IPs with OpenStack | ||
| Line 47: | Line 45: | ||
$> cd ~/novacreds | $> cd ~/novacreds | ||
$> ssh -i nova_key.priv -o UserKnownHostsFile=/dev/null root@192.168.122.150 | $> ssh -i nova_key.priv -o UserKnownHostsFile=/dev/null root@192.168.122.150 | ||
{{admon/note|VM limitations|Note if running openstack within a VM, then the floating address will not be accessible from outside (probably due to the iptables NAT being bypassed by the bridge (ebtables) rules within the VM)}} | |||
Check for new errors in the logs: | Check for new errors in the logs: | ||
Revision as of 13:10, 20 October 2011
Description
Set up Floating IPs with OpenStack
Setup
Follow QA:Testcase_launch_an_instance_on_OpenStack
Make sure that nova is configured with the correct public network interface. The default is eth0, but you can change it like:
$> echo '--public_interface=em1' | sudo tee -a /etc/nova/nova.conf $> sudo service openstack-nova-network restart
Ensure that ICMP (ping) and SSH are allowed to your instances.
$> euca-authorize -P icmp -t -1:-1 default $> euca-authorize -P tcp -p 22 default
How to test
If you've followed all of the test cases, the private network used for OpenStack instances is 10.0.0.0/24. The purpose of this functionality is to be able to assign a pool of floating public IP addresses to instances, as well.
The details of this test case are a bit specific to the environment you are using to test. For this documentation, we're going to assume that the the OpenStack server's public interface is on the 192.168.122.0/24 subnet. We are going to take an unused address from this subnet, 192.168.122.150, and define it as a floating IP address to be used by OpenStack.
$> sudo nova-manage floating create 192.168.122.150/31
Allocate an address to use for an instance:
$> euca-allocate-address ADDRESS 192.168.122.150
Associate the allocated address with a running instance:
$> euca-associate-address -i i-00000001 192.168.122.150 ADDRESS 192.168.122.150 i-00000001
Expected Results
Verify that the public IP address got assigned to your public network interface on the OpenStack server.
$> ip addr ... 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 52:54:00:db:c8:51 brd ff:ff:ff:ff:ff:ff inet 192.168.122.58/24 brd 192.168.122.255 scope global eth0 inet 192.168.122.150/32 scope global eth0
Verify that you can now ssh into the instance using the newly assigned address:
$> cd ~/novacreds $> ssh -i nova_key.priv -o UserKnownHostsFile=/dev/null root@192.168.122.150
Note if running openstack within a VM, then the floating address will not be accessible from outside (probably due to the iptables NAT being bypassed by the bridge (ebtables) rules within the VM)
Check for new errors in the logs:
$> grep -i error /var/log/nova/*.log
If you would like, you can now disassociate and release the address assigned for testing.
$> euca-disassociate-address 192.168.122.150 ADDRESS 192.168.122.150 $> euca-release-address 192.168.122.150 ADDRESS 192.168.122.150