From Fedora Project Wiki
m (Removed the link to additional information in a note)
Line 37: Line 37:
/usr/lib/httpd/modules:: The location of various Apache modules, loaded on demand from the main configuration file.
/usr/lib/httpd/modules:: The location of various Apache modules, loaded on demand from the main configuration file.


/var/www:: Default location for storing web site content.
/var/www:: Default location for storing web site content, referred to as <code>DocumentRoot</code>.


/var/log/httpd:: The location of the Apache log files.
/var/log/httpd:: The location of the Apache log files.

Revision as of 04:12, 6 February 2013

Apache web server

Installing Apache Web Server

The basic Apache functionality, serving static web sites, is provided by the httpd rpm package. To install Apache, run:

su -c "/usr/bin/yum install httpd"

Unless the requirement is to run a very basic web site, the more convenient way of installing the Apache web server is:

su -c "/usr/bin/yum groupinstall 'Web Server'"

In addition to thehttpd package, the command above installs software needed to run Apache with the support for database driven web sites, support for common web scripting languages, such as PHP, perl, and python, Apache documentation provided by httpd-manual rpm package and support for serving secure, encrypted content through HTTPS protocol.

The Web Server package group can be installed during Fedora installation, using the option to customize software packages."

To start the Apache server, run:

 su -c "systemctl start httpd.service"

To test the correct operation of the Apache server, point the web browser to http://localhost. If the browser displays Fedora Test Page, the Apache is installed correctly.

To configure the Apache server to start at the boot time, run:

su -c "systemctl enable httpd.service"

Configuring Apache web server

There are a few characteristic directories that contain files needed for proper operation of the Apache web server:

/etc/httpd:: The location of Apache configuration files, referred to as ServerRoot.

/usr/lib/httpd/modules:: The location of various Apache modules, loaded on demand from the main configuration file.

/var/www:: Default location for storing web site content, referred to as DocumentRoot.

/var/log/httpd:: The location of the Apache log files.

The main Apache configuration file is /etc/httpd/conf/httpd.conf. At the minimum, there are only two directives in this file that need to be specified to enable Apache to serve the content over the Internet, The name to which server responds and the location of the web site content on the system. To serve the web content for www.example.com, these two entries are:

ServerName www.example.com:80
DocumentRoot "/var/www/html"

Reload the configuration file for these changes to take effect:

su -c "systemctl reload httpd.service"
This configuration assumes that www.example.com resolves correctly in DNS and that the content for the web site is in the /var/www/html, the default DocumentRoot in Fedora."

/etc/httpd/conf/httpd.conf file includes instructions for almost all of the configuration options in the form of comments, ie. the lines beginning with # character. This feature makes the configuration file very long and does not allow quick changes to it. However, the Include directive within a file provides a way for splitting the configuration file into smaller, more manageable sections. The line:

Include conf.d/*.conf

causes the httpd daemon to read all *.conf files placed in the /etc/httpd/conf.d directory, in addition to to a main configuration file, during start up process. The common use of conf.d/*.conf files is to have separate configuration files for various Apache extensions or virtual hosts.

/etc/httpd/conf/httpd.conf includes numerous options for configuring the Apache web server. Other notable options are:

  • Performance tuning:
  • MaxClients limits the number of allowed simultaneous connections to the server and works together with the ServerLimit option.
  • KeepAlive allows for a number of concurrent HTTP requests over a single TCP connection.
  • TimeOut instructs the httpd daemon when to stop responding if it is under heavy load.
Apache performance tuning is the art of managing the trade-off against the benefit. It requires good understanding of the server's capabilities and seldom improves by including arbitrary parameters.
  • Log configuration:
  • ErrorLog points to the location where the server's errors are logged.
  • LogLevel sets the verbosity of the ErrorLog entries.
  • CustomLog points to the location where the requests are logged.
The Apache web server logs the requests and errors to /var/log/httpd/access_log and /var/log/httpd/error_log by default.
  • Other configuration options:
  • AddLanguage associates files with certain extension to certain languages. Useful when the web server serves pages in multiple languages.
  • LoadModule loads dynamically shared objects.
  • ScriptAlias specifies the location of CGI scripts.
  • ServerAdmin specifies who is the server administrator.
  • AddHandler maps scripts to script handlers, such as .cgi, .php, etc.
Refer to the Apache documentation in the Additional Information section for the extensive list of the Apache configuration options and their usage.

Virtual Hosts

The Apache web server has the ability to serve the content for multiple sites from the single server through the concept of Virtual Hosts. Virtual hosts can be configured in two ways:

  • IP based Virtual Hosts:
  • Each virtual host has its own IP address and port combination.
  • Required for serving HTTPS requests, due to restrictions in the SSL protocol.
  • Name based Virtual Hosts:
  • All virtual hosts share the common IP address.
  • The Apache web server responds to the request by mapping the host header in the request to ServerName and ServerAlias directives in the particular virtual host's configuration file.

The example of the simple name based virtual hosts configuration:

# global configuration options
NameVirtualHost *:80
<VirtualHost *:80>
ServerName localhost
</VirtualHost>

<VirtualHost *:80>
ServerName example.com
ServerAlias www.example.com
DocumentRoot /var/www/virtual/example.com/html
</VirtualHost>

<VirtualHost *:80>
ServerName foobar.com
ServerAlias www.foobar.com
DocumentRoot /var/www/virtual/foobar.com/html
</VirtualHost>

The order in which the virtual hosts are listed is significant to the extent that the Apache will always serve the content from the first listed virtual host in case the request was made for the site that is resolvable in DNS but not defined as a ServerName or a ServerAlias.

Once the first VirtualHost is defined, all of the content served by Apache must also be moved into virtual hosts.

Security Considerations

Apache File Security

By default, the httpd daemon runs as the user and group apache. Therefore, all files that the httpd needs to access to operate properly must be accessible by user apache. The safe way to accomplish this is to set the ownership on all of the files to another user and allow read-only access to all other users. For example, to allow read-only access to www.foobar.com content, so it can be served over the Internet, run the following:

su -c "/bin/chown -R root.root /var/www/virtual/foobar.com"
su -c "/bin/chmod 755 /var/www/virtual/foobar.com /var/www/virtual/foobar.com/html"
su -c "/bin/chmod 644 /var/www/virtual/foobar.com/html/*"

In case the content should be readable by the Apache and nobody else, the good practice is to change the group ownership to group apache and deny access to others.

User-level ownership on files should be granted to the apache user only if the web server is expected to modify the files, for example, through the use of CGI scripts.

Apache Access Controls

To control the access to the content served by the Apache web server, use the Order, Deny, and Allow directives, within the Directory container directive. To allow access to the content of www.foobar.com:

<Directory /var/www/virtual/foobar.com/html>
Order deny,allow
</Directory>

The Order directive controls the behavior of how the access to the content is evaluated and sets the default precedence if Allow and Deny directives are not defined:

  • Order deny,allow defaults to "allow access"
  • Order allow,deny defaults to "deny access"

The latter value always overrides the former. For example, to allow access to all hosts on the 192.168.1 subnet and deny the host with the 192.168.1.66 IP address, add these options:

<Directory /var/www/virtual/foobar.com/html/priv>
Order allow,deny
Allow from 192.168.1.
Deny from 192.168.1.66
</Directory>

SELinux Notes

The best way to avoid SELinux errors while running Apache is to store the Apache related files in the default system locations. If this is not possible, the solution is to change the SELinux context on non-standard directories, using default ones as a reference:

su -c "/usr/bin/chcon -R --reference=/etc/httpd/conf /path/to/new/conf"

or

su -c "/usr/bin/chcon -R --reference=/var/www/html /path/to/site/content"

Additional Information

Related Web Sites

Installed Documentation

  • /var/www/manual - requires httpd-manual rpm package