Architectures/ARM/Quality Assurance/Kernel Testing/Fedora 19

Fedora 19

kernel-3.10.0-0.rc3.git0.1.fc19 (scratch build)

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen	Disk Image			n/a	n/a
Pandaboard		SD
Trimslice Bare/Value Pro		SD					n/a
Trimslice Pro/H/H250		SATA					n/a
Highbank		SATA					n/a
Beagleboard XM							n/a
Beaglebone		MicroSD					n/a

kernel-3.9.2-301.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen	Disk Image	pass	pass	n/a	n/a	fail
Pandaboard	pwhalen	SD	pass		pass	pass	inprogress
Trimslice Bare/Value Pro	pwhalen	SD	pass	pass	pass	pass	n/a
Trimslice Pro/H/H250	jkastner	SATA	pass	pass	pass	pass	pass
Highbank	pwhalen	SATA	pass	pass	pass	n/a	n/a
Beagleboard XM							n/a
Beaglebone		MicroSD					n/a

kernel-3.9.1-301.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen	Disk Image			n/a	n/a
Pandaboard	pwhalen	SD	pass	pass	pass	pass	inprogress
Trimslice Bare/Value Pro	pwhalen	SD	pass	pass	pass	pass	n/a
Trimslice Pro/H/H250	jkastner	SATA	pass	pass	pass	pass	pass
Highbank	pwhalen	SATA	pass	pass	pass	n/a	n/a	Unstable, fpaste crashed system.
Beagleboard XM							n/a
Beaglebone		MicroSD					n/a

kernel-3.9.0-301.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen	Disk Image	pass	pass	pass	n/a	fail	Tested a9, a15.
Pandaboard	pwhalen	SD	warn	pass	pass	pass	fail	Booted using bootz, had to generate uInitrd manually. Tested on Pandaboard and Pandaboard ES
Trimslice Bare/Value Pro	pwhalen	SD	pass	pass	pass	pass	n/a
Trimslice Pro/H/H250		SATA					n/a
Highbank	pwhalen	SATA	warn	pass	pass	n/a	n/a	Initial Boot Took 3 boot attempts to come up.
Beagleboard XM							n/a
Beaglebone	pwhalen	MicroSD	fail				n/a	Internal error: Oops - undefined instruction: 0 [#1] SMP ARM

kernel-3.9.0-0.rc8.git0.1.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen	Disk Image	pass	pass	n/a	n/a	fail	Using new version of QEMU in F18-updates-testing -qemu-system-arm-1.2.2-11.fc18. Display not working, black screen when launched. Bugzilla Link
Pandaboard	pwhalen	SD	fail					Using bootz, did not find rootfs. Using uboot-panda-2013.04-1.fc19 (bootz support) . bootcmd
Trimslice Bare/Value Pro	pwhalen	SD	pass	pass	pass	pass	n/a
Trimslice Pro/H/H250	bconoboy	SATA	pass	pass	pass		n/a
Highbank	pwhalen	SATA	warn	pass	pass	n/a	n/a	Boots but will reliably crash the system using fpaste, when system is then reset OOPS. Bugzilla Link.
Beagleboard XM							n/a
Beaglebone	pwhalen	MicroSD	fail				n/a	OOPS

kernel-3.9.0-0.rc7.git3.1.fc19 (scratch build)

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen	Disk Image			n/a	n/a
Pandaboard	pwhalen	SD	pass	pass	pass	pass		Using uboot-panda-2013.04-1.fc19 (bootz support) . bootcmd When attempting to use DTB, nothing past starting the kernel. Confirmed on both the Panda and Panda-ES
Trimslice Bare/Value Pro	pwhalen	SD	pass	pass	pass	pass	n/a
Trimslice Pro/H/H250		SATA					n/a
Highbank	pwhalen	SATA	warn	pass	pass	n/a	n/a	Kernel did not boot when restarted. BUG: soft lockup when attempting to use fpaste. OOPS at boot.
Beagleboard XM							n/a
Beaglebone	pwhalen	MicroSD	fail				n/a	OOPS

kernel-3.9.0-0.rc7.git1.1.fc20 (scratch build)

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen	Disk Image			n/a	n/a
Pandaboard		SD
Trimslice Bare/Value Pro		SD					n/a
Trimslice Pro/H/H250		SATA					n/a
Highbank	pwhalen	SATA	fail				n/a	Starting the kernel.. Manual boot with dtb from kernel package. DTB from firmware same.
Beagleboard XM							n/a
Beaglebone	pwhalen	MicroSD	warn				n/a	Kernel boots after changing load address, but crashes during the boot

kernel-3.9.0-0.rc7.git0.2.fc19 (scratch build)

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen	Disk Image			n/a	n/a
Pandaboard	pwhalen	SD	warn	pass	pass	pass	inprogress	Data Abort with uImage from package, running mkimage changing the load/entry address allows the kernel to boot, without dtb. Using dtb nothing past 'Starting the kernel'.
Trimslice Bare/Value Pro	pwhalen	SD	pass	warn	pass	pass	n/a
Trimslice Pro/H/H250		SATA					n/a
Highbank	pwhalen	SATA	warn	pass	pass	n/a	n/a	backtrace at bootBUG: soft lockup. When rebooting after crash.
Beaglebone	pwhalen	MicroSD	warn				n/a	Kernel boots using dtb from kernel package, like the Pandaboard mkimage used to change the load/entry address. Crashes during the boot fpaste of boot.

kernel-3.9.0-0.rc6.git2.3.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen	Disk Image	pass	pass	n/a	n/a	inprogress	A9 - 'unwind: Unknown symbol address c0856604' when terminal left idle.
Pandaboard		SD
Trimslice Bare/Value Pro		SD					n/a
Trimslice Pro/H/H250		SATA					n/a
Highbank	pwhalen	SATA	fail				n/a	Tested with dtb from firmware and kernel package. Nothing output after 'Starting the kernel...'
Beagleboard XM							n/a

kernel-3.9.0-0.rc6.git2.1.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen	Disk Image	pass	pass	n/a	n/a	fail	A9, A15 working. qemu-system-arm-1.4.0-9.fc19.x86_64.
Pandaboard	pwhalen	SD	fail					Data Abort
Trimslice Bare/Value Pro	pwhalen	SD	fail				n/a	Uncompressing Linux... done, booting the kernel. Using firmware v2012.04-1.02 .v2012.04-1.01
Trimslice Pro/H/H250		SATA					n/a
Highbank	pwhalen	SATA	fail				n/a	Starting the kernel..
Beagleboard XM							n/a

kernel-3.9.0-0.rc6.git1.1.fc20

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen	Disk Image	pass	pass	n/a	n/a	fail	A9, A15 emulation working when using the appropriate dtb, with A15 it was possible to increase the ram to 2G, A9 - 'vexpress-a9: cannot model more than 1GB RAM'. Highbank emulation did not work - " Warning: nic xgmac.1 has no peer" with no further output. qemu-system-arm-1.4.0-9.fc19.x86_64
Pandaboard	dgilmore	SD	fail					Nothing past 'Starting the kernel' - using dtb from the kernel package.
Trimslice Bare/Value Pro	pwhalen	SD	warn	pass	pass	pass	n/a	Warm booted (3.8.6 > 3.9.0.rc6) with network, was able to ping another host initially, however repeated backtraces made system unusable. Reboot - nothing past 'Starting the kernel'. Issue with Gruboot and 3.9 kernels- limited dtb options - example).
Trimslice Pro/H/H250		SATA					n/a
Highbank	pwhalen	SATA	fail				n/a	Nothing past 'Starting the kernel' - using dtb from the kernel package and firmware.
Beagleboard XM							n/a

kernel-3.9.0-0.rc6.git0.1.fc20

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen	Disk Image	pass	pass	n/a	n/a	fail	Tested A9,A15
Pandaboard		SD
Trimslice Bare/Value Pro	pwhalen	SD	warn	fail	pass	pass	n/a	IP from DHCP server, but unable to ping gateway/any host. Pinging self caused BUG: scheduling while atomic: swapper/0/0/0x40000100
Trimslice Pro/H/H250		SATA					n/a
Highbank	pwhalen	SATA	warn	pass	pass	n/a	n/a	fpaste).
Beagleboard XM							n/a

kernel-3.9.0-0.rc5.git2.1.fc19

To test all machines were installed with a F18 rootfs, (where possible yum updated to Fedora 19), then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen	Disk Image	pass	pass	n/a	n/a	fail	A9, A15 emulation working when using the appropriate dtb, with A15 it was possible to increase the ram to 2G, A9 - 'vexpress-a9: cannot model more than 1GB RAM'. Highbank emulation did not work - " Warning: nic xgmac.1 has no peer" with no further output. qemu-system-arm-1.4.0-9.fc19.x86_64
Pandaboard	pwhalen	SD	fail					Nothing past "Starting the Kernel" also tested with dtb from the kernel package, result being the same.
Trimslice Bare/Value Pro	pwhalen	SD	fail				n/a	Warm booted to login, then crashed - fpaste
Trimslice Pro/H/H250		SATA					n/a
Highbank	pwhalen	SATA	fail				n/a	Nothing past "Starting the Kernel" also tested with dtb from the kernel package.
Beagleboard XM							n/a

kernel-3.9.0-0.rc4.git0.2.fc19

To test all machines were installed with a F18 rootfs, yum updated to Fedora 19, then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen	Disk Image			n/a	n/a
Pandaboard	pwhalen	SD	fail					Loading Kernel Image ... data abort
Trimslice Bare/Value Pro	pwhalen	SD	warn				n/a	Kernel booted to login, but crashed right after. fpaste. Subsequent booted attempts failed with nothing after - "Uncompressing Linux... done, booting the kernel".
Trimslice Pro/H/H250		SATA					n/a
Highbank	pwhalen	SATA	fail				n/a	Nothing after "Starting kernel ...". Also tested using DTB from kernel package, results were the same.
Beagleboard XM							n/a

kernel-3.9.0-0.rc4.git0.1.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen	Disk Image	pass	pass	n/a	n/a	Not Tested	Use f19 QEMU - f18 QEMU results in 'division by zero in the kernel'. Also tested and confirmed working with a15 dtb -v2p-ca15_ca7, confirmed in cpuinfo - CPU part - 0xc0f (Cortex A15).
Pandaboard	pwhalen	SD	fail					Install boot Data Abort, system resets.
Trimslice Bare/Value Pro		SD					n/a
Trimslice Pro/H/H250		SATA					n/a
Highbank	pwhalen	SATA	fail				n/a	Nothing further after 'Starting kernel ...' test with both dtb in firmware and dtb with kernel package.
Beagleboard XM							n/a

kernel-3.9.0-0.rc3.git1.4.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen	Disk Image	pass	pass	n/a	n/a
Pandaboard	pwhalen	SD	fail					During boot 'Loading Kernel Image ... data abort', System resets.
Trimslice Bare/Value Pro		SD					n/a
Trimslice Pro/H/H250		SATA					n/a
Highbank	pwhalen	SATA	fail				n/a	Nothing past 'Starting the kernel..' , tried with dtb from kernel package with the same result.
Beagleboard XM							n/a

kernel-3.9.0-0.rc1.git1.2.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen	Disk Image	fail		n/a	n/a		Division by zero in kernel
Pandaboard	pwhalen	SD	pass	pass	pass	pass	inprogress	Install. Dmesg snippet. Kernel will boot when warm booted from a 3.8 kernel (3.8 upgrade to 3.9, reboot works). When the system is then rebooted again (or shutdown and booted), it stops at 'Starting the Kernel..' . This was confirmed on both a Panda and Panda ES.
Trimslice Bare/Value Pro		SD					n/a
Trimslice Pro/H/H250		SATA					n/a
Highbank	dmarlin	SATA	fail				n/a	Nothing past "Starting the kernel..", also boot attempted with dtb from kernel package with the same result.
Beagleboard XM							n/a

kernel-3.9.0-0.rc1.git0.1.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen	Disk Image	fail		n/a	n/a		Fpaste qemu-system-arm-1.2.2-6.fc18, using DTB.
Pandaboard		SD
Trimslice Bare/Value Pro		SD					n/a
Trimslice Pro/H/H250		SATA					n/a
Highbank							n/a
Beagleboard XM							n/a

kernel-3.8.0-0.rc7.git0.2.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen	Disk Image	fail		n/a	n/a		Did not boot (with or without dtb)
Pandaboard		SD
Trimslice Bare/Value Pro		SD					n/a
Trimslice Pro/H/H250		SATA					n/a
Highbank							n/a
Beagleboard XM							n/a

kernel-3.8.0-0.rc5.git2.1.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen	Disk Image	fail		n/a	n/a	n/a
Versatile Express+XFCE (Qemu)					n/a	n/a
Pandaboard	pwhalen	SD	pass	pass	pass	pass	fail	http://fpaste.org/sWoa/
Trimslice Bare/Value Pro	pwhalen	SD	fail				n/a	Install
Trimslice Pro/H/H250		SATA					n/a
Highbank							n/a
Beagleboard XM							n/a
Kirkwood (sheevaplug, dreamplug, guruplug, etc)							n/a

kernel-3.8.0-0.rc4.git1.1.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen	Disk image	fail		n/a	n/a	n/a	Using dtb added to the boot script, fpaste of boot
Versatile Express+XFCE (Qemu)					n/a	n/a
Pandaboard		SD					n/a
Pandaboard+XFCE
Trimslice Bare/Value Pro	pwhalen	SD	fail				n/a	Tested using U-Boot 2012.04.01-1.01, with dtb, fpaste
Trimslice Pro/H/H250		SATA					n/a
Highbank							n/a
Beagleboard XM							n/a
Kirkwood (sheevaplug, dreamplug, guruplug, etc)							n/a
Efika SmartTop iMX							n/a

kernel-3.8.0-0.rc2.git3.2.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen		fail		n/a	n/a	n/a	fpaste
Versatile Express+XFCE (Qemu)					n/a	n/a
Pandaboard	pwhalen	SD	fail				n/a	fpaste
Pandaboard+XFCE
Trimslice Bare/Value Pro		SD					n/a
Trimslice Pro/H/H250		SATA					n/a
Highbank							n/a
Beagleboard XM							n/a
Kirkwood (sheevaplug, dreamplug, guruplug, etc)							n/a
Efika SmartTop iMX							n/a

kernel-3.7.0-4.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen		fail		n/a	n/a	n/a	fpaste
Versatile Express+XFCE (Qemu)					n/a	n/a
Pandaboard		SD					n/a
Pandaboard+XFCE
Trimslice Bare/Value Pro		SD					n/a
Trimslice Pro/H/H250		SATA					n/a
Highbank							n/a
Beagleboard XM							n/a
Kirkwood (sheevaplug, dreamplug, guruplug, etc)							n/a
Efika SmartTop iMX							n/a

kernel-3.7.0-0.rc3.git2.1.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Storage	Display	Final Notes
Versatile Express (Qemu)	pwhalen		warn	pass	pass				selinux needs to be in permissive mode, dtb required.
Versatile Express+XFCE (Qemu)
Pandaboard	pwhalen	SD	warn	pass	pass	pass	pass	na	selinux needs to be in permissive mode.
Pandaboard+XFCE	pwhalen	SD	warn	pass	pass	pass	pass	pass	selinux needs to be in permissive mode.
Trimslice Bare/Value Pro		SD						n/a
Trimslice Pro/H/H250		SATA						n/a
Highbank	pwhalen	fail						n/a	[fpaste]
Beagleboard XM
Kirkwood (sheevaplug, dreamplug, guruplug, etc)
Efika SmartTop iMX								n/a

?

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware	Who	media	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	pwhalen	Disk Image			n/a	n/a
Pandaboard		SD
Trimslice Bare/Value Pro		SD					n/a
Trimslice Pro/H/H250		SATA					n/a
Highbank		SATA					n/a
Beagleboard XM							n/a
Beaglebone		MicroSD					n/a