| Line 7: | Line 7: | ||
|| Versatile Express (Qemu) ||[[user|pwhalen]] ||Disk Image|| || ||n/a ||n/a || || | || Versatile Express (Qemu) ||[[user|pwhalen]] ||Disk Image|| || ||n/a ||n/a || || | ||
|- | |- | ||
|| Pandaboard || || SD || | || Pandaboard ||[[user|pwhalen]] || SD || {{result|pass}} || {{result|pass}} || {{result|pass}} || {{result|pass}} || || Tested on Pandaboard and ES. | ||
|- | |- | ||
|| Trimslice Bare/Value Pro || ||SD || || || || ||n/a|| | || Trimslice Bare/Value Pro || ||SD || || || || ||n/a|| | ||
Revision as of 15:08, 3 June 2013
Fedora 19
kernel-3.10.0-0.rc3.git0.1.fc19 (scratch build)
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | Disk Image | n/a | n/a | ||||
| Pandaboard | pwhalen | SD |  |
|
|
|
Tested on Pandaboard and ES. | |
| Trimslice Bare/Value Pro | SD | n/a | ||||||
| Trimslice Pro/H/H250 | SATA | n/a | ||||||
| Highbank | SATA | n/a | ||||||
| Beagleboard XM | n/a | |||||||
| Beaglebone | MicroSD | n/a |
kernel-3.9.2-301.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | Disk Image | |
|
n/a | n/a |  |
|
| Pandaboard | pwhalen | SD | |
|
|
 |
||
| Trimslice Bare/Value Pro | pwhalen | SD | |
|
|
|
n/a | |
| Trimslice Pro/H/H250 | jkastner | SATA | |
|
|
|
|
|
| Highbank | pwhalen | SATA | |
|
|
n/a | n/a | |
| Beagleboard XM | n/a | |||||||
| Beaglebone | MicroSD | n/a |
kernel-3.9.1-301.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | Disk Image | n/a | n/a | ||||
| Pandaboard | pwhalen | SD | |
|
|
|
|
|
| Trimslice Bare/Value Pro | pwhalen | SD | |
|
|
|
n/a | |
| Trimslice Pro/H/H250 | jkastner | SATA | |
|
|
|
|
|
| Highbank | pwhalen | SATA | |
|
|
n/a | n/a | Unstable, fpaste crashed system. |
| Beagleboard XM | n/a | |||||||
| Beaglebone | MicroSD | n/a |
kernel-3.9.0-301.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | Disk Image | |
|
|
n/a | |
Tested a9, a15. |
| Pandaboard | pwhalen | SD |  |
|
|
|
|
Booted using bootz, had to generate uInitrd manually. Tested on Pandaboard and Pandaboard ES |
| Trimslice Bare/Value Pro | pwhalen | SD | |
|
|
|
n/a | |
| Trimslice Pro/H/H250 | SATA | n/a | ||||||
| Highbank | pwhalen | SATA | |
|
|
n/a | n/a | Initial Boot Took 3 boot attempts to come up. |
| Beagleboard XM | n/a | |||||||
| Beaglebone | pwhalen | MicroSD | |
n/a | Internal error: Oops - undefined instruction: 0 [#1] SMP ARM |
kernel-3.9.0-0.rc8.git0.1.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | Disk Image | |
|
n/a | n/a | |
Using new version of QEMU in F18-updates-testing -qemu-system-arm-1.2.2-11.fc18. Display not working, black screen when launched. Bugzilla Link |
| Pandaboard | pwhalen | SD | |
Using bootz, did not find rootfs. Using uboot-panda-2013.04-1.fc19 (bootz support) . bootcmd | ||||
| Trimslice Bare/Value Pro | pwhalen | SD | |
|
|
|
n/a | |
| Trimslice Pro/H/H250 | bconoboy | SATA | |
|
|
n/a | ||
| Highbank | pwhalen | SATA | |
|
|
n/a | n/a | Boots but will reliably crash the system using fpaste, when system is then reset OOPS. Bugzilla Link. |
| Beagleboard XM | n/a | |||||||
| Beaglebone | pwhalen | MicroSD | |
n/a | OOPS |
kernel-3.9.0-0.rc7.git3.1.fc19 (scratch build)
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | Disk Image | n/a | n/a | ||||
| Pandaboard | pwhalen | SD | |
|
|
|
Using uboot-panda-2013.04-1.fc19 (bootz support) . bootcmd When attempting to use DTB, nothing past starting the kernel. Confirmed on both the Panda and Panda-ES | |
| Trimslice Bare/Value Pro | pwhalen | SD | |
|
|
|
n/a | |
| Trimslice Pro/H/H250 | SATA | n/a | ||||||
| Highbank | pwhalen | SATA | |
|
|
n/a | n/a | Kernel did not boot when restarted. BUG: soft lockup when attempting to use fpaste. OOPS at boot. |
| Beagleboard XM | n/a | |||||||
| Beaglebone | pwhalen | MicroSD | |
n/a | OOPS |
kernel-3.9.0-0.rc7.git1.1.fc20 (scratch build)
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | Disk Image | n/a | n/a | ||||
| Pandaboard | SD | |||||||
| Trimslice Bare/Value Pro | SD | n/a | ||||||
| Trimslice Pro/H/H250 | SATA | n/a | ||||||
| Highbank | pwhalen | SATA | |
n/a | Starting the kernel.. Manual boot with dtb from kernel package. DTB from firmware same. | |||
| Beagleboard XM | n/a | |||||||
| Beaglebone | pwhalen | MicroSD | |
n/a | Kernel boots after changing load address, but crashes during the boot |
kernel-3.9.0-0.rc7.git0.2.fc19 (scratch build)
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | Disk Image | n/a | n/a | ||||
| Pandaboard | pwhalen | SD | |
|
|
|
|
Data Abort with uImage from package, running mkimage changing the load/entry address allows the kernel to boot, without dtb. Using dtb nothing past 'Starting the kernel'. |
| Trimslice Bare/Value Pro | pwhalen | SD | |
|
|
|
n/a | |
| Trimslice Pro/H/H250 | SATA | n/a | ||||||
| Highbank | pwhalen | SATA | |
|
|
n/a | n/a | backtrace at bootBUG: soft lockup. When rebooting after crash. |
| Beaglebone | pwhalen | MicroSD | |
n/a | Kernel boots using dtb from kernel package, like the Pandaboard mkimage used to change the load/entry address. Crashes during the boot fpaste of boot. |
kernel-3.9.0-0.rc6.git2.3.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | Disk Image | |
|
n/a | n/a | |
A9 - 'unwind: Unknown symbol address c0856604' when terminal left idle. |
| Pandaboard | SD | |||||||
| Trimslice Bare/Value Pro | SD | n/a | ||||||
| Trimslice Pro/H/H250 | SATA | n/a | ||||||
| Highbank | pwhalen | SATA | |
n/a | Tested with dtb from firmware and kernel package. Nothing output after 'Starting the kernel...' | |||
| Beagleboard XM | n/a |
kernel-3.9.0-0.rc6.git2.1.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | Disk Image | |
|
n/a | n/a | |
A9, A15 working. qemu-system-arm-1.4.0-9.fc19.x86_64. |
| Pandaboard | pwhalen | SD | |
Data Abort | ||||
| Trimslice Bare/Value Pro | pwhalen | SD | |
n/a | Uncompressing Linux... done, booting the kernel. Using firmware v2012.04-1.02 .v2012.04-1.01 | |||
| Trimslice Pro/H/H250 | SATA | n/a | ||||||
| Highbank | pwhalen | SATA | |
n/a | Starting the kernel.. | |||
| Beagleboard XM | n/a |
kernel-3.9.0-0.rc6.git1.1.fc20
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | Disk Image | |
|
n/a | n/a | |
A9, A15 emulation working when using the appropriate dtb, with A15 it was possible to increase the ram to 2G, A9 - 'vexpress-a9: cannot model more than 1GB RAM'. Highbank emulation did not work - " Warning: nic xgmac.1 has no peer" with no further output. qemu-system-arm-1.4.0-9.fc19.x86_64 |
| Pandaboard | dgilmore | SD | |
Nothing past 'Starting the kernel' - using dtb from the kernel package. | ||||
| Trimslice Bare/Value Pro | pwhalen | SD | |
|
|
|
n/a | Warm booted (3.8.6 > 3.9.0.rc6) with network, was able to ping another host initially, however repeated backtraces made system unusable. Reboot - nothing past 'Starting the kernel'. Issue with Gruboot and 3.9 kernels- limited dtb options - example). |
| Trimslice Pro/H/H250 | SATA | n/a | ||||||
| Highbank | pwhalen | SATA | |
n/a | Nothing past 'Starting the kernel' - using dtb from the kernel package and firmware. | |||
| Beagleboard XM | n/a |
kernel-3.9.0-0.rc6.git0.1.fc20
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | Disk Image | |
|
n/a | n/a | |
Tested A9,A15 |
| Pandaboard | SD | |||||||
| Trimslice Bare/Value Pro | pwhalen | SD | |
|
|
|
n/a | IP from DHCP server, but unable to ping gateway/any host. Pinging self caused BUG: scheduling while atomic: swapper/0/0/0x40000100 |
| Trimslice Pro/H/H250 | SATA | n/a | ||||||
| Highbank | pwhalen | SATA | |
|
|
n/a | n/a | fpaste). |
| Beagleboard XM | n/a |
kernel-3.9.0-0.rc5.git2.1.fc19
To test all machines were installed with a F18 rootfs, (where possible yum updated to Fedora 19), then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | Disk Image | |
|
n/a | n/a | |
A9, A15 emulation working when using the appropriate dtb, with A15 it was possible to increase the ram to 2G, A9 - 'vexpress-a9: cannot model more than 1GB RAM'. Highbank emulation did not work - " Warning: nic xgmac.1 has no peer" with no further output. qemu-system-arm-1.4.0-9.fc19.x86_64 |
| Pandaboard | pwhalen | SD | |
Nothing past "Starting the Kernel" also tested with dtb from the kernel package, result being the same. | ||||
| Trimslice Bare/Value Pro | pwhalen | SD | |
n/a | Warm booted to login, then crashed - fpaste | |||
| Trimslice Pro/H/H250 | SATA | n/a | ||||||
| Highbank | pwhalen | SATA | |
n/a | Nothing past "Starting the Kernel" also tested with dtb from the kernel package. | |||
| Beagleboard XM | n/a |
kernel-3.9.0-0.rc4.git0.2.fc19
To test all machines were installed with a F18 rootfs, yum updated to Fedora 19, then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | Disk Image | n/a | n/a | ||||
| Pandaboard | pwhalen | SD | |
Loading Kernel Image ... data abort | ||||
| Trimslice Bare/Value Pro | pwhalen | SD | |
n/a | Kernel booted to login, but crashed right after. fpaste. Subsequent booted attempts failed with nothing after - "Uncompressing Linux... done, booting the kernel". | |||
| Trimslice Pro/H/H250 | SATA | n/a | ||||||
| Highbank | pwhalen | SATA | |
n/a | Nothing after "Starting kernel ...". Also tested using DTB from kernel package, results were the same. | |||
| Beagleboard XM | n/a |
kernel-3.9.0-0.rc4.git0.1.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | Disk Image | |
|
n/a | n/a | Not Tested | Use f19 QEMU - f18 QEMU results in 'division by zero in the kernel'. Also tested and confirmed working with a15 dtb -v2p-ca15_ca7, confirmed in cpuinfo - CPU part - 0xc0f (Cortex A15). |
| Pandaboard | pwhalen | SD | |
Install boot Data Abort, system resets. | ||||
| Trimslice Bare/Value Pro | SD | n/a | ||||||
| Trimslice Pro/H/H250 | SATA | n/a | ||||||
| Highbank | pwhalen | SATA | |
n/a | Nothing further after 'Starting kernel ...' test with both dtb in firmware and dtb with kernel package. | |||
| Beagleboard XM | n/a |
kernel-3.9.0-0.rc3.git1.4.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | Disk Image | |
|
n/a | n/a | ||
| Pandaboard | pwhalen | SD | |
During boot 'Loading Kernel Image ... data abort', System resets. | ||||
| Trimslice Bare/Value Pro | SD | n/a | ||||||
| Trimslice Pro/H/H250 | SATA | n/a | ||||||
| Highbank | pwhalen | SATA | |
n/a | Nothing past 'Starting the kernel..' , tried with dtb from kernel package with the same result. | |||
| Beagleboard XM | n/a |
kernel-3.9.0-0.rc1.git1.2.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | Disk Image | |
n/a | n/a | Division by zero in kernel | ||
| Pandaboard | pwhalen | SD | |
|
|
|
|
Install. Dmesg snippet. Kernel will boot when warm booted from a 3.8 kernel (3.8 upgrade to 3.9, reboot works). When the system is then rebooted again (or shutdown and booted), it stops at 'Starting the Kernel..' . This was confirmed on both a Panda and Panda ES. |
| Trimslice Bare/Value Pro | SD | n/a | ||||||
| Trimslice Pro/H/H250 | SATA | n/a | ||||||
| Highbank | dmarlin | SATA | |
n/a | Nothing past "Starting the kernel..", also boot attempted with dtb from kernel package with the same result. | |||
| Beagleboard XM | n/a |
kernel-3.9.0-0.rc1.git0.1.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | Disk Image | |
n/a | n/a | Fpaste qemu-system-arm-1.2.2-6.fc18, using DTB. | ||
| Pandaboard | SD | |||||||
| Trimslice Bare/Value Pro | SD | n/a | ||||||
| Trimslice Pro/H/H250 | SATA | n/a | ||||||
| Highbank | n/a | |||||||
| Beagleboard XM | n/a |
kernel-3.8.0-0.rc7.git0.2.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | Disk Image | |
n/a | n/a | Did not boot (with or without dtb) | ||
| Pandaboard | SD | |||||||
| Trimslice Bare/Value Pro | SD | n/a | ||||||
| Trimslice Pro/H/H250 | SATA | n/a | ||||||
| Highbank | n/a | |||||||
| Beagleboard XM | n/a |
kernel-3.8.0-0.rc5.git2.1.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | Disk Image | |
n/a | n/a | n/a | ||
| Versatile Express+XFCE (Qemu) | n/a | n/a | ||||||
| Pandaboard | pwhalen | SD | |
|
|
|
|
http://fpaste.org/sWoa/ |
| Trimslice Bare/Value Pro | pwhalen | SD | |
n/a | Install | |||
| Trimslice Pro/H/H250 | SATA | n/a | ||||||
| Highbank | n/a | |||||||
| Beagleboard XM | n/a | |||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | n/a |
kernel-3.8.0-0.rc4.git1.1.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | Disk image | |
n/a | n/a | n/a | Using dtb added to the boot script, fpaste of boot | |
| Versatile Express+XFCE (Qemu) | n/a | n/a | ||||||
| Pandaboard | SD | n/a | ||||||
| Pandaboard+XFCE | ||||||||
| Trimslice Bare/Value Pro | pwhalen | SD | |
n/a | Tested using U-Boot 2012.04.01-1.01, with dtb, fpaste | |||
| Trimslice Pro/H/H250 | SATA | n/a | ||||||
| Highbank | n/a | |||||||
| Beagleboard XM | n/a | |||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | n/a | |||||||
| Efika SmartTop iMX | n/a |
kernel-3.8.0-0.rc2.git3.2.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | |
n/a | n/a | n/a | fpaste | ||
| Versatile Express+XFCE (Qemu) | n/a | n/a | ||||||
| Pandaboard | pwhalen | SD | |
n/a | fpaste | |||
| Pandaboard+XFCE | ||||||||
| Trimslice Bare/Value Pro | SD | n/a | ||||||
| Trimslice Pro/H/H250 | SATA | n/a | ||||||
| Highbank | n/a | |||||||
| Beagleboard XM | n/a | |||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | n/a | |||||||
| Efika SmartTop iMX | n/a |
kernel-3.7.0-4.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | |
n/a | n/a | n/a | fpaste | ||
| Versatile Express+XFCE (Qemu) | n/a | n/a | ||||||
| Pandaboard | SD | n/a | ||||||
| Pandaboard+XFCE | ||||||||
| Trimslice Bare/Value Pro | SD | n/a | ||||||
| Trimslice Pro/H/H250 | SATA | n/a | ||||||
| Highbank | n/a | |||||||
| Beagleboard XM | n/a | |||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | n/a | |||||||
| Efika SmartTop iMX | n/a |
kernel-3.7.0-0.rc3.git2.1.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Storage | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | |
|
|
selinux needs to be in permissive mode, dtb required. | ||||
| Versatile Express+XFCE (Qemu) | |||||||||
| Pandaboard | pwhalen | SD | |
|
|
|
|
na | selinux needs to be in permissive mode. |
| Pandaboard+XFCE | pwhalen | SD | |
|
|
|
|
|
selinux needs to be in permissive mode. |
| Trimslice Bare/Value Pro | SD | n/a | |||||||
| Trimslice Pro/H/H250 | SATA | n/a | |||||||
| Highbank | pwhalen | |
n/a | [fpaste] | |||||
| Beagleboard XM | |||||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | |||||||||
| Efika SmartTop iMX | n/a |
?
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | Disk Image | n/a | n/a | ||||
| Pandaboard | SD | |||||||
| Trimslice Bare/Value Pro | SD | n/a | ||||||
| Trimslice Pro/H/H250 | SATA | n/a | ||||||
| Highbank | SATA | n/a | ||||||
| Beagleboard XM | n/a | |||||||
| Beaglebone | MicroSD | n/a |