LimeSDR

LimeSDR is an USB SDR device with full OpenSource software support. It has Lime Microsystems LMS7002M RF-transreceiver and Altera Cyclone IV EP4CE40F23 FPGA on board. It uses SoapySDR hardware abstration library for SDR-software.

Main features:

• RD frequency range: 100kHz-3.8GHz
• RF bandwidth: 61.44MHz
• Sample depth: 12 bits
• Sample rate: 61.44MSPS
• Host interface: USB 3.0

Hardware

$ lsusb
Bus 002 Device 087: ID 1d50:6108 OpenMoko, Inc. Myriad-RF LimeSDR

device appears as OpenMoko.

gqrx

Gqrx support was announced at 2016-05-01 by Alexandru Csete. It needs to be run as root permissions.

Configuration settings for I/O device::

• Device string: soapy=0,driver=lime
• manually set sample rate and bandwidth:
  • sample rate:
  • bandwidth:
• Leave “LNB LO” at 0 unless you actually have an LNB in front of your device.

Sample rates that work: 1.25, 2.5, 5, 10 Msps. Bandwidths: 1.5, 4, 10 MHz Other sample rates will also work For frequencies < 30 MHz, use bandwidth 60 MHz (or 100 ) For frequencies > 30 MHz, we can use 0 meaning auto. Other bandwidth values should also work, but some of them crash.

Errors

• SoapySDR::Device::make() no match
• [ERROR] SetFrequencySXR(30 MHz) - cannot deliver frequency

See also

• SDR

External links

• limemicro.com Lime Microsystems Ltd
• myriadrf.org
  • myriadrf.org - LimeSuite
  • myriadrf.org - LimeSuite Wiki
  • myriadrf.org - LMS7002m control driver
• https://www.crowdsupply.com/lime-micro/limesdr