Test Day:2011-02-22 Nouveau: Difference between revisions

Revision as of 17:39, 22 February 2011

In other languages: English (en) русский (ru) [edit]

DATE	TIME	WHERE
Tue Feb 22, 2011	ALL DAY	#fedora-test-day)

Arriving after the date above?
If you come to this page after the test day is completed, your testing of Nouveau is still valuable, and you can use the information on this page to test Nouveau with your graphics card and provide feedback. If you are visiting after the release of Fedora 15, please wait for the next Nouveau test day.

What to test?

Today's Fedora Test Day will focus on the Nouveau graphics driver for NVIDIA graphics cards.

Who's available

The following cast of characters will be available for testing, workarounds, bug fixes, and general discussion.

Development - Ben Skeggs (IRC: darktama)
Quality Assurance - Adam Williamson (IRC: adamw)

What's needed to test

An NVIDIA graphics adapter. To confirm whether you have supporting hardware, run the following command:

/sbin/lspci -d 10de: | grep -iq VGA && echo "Join Nouveau Fedora Test Day" || echo "No nVidia graphics hardware found."

An updated Fedora 42 pre-release, or the special live image (see below)
Your hardware profile uploaded to Smolt according to these instructions

How to test?

Update your machine

If you're running Fedora 42, make sure you have all the current updates for it installed, using the update manager. Or you can use a live image:

Live image

Optionally, you may download a non-destructive Fedora 42 live image for your architecture. Tips on using a live image are available at FedoraLiveCD.

Architecture	SHA256SUM
i686	4553b73f8fab46fbb85384974decc7f9595e5c7af6df76e303cef5e62a76e07f
x86_64	e59d1886f7b766011b89d88369d09a4dd46bd7ba8a25664e9de0430d0f8725d7

Test

Follow each of these test cases:

QA:Testcase_nouveau_basic
QA:Testcase_nouveau_gnome3 ALL GeForce cards should support Shell: if you get fallback mode, please report the test as a warn and file a bug
QA:Testcase_nouveau_dpms
QA:Testcase_nouveau_xv
QA:Testcase_nouveau_rotate
QA:Testcase_nouveau_restartx
QA:Testcase_nouveau_rendercheck (can take some time to complete, from 10 minutes to an hour or two)
QA:Testcase_nouveau_glx
QA:Testcase_nouveau_fastuserswitch
QA:Testcase_nouveau_vt
QA:Testcase_nouveau_suspend

Multihead test case:

QA:Testcase_nouveau_multihead

You will need two or more monitors to perform the multihead test.

Optional extended OpenGL test cases (some of these will require you to at least move around in games):

These will provide more detailed testing of 3D functionality. Please file bugs for any failures you find if running these tests.

Report your results

If you have problems with any of the tests, report a bug to Bugzilla usually for the component xorg-x11-drv-nouveau. If you are unsure about exactly how to file the report, just ask on IRC and we will help you. Follow the instructions on this page to ensure you include sufficient information in the report. Once you have completed the tests, add your results to the Results table below, following the example results from Sample user as a template. The first column should be your name with a link to your User page in the Wiki if you have one, and the second should be a link to your Smolt hardware profile (see above for a link with instructions on submitting your hardware profile to Smolt). For each test case, use the result template to enter your result, as shown in the example result line. If you could not perform one test (for example, you cannot perform the more advanced tests because the basic one fails, or you cannot perform the multihead test as you have only one display), enter the word N/A. In the comments column, you can enter the model name and PCI device ID (vendor ID is usually 10DE) of your card, if you know it - you can usually find this information in the output of the command lspci -nn.

Results

User	Smolt Profile	Basic test	GNOME 3 start	DPMS	XVideo	Rotation	X restart	Rendercheck	GLX	User switch	VT switch	Suspend	Multihead	Comments
Example user	HW	pass	pass	pass	pass	pass	pass	pass	pass	pass	N/A	fail ^[1]	warn ^[2]	↑ RHBZ #123456 ↑ RHBZ #234567
User:pfps	HW	pass ^[1]	fail ^[2] ^[3]	none	none	none	none	none	none	none	none	none	none	↑ Some artifacts on screen, but nothing more than usual for pre-production stuff ↑ RHBZ #671294 ↑ This is with a 686 kernel on a 64bit machine
red	HW	pass	warn ^[1]	pass	fail ^[2]	warn ^[3]	pass	pass ^[4]	pass	pass	pass	warn ^[5]	N/A	↑ RHBZ #679326 ↑ RHBZ #679319 ↑ Setting back to normal first ended in weird rendering output but second try was successful ↑ rendercheck ↑ Suspend triggers shutdown dialog instead (LiveCD).
Stéphane Démurget	HW	none	none	none	none	none	none	none	none	none	none	none	none
denwerko	HW	warn ^[1]	warn ^[2]	pass	pass	pass	pass	pass ^[3]	pass	pass	warn ^[4]	fail ^[5]	none	↑ Xorg freezes after while being idle, only cursor moves ↑ RHBZ #679326 ↑ File:Denwerko-renderchecklog.tar.gz ↑ X is on vt7 instead vt1 ↑ suspend doesn't work (liveCD)
rnovacek	HW	warn ^[1]	warn ^[2] ^[3]	pass	pass	fail ^[4]	none	none	warn ^[5]	pass	warn ^[6]	none	pass	↑ wrong resolution ↑ RHBZ #679326 ↑ effects very slow ↑ Screen is disordered and not rotated ↑ glxgears isn't smooth during effect ↑ X is on vt7 instead vt1
mhlavink	HW	fail ^[1] ^[2]	pass	pass	pass	pass	pass	pass File:F15 nouveau mhlavink renderchecklog.gz	pass	warn ^[3]	fail ^[4] ^[5]	warn ^[6]	pass	↑ RHBZ #679330 ↑ artifacts ↑ gnome user switching does not work with kdm ↑ RHBZ #679331 ↑ windows decorations missing ↑ suspend in gnome brings only shutdown dialog
vbenes	HW	pass	pass	pass	pass	tbd	tbd	tbd	tbd	tbd	tbd	tbd	tbd
madko	HW	pass	pass	pass	pass	pass	pass	pass File:Madko Renderchecklog.gz	pass	pass ^[1]	pass	fail ^[2]	pass	↑ Little artefacts in gdm background wallpaper ↑ Does suspend work with liveCD/USB?
zbyszek	HW	warn ^[1]^[2]	pass	pass	pass	pass	pass	pass ^[3]	pass	pass	pass	warn ^[4]	pass	↑ Some very minor display glitches, looks like some parts of the screen are not updated. ↑ I'm getting some hang-ups, which _look_ like graphics problems, because the machine is totally unresponsive but the X cursor still moves. Not repeatable enough to write a bug-report :(. ↑ rendercheck ↑ suspend in gnome brings only shutdown dialog
sgallagh	HW	fail ^[1]	pass	pass	pass	pass	pass	pass ^[2]	warn ^[3]	warn ^[4]	pass	fail ^[5]	fail ^[6]	↑ Intermittent graphical errors at the bottom of the screen (the notification area) ↑ File:Sgallagh-renderchecklog.gz ↑ Had a non-reproducible crash trying to start Extreme Tux Racer the first time. ↑ Created a new user (switchuser) with 'adduser switchuser' and 'passwd switchuser'. When I went to the login dialog to switch users, the switchuser login name was not blank. However, all switch-related functionality worked ↑ Suspend from Gnome only resulted in a full shutdown. Using the 'suspend' command-line option hung. This is with the live image. ↑ It properly detected a new monitor, but did not return to single head mode when that monitor was disconnected. This was on the VGA port
pfrields	HW
Masami	HW	pass	pass	pass	pass	pass	pass	none	pass	pass	pass	pass	pass
fmos	HW	pass	pass ^[1]	pass	fail ^[2]	pass	warn ^[3]	pass ^[4]	none	none	pass	fail ^[5]	none	↑ /OT wow, nice! thank you all! OT/ ↑ Totem crashes after choosing File-Open ↑ Xorg segfaulted on exit File:Fmos-Restartx Xorg 0.log.gz ↑ File:Fmos.renderchecklog.gz ↑ FreeDesktop Bugzilla – Bug 34429
Elbin	HW	fail ^[1]	pass	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	nForce2 on-board video 10de:01f0 ↑ RHBZ #679366
Tethys	HW	fail ^[1]	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	↑ RHBZ #679432
Twaugh	HW	pass	pass	pass	pass	pass	fail ^[1] ^[2]	none	warn ^[3]	pass	pass	none	none	↑ RHBZ #679429 ↑ X segfaulted, bug report to come ↑ X froze once after deactivating overview mode but couldn't reproduce it
Vlads	HW	pass	pass	pass	pass	fail ^[1]	pass	pass ^[2]	pass	none	pass	warn ^[3]	N/A	↑ Image corruption appeared after screen rotation ↑ rendercheck ↑ suspend in gnome brings only shutdown dialog
domk	HW	pass	fail	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	Geforce 7025 10de:053e
jdashton	HW	pass	fail ^[1] pass ^[2]	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	ThinkPad T61 (NVidia) using x86_64 Live USB ↑ System gets stuck in a loop and cannot start either desktop ↑ Removed external monitor and was able to log in using only laptop screen
Marek Zdunek	HW	pass	pass	pass	pass	pass	inprogress	pass ^[1]	pass	inprogress	pass	fail ^[2]	N/A	↑ rendercheck ↑ No suspend on LiveCD x86_64
Göran Uddeborg	HW	pass	pass	none	none	none	none	none	none	none	none	none	none
m0nhawk	HW	pass	pass	pass	N/A	fail ^[1]	N/A	pass ^[2]	pass	N/A	pass	warn ^[3]	N/A	↑ Image slicing appeared in 90 Degree rotation (clock and anti-clock). No rotation appeared in 180 Degree (actually it looks-like no rotation, only mouse pointer rotates). ↑ rendercheck ↑ No suspend available.
Horst H. von Brand	HW	pass	warn ^[1]	pass	pass	pass	pass ^[2]	N/A	pass	N/A	pass	N/A^[3]	pass	↑ Starts in legacy, after ctrl-alt-BS it goes to Gnome shell ↑ In the console a 80x24 (looks like it, anyway) white rectangle shows (black on white), after logging in and clearing the tty it is white on black. startx gives legacy Gnome, after logout + login it is Gnome shell ↑ The livecd doesn't have suspend. Starting suspend gives shutdown, cancelling that and trying again gave a hang (not even caps-lock LED). But CD was still working.
pengela	HW	pass	warn	pass	pass	pass	fail	pass ^[1]	none	none	pass	fail	pass	↑ 45 of 46 tests passed
MahMahoritos	HW	pass	pass	pass	pass	pass	pass	pass	pass	pass ^[1]	pass	fail ^[2]	pass	↑ Picture crashes into mosaic in multihead configuration. But it's OK after reconection of second monitor (HDMI LCD TV) ↑ No suspend available.
[M. Piotrowski]	HW	pass	pass	pass	pass	pass ^[1]	pass	pass ^[2]	pass	pass	pass ^[3]	N/A	N/A	LeadTek WinFast PX 8600 GTS (nVidia Corporation G84 [GeForce 8600 GTS] [10de:0400]) ↑ Gnome shell restarted Xs once, when I tried to revert back from rotated screen. Subsequent rotation test were without problems. ↑ 46 of 46 tests passed ↑ After reverting back from VT to Gnome, text on a gnome-console console disappeared. It reappeared when I clicked on the gnome-console window.
User	Smolt Profile	Basic test	GNOME 3 start	DPMS	XVideo	Rotation	X restart	Rendercheck	GLX	User switch	VT switch	Suspend	Multihead	Comments

[bz123456-1] RHBZ #123456

[bz234567-2] RHBZ #234567

[3] Some artifacts on screen, but nothing more than usual for pre-production stuff

[bz671294-4] RHBZ #671294

[5] This is with a 686 kernel on a 64bit machine

[bz679326-6] RHBZ #679326

[bz679319-7] RHBZ #679319

[8] Setting back to normal first ended in weird rendering output but second try was successful

[9] rendercheck

[10] Suspend triggers shutdown dialog instead (LiveCD).

[11] Xorg freezes after while being idle, only cursor moves

[bz679326-12] RHBZ #679326

[13] File:Denwerko-renderchecklog.tar.gz

[14] X is on vt7 instead vt1

[15] suspend doesn't work (liveCD)

[16] wrong resolution

[bz679326-17] RHBZ #679326

[18] ts very slow

[19] Screen is disordered and not rotated

[20] xgears isn't smooth during effect

[21] X is on vt7 instead vt1

[bz679330-22] RHBZ #679330

[23] rtifacts

[24] user switching does not work with kdm

[bz679331-25] RHBZ #679331

[26] windows decorations missing

[27] suspend in gnome brings only shutdown dialog

[28] Little artefacts in gdm background wallpaper

[29] Does suspend work with liveCD/USB?

[30] Some very minor display glitches, looks like some parts of the screen are not updated.

[31] I'm getting some hang-ups, which _look_ like graphics problems, because the machine is totally unresponsive but the X cursor still moves. Not repeatable enough to write a bug-report :(.

[32] rendercheck

[33] suspend in gnome brings only shutdown dialog

[34] Intermittent graphical errors at the bottom of the screen (the notification area)

[35] File:Sgallagh-renderchecklog.gz

[36] Had a non-reproducible crash trying to start Extreme Tux Racer the first time.

[37] Created a new user (switchuser) with 'adduser switchuser' and 'passwd switchuser'. When I went to the login dialog to switch users, the switchuser login name was not blank. However, all switch-related functionality worked

[38] Suspend from Gnome only resulted in a full shutdown. Using the 'suspend' command-line option hung. This is with the live image.

[39] It properly detected a new monitor, but did not return to single head mode when that monitor was disconnected. This was on the VGA port

[40] /OT wow, nice! thank you all! OT/

[41] Totem crashes after choosing File-Open

[42] Xorg segfaulted on exit File:Fmos-Restartx Xorg 0.log.gz

[43] File:Fmos.renderchecklog.gz

[44] FreeDesktop Bugzilla – Bug 34429

[1]

[2]

[1]

[2]

[3]

[1]

[2]

[3]

[4]

[5]

[1]

[2]

[3]

[4]

[5]

[1]

[2]

[3]

[4]

[5]

[6]

[1]

[2]

[3]

[4]

[5]

[6]

[1]

[2]

[1]

[2]

[3]

[4]

[1]

[2]

[3]

[4]

[5]

[6]

[1]

[2]

[3]

[4]

[5]

[1]

[1]

[1]

[2]

[3]

[1]

[2]

[3]

[1]

[2]

[1]

[2]

[1]

[2]

[3]

[1]

[2]

[3]

[1]

[1]

[2]

[1]

[2]

[3]

@@ Line 407: / Line 407: @@
 | Geforce 7025 10de:053e<references/>
 |-
-| [[User:jdashton|jdashton]]
+| [[User:Jdashton|jdashton]]
 | [http://www.smolts.org/client/show/pub_80dd17c0-d3c2-4acd-a3f6-8033101f9a3c HW]
 | {{result|pass}}
-| {{result|fail}} <ref>System gets stuck in a loop and cannot start either desktop</ref>
+| {{result|fail}} <ref>System gets stuck in a loop and cannot start either desktop</ref>{{result|pass}} <ref>Removed external monitor and was able to log in using only laptop screen</ref>
 | N/A
 | N/A

Search