From Fedora Project Wiki

(Rewritten the dependency generation part to reflect the mingw32-filesystem >= 68 changes)
(.def files shouldn't be bundled as they are unneeded)
Line 264: Line 264:


  %{_mingw32_bindir}/foo.dll
  %{_mingw32_bindir}/foo.dll
%{_mingw32_bindir}/foo.def
  %{_mingw32_libdir}/foo.dll.a
  %{_mingw32_libdir}/foo.dll.a
  %{_mingw32_libdir}/foo.la
  %{_mingw32_libdir}/foo.la


All files are required in those locations in order to link
All files are required in those locations in order to link
successfully, except that the <code>.def</code> file is not always
successfully, except that the <code>.dll</code> may contain
built by libtool for reasons unknown, and the <code>.dll</code> may
a version number although not always (eg. <code>foo-0.dll</code>).
contain a version number although not always
 
(eg. <code>foo-0.dll</code>).
Some packages also install a <code>.def</code> file in %{_mingw32_libdir}.
Such files can usually be deleted as they only contain information
which is needed to generate the <code>.dll</code> file in question and serve
no purpose for packages which want to link against these .dll files.


== Do not use %{_mingw32_bindir}/* or %{_mingw32_libdir}/* in %files section ==
== Do not use %{_mingw32_bindir}/* or %{_mingw32_libdir}/* in %files section ==

Revision as of 22:17, 30 November 2011

Packaging Guidelines for MinGW Windows cross-compiler

Future Changes
These guidelines apply to all active Fedora releases (including RHEL-6 and older). New guidelines for MinGW have been approved, but are not yet in use: Packaging:MinGW_Future

Introduction

The Fedora MinGW project's mission is to provide an excellent development environment for Fedora users who wish to cross-compile their programs to run on Windows, minimizing the need to use Windows at all. In the past developers have had to port and compile all of the libraries and tools they have needed, and this huge effort has happened independently many times over. We aim to eliminate duplication of work for application developers by providing a range of libraries and development tools which have already been ported to the cross-compiler environment. This means that developers will not need to recompile the application stack themselves, but can concentrate just on the changes needed to their own application.

Track Fedora native package versions

In general terms, MinGW packages which provide cross-compiled versions of packages already natively available in Fedora, should follow the native Fedora package as closely as possible. This means they should stay at the same version, include all the same patches as the native Fedora package, and be built with the same configuration options.

The MinGW SIG have written an RPM comparison tool which makes it possible to compare MinGW packages with the Fedora native packages, in order to determine whether versions, patches and configuration are aligned.

Follow Fedora policy

MinGW packages must follow Fedora policy, except where noted in this document. MinGW packages go through the same review process, CVS admin process etc as other Fedora packages.

Package naming

Built packages should be named by prefixing the upstream package name with mingw32-

Source packages can be named starting with mingw- in order to more easily support a transition to the new MinGW guidelines which mandate that naming. Otherwise two separate package repositories must be set up ("mingw32-foo" and "mingw-foo") with one needing to be marked EOL.

Base packages

The base packages provide a root filesystem, base libraries, binutils (basic programs like 'strip', 'ld' etc), the compiler (gcc) and the Win32 API. Packages may need to depend on one or more of these. In particular, almost any conceivable package should depend on mingw32-filesystem and mingw32-runtime.

mingw32-filesystem Core filesystem directory layout, and RPM macros for spec files. Equivalent to 'filesystem' RPM
mingw32-runtime Base libraries for core MinGW runtime & development environment. Equivalent to glibc & glibc-devel RPMs
mingw32-binutils Cross-compiled binutils (utilities like 'strip', 'as', 'ld') which understand Windows executables and DLLs. Equivalent to 'binutils' RPM
mingw32-w32api Win32 API. A free (public domain) reimplementation of the header files required to link to the Win32 API. No direct equivalent in base Fedora - glibc-devel is closest
mingw32-gcc GNU compiler collection. Compilers for C and C++ which cross-compile to a Windows target. Equivalent to gcc RPM

Filesystem layout

[root]
  |
  +- etc
  |   |
  |   +- rpm
  |       |
  |       +- macros.mingw32
  |
  +- usr
      |
      +- bin   - Links to cross compiler toolchain
      |   |
      |   +- i686-pc-mingw32-cpp
      |   +- i686-pc-mingw32-gcc
      |   +- i686-pc-mingw32-g++
      |   +- ... etc..
      |
      +- lib
      |   |
      |   +- rpm
      |       |
      |       +- mingw32-defs   - custom helper scripts for auto-requires, binary stripping, etc
      |       +- mingw32-find-provides.sh - extra DLL names
      |       +- mingw32-find-requires.sh - discover required DLL names
      |
      +- i686-pc-mingw32  - root of mingw toolchain and binaries - see next diagram


/usr/i686-pc-mingw32
  |
  +- bin  - Cross compiler toolchain  
  |   |
  |   +- cpp
  |   +- gcc
  |   +- g++
  |   +- ... etc ...
  |
  +- lib  - Cross compiler toolchain support libraries / files
  |
  +- sys-root  - root for cross compiled binaries
      |
      +- mingw
          |
          +- bin     - cross-compiled binaries & runtime DLL parts
          +- doc     - documentation
          +- include - include files for cross compiled libs
          +- lib     - cross-compiled static libraries & linktime DLL parts
          |   |
          |   +- pkgconfig  - pkg-config definitions for libraries
          |
          +- share
              |
              +- man

Filenames of the cross-compilers and binutils

The cross-compilers and binutils are Fedora binaries and are therefore placed in %{_bindir} (ie. /usr/bin) according to the FHS and Fedora guidelines.

The cross-compilers and binutils which generate i686 binaries for Windows are named:

%{_bindir}/i686-pc-mingw32-gcc
%{_bindir}/i686-pc-mingw32-g++
%{_bindir}/i686-pc-mingw32-ld
%{_bindir}/i686-pc-mingw32-as
%{_bindir}/i686-pc-mingw32-strip
etc.

The same binaries are present in %{_prefix}/i686-pc-mingw32/bin without any prefix in the name, ie:

%{_prefix}/i686-pc-mingw32/bin/gcc
%{_prefix}/i686-pc-mingw32/bin/g++
%{_prefix}/i686-pc-mingw32/bin/ld
%{_prefix}/i686-pc-mingw32/bin/as
%{_prefix}/i686-pc-mingw32/bin/strip
etc.

Naming of the root filesystem

The root filesystem contains Windows executables and DLLs and any other Windows-only files. It is necessary both because we need to store Windows libraries in order to link further libraries which depend on them, and also because MinGW requires a root filesystem location. The location (for i686 target) is provided by the macro:

%{_mingw32_sysroot}   %{_prefix}/i686-pc-mingw32/sys-root

Standard mingw RPM macros

The mingw32-filesystem package provides a number of convenience macros for the cross compiled sysroot directories, and toolchain. It is mandatory to use these macros in all MinGW packages submitted to Fedora.

Toolchain macros

The following macros are for the %build and %install section of the spec

_mingw32_ar i686-pc-mingw32-ar cross compiler 'ar' binary
_mingw32_cc i686-pc-mingw32-gcc cross compiler 'gcc' binary
_mingw32_cflags -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions --param=ssp-buffer-size=4
_mingw32_configure CC="%{_mingw32_cc}" CFLAGS="%{_mingw32_cflags}" ./configure --build=%_build --host=%{_mingw32_host} --target=%{_mingw32_target} --prefix=%{_mingw32_prefix} standard invocation for autotools 'configure' scripts
_mingw32_cpp i686-pc-mingw32-gcc -E cross compiler 'cpp' binary
_mingw32_host i686-pc-mingw32 Host platform for build
_mingw32_objdump i686-pc-mingw32-objdump cross compiler 'objdump' binary
_mingw32_ranlib i686-pc-mingw32-ranlib cross compiler 'ranlib' binary
_mingw32_strip i686-pc-mingw32-strip cross compiler 'strip' binary
_mingw32_target i686-pc-mingw32 Target platform for build

Filesystem location macros

The following macros are for use in %build, %install and %files sections of the RPM spec

_mingw32_bindir %{_mingw32_prefix}/bin Location of Windows executables.
_mingw32_datadir %{_mingw32_prefix}/share Shared data used under Windows.
_mingw32_docdir %{_mingw32_prefix}/share/doc Documentation.
_mingw32_infodir %{_mingw32_prefix}/share/info Info files (see note below).
_mingw32_includedir %{_mingw32_prefix}/include Header files used when cross-compiling for Windows.
_mingw32_libdir %{_mingw32_prefix}/lib Windows libraries (see sections below).
_mingw32_libexecdir %{_mingw32_prefix}/libexec
_mingw32_mandir %{_mingw32_prefix}/share/man Man pages (see note below).
_mingw32_prefix %{_mingw32_sysroot}/mingw Windows equivalent of %{_prefix}, required by MinGW.
_mingw32_sbindir %{_mingw32_prefix}/sbin
_mingw32_sysconfdir %{_mingw32_prefix}/etc Configuration files used when running under Windows.
_mingw32_sysroot %{_prefix}/i686-pc-mingw32/sys-root Windows system root.

Dependencies

If a package contains binaries which depend on a DLL provided by another package, these dependencies should be expressed in the form:

mingw32(foo.dll)

where foo.dll is the name of the DLL. The name must be converted to lowercase because Windows binaries contain case insensitive dependencies.

All packages should depend on mingw32-filesystem.

Correct dependency generation is done automatically when using mingw32-filesystem >= 68 which is available in Fedora 15 and above.

When a package also needs to be made available for RHEL-5 or RHEL-6 then packagers should include these lines in their packages:

%global _use_internal_dependency_generator 0
%global __find_requires %{_mingw32_findrequires}
%global __find_provides %{_mingw32_findprovides}

All specfiles should BuildRequire at least:

BuildRequires:  mingw32-filesystem >= minimum-version

and any other BuildRequires that they need.

Build architecture

All packages should have:

BuildArch: noarch

unless they contain Fedora native executables.

Libraries (DLLs)

All libraries must be built as DLLs.

Because of the peculiarity of Windows, DLLs are stored in the %{_mingw32_bindir} directory, along with a control file in the %{_mingw32_libdir} directory. For example, for a library called foo there would be:

%{_mingw32_bindir}/foo.dll
%{_mingw32_libdir}/foo.dll.a
%{_mingw32_libdir}/foo.la

All files are required in those locations in order to link successfully, except that the .dll may contain a version number although not always (eg. foo-0.dll).

Some packages also install a .def file in %{_mingw32_libdir}. Such files can usually be deleted as they only contain information which is needed to generate the .dll file in question and serve no purpose for packages which want to link against these .dll files.

Do not use %{_mingw32_bindir}/* or %{_mingw32_libdir}/* in %files section

The %files section must list DLLs separately. Packages must NOT use %{_mingw32_bindir}/* or %{_mingw32_libdir}/*

The reason for this is that libtool is very fragile and will give up on building a DLL very easily. Therefore we force the name of the DLL to be listed explicitly in the %files section in order to catch this during RPM builds.

Manpages and info files

If manpages or info files are simply duplicates of equivalent documentation found in Fedora native packages, then they should not be packaged in the MinGW package.

Static libraries

In accordance with ordinary Fedora policy, static libraries should not be built, and if they are then they should be placed in a -static subpackage.

The exception is the base package mingw32-w32api which contains static libraries that are required for GCC to create executables.

Stripping

Libraries and executables should be stripped. This is done correctly and automatically if the spec file includes these lines:

%global __strip %{_mingw32_strip}
%global __objdump %{_mingw32_objdump}

(Note that if __strip and __objdump are not overridden in the specfile then this can sometimes cause Windows binaries to be corrupted).

Example Specfile

%global __strip %{_mingw32_strip}
%global __objdump %{_mingw32_objdump}
%global _use_internal_dependency_generator 0
%global __find_requires %{_mingw32_findrequires}
%global __find_provides %{_mingw32_findprovides}
%define __debug_install_post %{_mingw32_debug_install_post}

Name:           mingw-example
Version:        1.2.3
Release:        1%{?dist}
Summary:        

License:        LGPLv2+
Group:          Development/Libraries
URL:            
Source0:        

BuildArch:      noarch

BuildRequires:  mingw32-filesystem
BuildRequires:  mingw32-gcc
BuildRequires:  mingw32-binutils
# Any additional BuildRequires.

%description
# description

%package -n mingw32-example
Summary:
%description -n mingw32-example
# description


%{?_mingw32_debug_package}


%prep
%setup -q -n example-%{version}


%build
%{_mingw32_configure}
make %{?_smp_mflags}


%install
make DESTDIR=$RPM_BUILD_ROOT install

# Remove static libraries but DON'T remove *.dll.a files.
rm $RPM_BUILD_ROOT%{_mingw32_libdir}/libfoo.a


%files -n mingw32-example
%doc COPYING
%{_mingw32_bindir}/foo.dll
%{_mingw32_libdir}/foo.dll.a
# etc.


%changelog
* Wed Sep 10 2008 Richard W.M. Jones <rjones@redhat.com> - 1.2.3-1
- Initial RPM release.