EPEL:Packaging

This page contains guidelines which are no longer relevant to Fedora, but still apply to EPEL packages. These guidelines are designed to avoid conflict with the larger Fedora Packaging Guidelines, but should any conflicts occur, these guidelines should take precedence (on EPEL packages).

As a reminder, these guidelines only apply to EPEL packages, not to Fedora packages.

Previously required boilerplate

The epel-rpm-macros package sets defaults for some items and provides other macros which were previously required to be included or manually defined in EPEL6 and/or EPEL5. While these macros were tested with all existing EPEL package, some of them are provided through the use of RPM macro trickery and can have side effects in some cases. The items which are provided:

Item	Release	Info
Buildroot:	EPEL5	Set to the buildroot Fedora uses if not specified.
Group:	EPEL5	Is set to "Unspecified" if not provided. Works for subpackages, too.
%license	EPEL5, 6	Maps to %doc. Previously required manual definition. Is not defined if the SCL macros package is present on the system.
%install buildroot cleaning	EPEL5	rm -rf %buildroot will always be inserted at the beginning of %install regardless of whether it is already present.
%clean	EPEL5	A %clean section is always provided. If one is already included in the spec, it will be ignored but it must not be the first section after %description (which is not the normal place for the section in any case). If it is located there, its contents may be appended to the %description instead.

%autosetup

The %autosetup macro is available in all EPEL releases (via epel-rpm-macros for EPEL5 and EPEL6).

For EPEL5, there is but a single caveat. As the old version of RPM in EPEL5 does not support the patches (as well as the sources) table in the lua namespace, it is instead generated by iterating over 100000 possible PatchXXX: entries. If for some reason you have patches numbered higher than Patch100000: then you should set %el5_patches_limit to some value which equals or exceeds the highest patch number you have

Limited Arch Packages

When RHEL ships a package for only a subset of available arches, it's possibly for EPEL to ship that same package in order to satisfy dependencies in the other arches in EPEL. In order to do this:

1. Make sure the package is not shipped for all architectures. The valid architectures are:
   • EPEL5: i386, ppc, x86_64
   • EPEL6: i686, ppc64, x86_64
   • EPEL7: ppc64, ppc64le, x86_64.
2. Make sure the package meets the Fedora licensing and distribution rules. Nothing non-free or under an unacceptable license.
3. Notify the epel-devel list of your intention to add this package.
4. Change the release of the package to have a leading 0. EXAMPLE: RHEL has foobar-1.0-1, you change it to foobar-1.0-0.1 for EPEL.
5. Add a Changelog entry that the package was added to EPEL and has a 0 leading version to keep it older than RHEL.
6. Submit a Package SCM admin request asking for the el5, el6 or epel7 branch you need.
7. Import and build your package, submit as update.
8. Watch the RHEL version of the package. When it updates, you should update the EPEL version too. You should never update other than that.

NOTE: Do not add ExclusiveArch tags, this will break building on the other architectures!

EPEL 6 and earlier

Provides and Requires Filtering

EPEL ONLY
These filtering mechanisms are considered deprecated in Fedora packages and must not be used there.

Generic Filtering on EPEL6

On EPEL6, the version of rpm is too old to support the Fedora methods of filtering Provides and Requires. Please the older guidelines instead: EPEL:Packaging_Autoprovides_and_Requires_Filtering

Perl Provides and Requires on EPEL5 and older

Unfortunately, the modern macros for Provides and Requires Filtering (Packaging:AutoProvidesAndRequiresFiltering) do not work for EPEL 5 or older. There are two mechanisms for filtering Perl Provides and Requires in EPEL, either In %prep or via External scripts.

In %prep (preferred)

Filtering can be done entirely in the SPEC file, in the %prep section:

%prep
%setup -q -n Foo-%{version}

cat << \EOF > %{name}-prov
#!/bin/sh
%{__perl_provides} $* |\
sed -e '/perl(unwanted_provide)/d'
EOF

%global __perl_provides %{_builddir}/%{name}-%{version}/%{name}-prov
chmod +x %{__perl_provides}


cat << \EOF > %{name}-req
#!/bin/sh
%{__perl_requires} $* |\
sed -e '/perl(unwanted_require)/d'
EOF

%global __perl_requires %{_builddir}/%{name}-%{version}/%{name}-req
chmod +x %{__perl_requires}

External filtering

Or the script can be placed in an external file and referenced from the specfile. This is worse than the above because the full path of the to-be-overridden script needs to be hardcoded into the file, ignoring the system rpmbuild config. It is, however, the method used by a significant number of existing packages.

Source98: filter-provides.sh
Source99: filter-requires.sh

%global __perl_provides %{SOURCE98}
%global __perl_requires %{SOURCE99}

where filter-provides.sh contains:

#!/bin/sh
/usr/lib/rpm/perl.prov $* |
sed -e '/perl(unwanted_provide)/d'

and filter-requires.sh contains:

#!/bin/sh
/usr/lib/rpm/perl.req $* |
sed -e '/perl(unwanted_require)/d'

PHP PEAR Macros

On EPEL (EL-5/EL-6), the "%{pear_macrodir}" macro is not defined. The simplest fix is to add this line to your spec file:

%{!?pear_metadir: %global pear_metadir %{pear_phpdir}}

Alternately, simply use %{pear_phpdir} instead.

Python

Multiple macros are being used in recent python packages that are not available in EL5 and EL6.

Macro name	Line to fix it	Possible alternative
%{__python2}	%{!?__python2: %global __python2 /usr/bin/python2}	%{__python}
%{python2_sitelib}	%{!?python2_sitelib: %global python2_sitelib %(%{__python2} -c "from distutils.sysconfig import get_python_lib; print(get_python_lib())")}	%{python_sitelib}
%{python2_sitearch}	%{!?python2_sitearch: %global python2_sitearch %(%{__python2} -c "from distutils.sysconfig import get_python_lib; print(get_python_lib(1))")}	%{python_sitearch}
%py2_build	%{!?py2_build: %global py2_build %{expand: CFLAGS="%{optflags}" %{__python2} setup.py %{?py_setup_args} build --executable="%{__python2} -s"}}	CFLAGS="%{optflags}" %{__python} setup.py %{?py_setup_args} build --executable="%{__python2} -s"
%py2_install	%{!?py2_install: %global py2_install %{expand: CFLAGS="%{optflags}" %{__python2} setup.py %{?py_setup_args} install -O1 --skip-build --root %{buildroot}}}	CFLAGS="%{optflags}" %{__python} setup.py %{?py_setup_args} install -O1 --skip-build --root %{buildroot}

EPEL 5 and earlier

Building packages for EPEL 5 on non EL5 machines

If you are receiving md5sum errors when building on non EL5 machines please try the following steps:

1) fedpkg clone <package>
2) fedpkg switch-branch el5
3) <make changes>
4) fedpkg srpm
5) koji build --scratch dist-5E-epel file.el5.src.rpm 
6) Verify build completes
7) fedpkg commit 
8) fedpkg push
9) fedpkg build

PHP ABI Check Handling

For Fedora EPEL 5:

%global php_apiver  %((echo 0; php -i 2>/dev/null | sed -n 's/^PHP API => //p') | tail -1)

BuildRequires: php-devel
Requires:      php-api = %{php_apiver}

There is no way of checking the ABI with packages for Fedora EPEL 5.

For a spec file which is compatible with both Fedora and EPEL 5:

%global php_apiver  %((echo 0; php -i 2>/dev/null | sed -n 's/^PHP API => //p') | tail -1)

%if 0%{?php_zend_api}
Requires:     php(zend-abi) = %{php_zend_api}
Requires:     php(api) = %{php_core_api}
%else
Requires:     php-api = %{php_apiver}
%endif

PHP PECL Module Scriptlets

On EPEL5, the Fedora scriptlets for properly registering and unregistering the module have to be wrapped with conditionals checking for the existence of %{pecl_install} and %{pecl_uninstall}:

%if 0%{?pecl_install:1}
%post
%{pecl_install} %{pecl_xmldir}/%{name}.xml >/dev/null || :
%endif


%if 0%{?pecl_uninstall:1}
%postun
if [ $1 -eq 0 ]  ; then
%{pecl_uninstall} %{pecl_name} >/dev/null || :
fi
%endif

pkgconfig

rpm in EPEL5 does not automatically create dependencies for pkgconfig files. Packages containing pkgconfig(.pc) files must Requires: pkgconfig (for directory ownership and usability).

python byte compilation

In EPEL5 the automatic byte compilation of python files that is performed by brp-python-bytecompile byte compiles all files that match *.py This is undesirable for program files in %{_bindir} and %{_sbindir} because the user will probably never invoke these files, only the main program file and python won't use these files. There are two workarounds:

1. Rename scripts in %{_bindir} to not have a .py extension: For instance, from /usr/bin/orient.py to /usr/bin/orient.
2. Use %exclude to exclude the scripts from the file listing:

   %files
   %{_bindir}/orient.py
   %exclude %{_bindir}/orient.pyc
   %exclude %{_bindir}/orient.pyo
   

noarch subpackages

EL 5 and earlier do not support noarch subpackages. If your build fails due to unpackaged debuginfo files ensure that the BuildArch: noarch is wrapped in an if to make sure its not used on EL-5 and earlier.

xz compression

Tar in EL 5 and earlier does not support extracting xz-compressed tarballs. To extract such tarballs, use the following %prep section:

%prep
xzcat %{SOURCE0} | tar -xf -
%setup -qDT

Scrollkeeper

For EL-5, Gnome and KDE use the scrollkeeper cataloging system to keep track of documentation installed on the system. Scrollkeeper allows the help system to sort and search documentation metadata stored in .omf files. When you add documentation in these systems you need to make scrollkeeper aware that the documentation has been changed.

Note that we BuildRequires scrollkeeper as most Makefile's are setup to install the necessary scrollkeeper files only if scrollkeeper is present at install time.

BuildRequires:  scrollkeeper
Requires(post): scrollkeeper
Requires(postun): scrollkeeper
...
%post
scrollkeeper-update -q -o %{_datadir}/omf/%{name} || :

%postun
scrollkeeper-update -q || :

These two scriptlets tell scrollkeeper to update its indexes to account for the new scrollkeeper files.

GConf Scriptlets

In Fedora, we now use macros for our GConf2 scriptlets, but for EL-5, this is not an option. For those targets, please use the old manual scriptlets, as documented below:

Requires(pre): GConf2
Requires(post): GConf2
Requires(preun): GConf2
...
%pre
if [ "$1" -gt 1 ] ; then
export GCONF_CONFIG_SOURCE=`gconftool-2 --get-default-source`
gconftool-2 --makefile-uninstall-rule \
%{_sysconfdir}/gconf/schemas/[NAME] .schemas >/dev/null || :
fi

In this section we uninstall the old schemas when we upgrade. The way we do this is first to get information about where gconf stores its values via the gconftool-2 --get-default-source line. Then we uninstall the schema from that source. If the package could be upgrading a package which had another name for the schema at one time, then we uncomment the lines to uninstall those as well.

The next section is for installing the new schema:

%post
export GCONF_CONFIG_SOURCE=`gconftool-2 --get-default-source`
gconftool-2 --makefile-install-rule \
%{_sysconfdir}/gconf/schemas/[NAME] .schemas > /dev/null || :

Here we do the same things as in the %pre section for upgrading except the gconftool-2 switch used is --makefile-install-rule to install the new schemas instead of the uninstall-rule to remove the old schemas.

The last section deals with deleting the schemas on package removal:

%preun
if [ "$1" -eq 0 ] ; then
export GCONF_CONFIG_SOURCE=`gconftool-2 --get-default-source`
gconftool-2 --makefile-uninstall-rule \
%{_sysconfdir}/gconf/schemas/[NAME] .schemas > /dev/null || :
fi

This snippet is nearly the same as the one for upgrading. Why can't we just combine this portion with the %pre portion? The answer is that we want to delete any old versions of the schema during an upgrade. But this has to happen before we install the new version (in the %post script) otherwise we end up removing the schema that the upgrading package installs. However, if it really is a removal that will leave no other instances of this package on the system, we have to clean up the schema before deleting it.

Scriptlets requirements

Do not use the Requires(pre,post) style notation for scriptlet dependencies, because of two bugs in RPM. Instead, they should be split like this:

Requires(pre): ...
Requires(post): ...

For more information, see this mailing list post .