From Fedora Project Wiki

< QA‎ | TestPlans

(Adding instruction for "loop disk" label error)
Line 236: Line 236:
Note: if you get the error "Partition isn't marked bootable!" you'll have to run parted (you'll get a nice error message). However, you might get the error "Error: The flag 'boot' is not available for loop disk labels" when running parted. To fix this run:
Note: if you get the error "Partition isn't marked bootable!" you'll have to run parted (you'll get a nice error message). However, you might get the error "Error: The flag 'boot' is not available for loop disk labels" when running parted. To fix this run:


syslinux -s /dev/sdb1
# syslinux -s /dev/sdb1


which will set the disk label to "msdos".
which will set the disk label to "msdos".

Revision as of 12:59, 8 October 2008

Introduction

This document describes the test process by which Fedora 10 will be verified for operation consistent to that of other common laptop hardware.

The goals of this plan are to:

  • Organize a community test effort
  • Communicate the strategy, scope and priorities of the planned tests to all relevant stake-holders for their input and approval
  • Serve as a base for the test planning for future Fedora releases
FIXME - Outline exit criteria
What bugs should be prioritized by development? How do we know if something should be fixed or not?

Strategy

In an effort to focus testing on specific XO hardware, the test strategy will be to:

  1. Define a set of high-level test areas that group similar functional components together
  2. Organize volunteers into teams, each team focused on a specific test area
  3. Teams will develop a rough test plan for their test area. Each team can dictate the required level of testing (both in terms of depth and breadth)

As no centralized automation is available, test teams are encouraged to leverage exploratory testing and built-in unit-tests where possible.

Use existing tools to facilitate writing new test builds to the XO's SD card (see livecd-iso-to-disk.sh).

Schedule

An up-to-date schedule for Fedora 10 is available at Releases/10/Schedule. A summary of Fedora XO related test milestones is noted below.

Date Milestone
Tue 2008-09-30 Public beta
Fri 2008-10-10 Snapshot#1
Fri 2008-10-17 Snapshot#2
Fri 2008-10-24 Snapshot#3
Tue 2008-11-04 Preview release
Tue 2008-11-25 General Availability

Scope

The scope of all testing should be representative of the XO hardware under test. No need to test Gigabit ethernet if the XO doesn't provide such an adapter. See the test area break down for more details.

Items not tested:

  • Installation of Fedora on an XO - only live image booting from the SD is planned for Fedora 10
FIXME
Do we need to test persistent storage on the live image?

Test Areas

Built-in Camera

  • What applications can be used to verify the camera?
  • Laptop microphone/camera in-use indicators behave as expected

Power Management

  • Suspend/resume
  • Hibernate
    • close lid
    • low battery
  • Use and report findings from powertop
    • Measure battery usage?
  • Display brightness configuration (dim when idle)
  • Remove/add power adapter while running
  • Laptop Power/battery indicators behave as expected

Networking

  • Wireless networking
    • laptop wifi status indicator behaves as expected
    • firmware loaded by NM
    • can connect using various methods (None/WEP/WPA)
    • VPN?
    • Sharing an ad-hoc network w/ another XO

Display

  • xrandr rotation?
  • Using expected driver and resolution settings
  • Changing vt's back and forth
  • Coming out of suspend?
  • touchpad interface?
  • gamepad interface?
  • Brightness up/down accelerator key?
  • plymouth graphical boot enabled+working by default?

Audio

  • pulse audio default settings (not muted)
  • various mixer settings visible/editable (ala gnome-volume-control)
  • gnome system sounds enabled
  • Recording (ala gnome-sound-recorder)
  • headphone jack / internal speaker
  • Volume up/down accelerator key?

Other

  • test USB port
  • Anything specific to boot processing (plymouth noted above)
  • Default configured services?

Responsibilities

This section outlines the test teams and various community points of contact.

Each test area is being split up for a different team of experts to deep dive into. The table below will be used to outline the teams and their focus areas.

Test Area Team Name Team Members
Example: Orbital Laser Team Dunder Mifflin Jim, Pam, Stanley
Built-in Camera
Power Management
Networking
Display
Audio

HOWTO's

The following sections are intended to provide high-level instructions for common tasks encountered by a Fedora XO tester.

File Fedora XO bugs

All bugs will be tracked in Bugzilla.

Please file all bugs found while testing Fedora on the XO with the following parameters:

  • product = Fedora
  • version = rawhide
  • blocks = FedoraOnXO

For convenience, you can file an new Fedora XO bug by clicking here.

Triage NEW Fedora XO Bugs

To help with triaging ...

  1. Start with the list of NEW Fedora XO bugs at http://tinyurl.com/52wclh

For each bug, ask yourself the following questions:

  1. Is the bug specific to the XO hardware or environment?
  2. Was the following information provided?
    • Build tested (rawhide-YYYYMMDD or package versions)
    • Clear steps to reproduce the problem

If the above requirements have been met, please:

  1. Mark the bug as blocking 461806 (FedoraOnXO)
  2. Change to bug state to ASSIGNED

For further reading, the bug triage process is described in more detail at BugZappers.

Test a MODIFIED Fedora XO Bug

FIXME - provide tinyurl link to MODIFIED Fedora XO Bugs

Ask the following questions:

  1. Are you able to confirm that the steps to reproduce no longer trigger the failure?
  2. Have any new bugs been introduced as a result of the fix?
  3. Are any release notes required?

When comfortable with the fix:

  1. Add a comment indicating which build or software packages were tested
  2. Change the bug state to CLOSED with a resolution of RAWHIDE

If the reported issue has not been addressed:

  1. Add a comment indicating which build or software packages were tested that still exhibit the failure
  2. Change the state to ASSIGNED

Documentation

Getting Started

FIXME
need more docs!
  • What are the requirements for testing?
    • List matching hardware
    • Known issues on older XO's?
  • How to sign-up for a team?
  • How to communicate issues?
  • Where to go for help?
    • fedora-test-list
    • #fedora-qa
  • Where are test images posted?

Installing your SD card

Requirements:

  • Another computer to flash the SD card
  • SD reader
  • SD card - specifically a Sandisk Extreme III SD card (either 2 Gig or 4 Gig capacity).
  • An internet connection

To install a live image to your SD card:

  1. Download the installation script: 
    # wget http://katzj.fedorapeople.org/olpc/livecd-iso-to-disk.sh
  2. Download an OLPC Fedora Live image from: 
    # wget http://katzj.fedorapeople.org/olpc/olpc-gnome.iso
  3. Write the live image to your SD card: 
    # bash livecd-iso-to-disk.sh --xo --extra-kernel-args 3 /tmp/olpc-gnome.iso /dev/sdb1

Note: if you get the error "Partition isn't marked bootable!" you'll have to run parted (you'll get a nice error message). However, you might get the error "Error: The flag 'boot' is not available for loop disk labels" when running parted. To fix this run:

  1. syslinux -s /dev/sdb1

which will set the disk label to "msdos".

Prepare the XO for another OS

  1. Follow the clean-install procedure
  2. Boot the XO and connect to a nearby wireless network
    • To find OLPC mac address ... press <ctrl><alt><Neighborhood>. Then type 
      ip addr list eth0
  3. Go to Software update in the Control Panel and apply any updates
  4. Obtain a developer key (see http://wiki.laptop.org/go/Developer_key#Getting_a_developer_key_for_your_running_XO_laptop)
    1. Load the Browse activity
    2. Navigate to file:///home/.devkey.html
      • Follow the instructions on the page
    3. Wait for developer key activation (more information at https://www.redhat.com/archives/fedora-test-list/2008-October/msg00229.html)
    4. Download key using instructions provided
  5. Reboot
    • You should see a count-down on boot and be able to press the <Escape> key in order to drop into OF


FAQ

Retrieved from "https://fedoraproject.org/w/index.php?title=QA/TestPlans/Fedora10_On_XO&oldid=53960"