From Fedora Project Wiki
DATE TIME WHERE
Wed Feb 23, 2011 ALL DAY #fedora-test-day webchat
Arriving after the date above?
If you come to this page after the test day is completed, your testing of Radeon is still valuable, and you can use the information on this page to test Radeon with your graphics card and provide feedback. If you are visiting after the release of Fedora 15, please wait for the next Radeon test day.

What to test?

Today's Fedora Test Day will focus on the radeon driver for ATI/AMD Radeon graphics cards.

If you come to this page after the test day is completed, your testing is still valuable, and you can use the information on this page to test with your graphics card and provide feedback.

Who's available

The following cast of characters will be available for testing, workarounds, bug fixes, and general discussion...

What's needed to test

  • An ATI Radeon (or FireGL) graphics adapter. To confirm whether you have supporting hardware, run the following command under root:
    /sbin/lspci -d 1002: | grep -iq VGA && echo "Join Radeon Fedora Test Day" || echo "Sorry, no Radeon graphics hardware found."
  • An updated Fedora 42 pre-release, or the special live image (see below)
  • Your hardware profile uploaded to Smolt according to these instructions
Shell support broken on later cards
All cards of the R600 generation and later - that is, Radeon HD 2xxx and later - are currently believed to be encountering a bug which causes Mutter (the GNOME 3 window manager) to crash when trying to load GNOME Shell in the 32-bit image - Bugzilla: #677842. If you encounter this crash, mark the GNOME 3 start test as fail, link to that bug report, and CC yourself on the report if you would like to follow progress on a fix. Then please test with the 64-bit image, which should work.

How to test?

Update your machine

If you're running Fedora 42, make sure you have all the current updates for it installed, using the update manager. Or you can use a live image:

Live image

Optionally, you may download a non-destructive Fedora 42 live image for your architecture. Tips on using a live image are available at FedoraLiveCD.

Architecture SHA256SUM
i686 4553b73f8fab46fbb85384974decc7f9595e5c7af6df76e303cef5e62a76e07f
x86_64 e59d1886f7b766011b89d88369d09a4dd46bd7ba8a25664e9de0430d0f8725d7

Testing

Follow each of these test cases:

Multihead test case:

You will need two or more monitors to perform the multihead test.

Optional extended OpenGL test cases (some of these will require you to at least move around in games):

These will provide more detailed testing of 3D functionality. Please file bugs for any failures you find if running these tests.

Report your results

If you have problems with any of the tests, report a bug to Bugzilla usually for the component xorg-x11-drv-ati. If you are unsure about exactly how to file the report, just ask on IRC and we will help you. Follow the instructions on this page to ensure you include sufficient information in the report. Once you have completed the tests, add your results to the Results table below, following the example results from Example user as a template. The first column should be your name with a link to your User page in the Wiki if you have one, and the second should be a link to your Smolt hardware profile (see above for a link with instructions on submitting your hardware profile to Smolt). For each test case, use the result template to enter your result, as shown in the example result line. If you could not perform one test (for example, you cannot perform the more advanced tests because the basic one fails, or you cannot perform the multihead test as you have only one display), enter the word N/A. In the comments column, you can enter the model name and PCI device ID (vendor ID is usually 1002) of your card, if you know it - you can usually find this information in the output of the command lspci -nn.

Results

Main tests

User Smolt Profile Basic test GNOME 3 start DPMS XVideo Rotation X restart Rendercheck GLX User switch VT switch Suspend Multihead Comments
Example user HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
N/A
Fail fail [1]
Warning warn [2]
  1. RHBZ #123456
  2. RHBZ #234567
Andreas HW
Pass pass
Inprogress inprogress
Pass pass
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
N/A
Inprogress inprogress
Inprogress inprogress
Jorge HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Fail fail [1]
Pass pass
N/A
Fail fail [2]
Warning warn [3]
  1. RHBZ #segfault
  2. RHBZ #123456
  3. RHBZ #234567
Faelar HW
Warning warn
[1]
Pass pass
Pass pass
Pass pass
Fail fail
[2]
Pass pass
Pass pass
[3]
Pass pass
Pass pass
Pass pass
N/A N/A
  1. Artifacts (Non-persistent black horiz. lines)
  2. Blank screen, I can't do anything then, reboot forced.
  3. renderchecklog.gz
NJM HW
Pass pass
Fail fail
[1]
Pass pass
Fail fail
[2]
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
N/A
  1. GNOME Shell starts and runs, but misrenders nearly everything.
  2. Color corruption outside of the video rectangle
RHBZ: 679579

Several mesa-demo apps misrender. RHBZ: 679588

Jaroslav Pulchart HW rv740
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Warning warn
[1]
Warning warn
[2]
Pass pass
Pass pass
[3]
Pass pass
Pass pass
[4]
Warning warn
[5]
  1. #679841
  2. File:Jaroslav.pulchart rv740 renderchecklog.gz
  3. The switching worked well. Logout is sometimes weird, once I ended in terminal instead in GDM, once it cored sesion of second user,...
  4. Suspend is OK. There is "shut down" instead of "suspend" in Gnome3 shell.
  5. Disabling/Enabling second monitor is not automatic when it is Disconnected/Connected. xrandr command or display properties must be started for detecting this change.
Jaroslav Pulchart HW R580
Pass pass
Pass pass
Pass pass
Pass pass
Fail fail
[1]
Pass pass
Warning warn
[2]
Pass pass
Pass pass
Pass pass
N/A
Inprogress inprogress
  1. Blank screen, reboot required.
  2. File:Jaroslav.Pulchart r580 renderchecklog.gz
Reinout van Schouwen HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Fail fail
[1]
Pass pass
[2]
Pass pass
Pass pass
[3]
Pass pass
[4] [5]
  1. File:Renderchecklog.gz
  2. 36fps in fullscreen mode
  3. After resume, I get an SELinux alert: 'The source process /sbin/consoletype Attempted this access: read On this file: /var/log/pm-suspend.log
  4. File:Xrandr reinouts.out
  5. Gnome shell hot corner doesn't work any more
Reinout van Schouwen HW
Pass pass
Pass pass
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Jordan Clarke HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
MahMahoritos HW
Pass pass
Warning warn [1]
[2]
Pass pass
Pass pass
Pass pass
Pass pass [1]
[3]
Pass pass
[4]
Pass pass
Fail fail
[5]
Warning warn
[6]
Fail fail
[7]
Warning warn
[8]
  1. 1.0 1.1 RHBZ #679685
  2. Gnome Shell doesn't start
  3. Second startx make Gnome Shell working
  4. http://www.fpaste.org/LjZa/
  5. Can't switch users without Gnome Shell, only log out option available
  6. Can't switch back to Gnome, Ctrl+Alt+F1 craches system at all
  7. System sleeps (pm-suspend), then wakes up, but I can't run any programm and 'su' in terminal doesn't work
  8. HDMI hotplug (after log in) doesn't work at all; if HDMI is connected before system starts, then everything works fine, every display supports its native resolution
Philip V HW[1]
Fail fail [2]
[3]
Fail fail
Warning warn
[4]
Warning warn
Fail fail
N/A
Pass pass
[5]
Pass pass
N/A N/A
Fail fail
[6]
Fail fail [7]
[8]
  1. 01:00.0 [0300]: ATI RV280 [Radeon 9200 PRO] [1002:5960] (rev 01) 01:00.1 [0380]: ATI RV280 [Radeon 9200 PRO] (Secondary) [1002:5940] (rev 01) Dual head did work in Fedora 13.
  2. RHBZ #679674
  3. The default boot always gets stuck immediately. 'Boot Basic Video' succeeds. Not sure how to report the rest of these tests as testcases assume no 'nomodeset'; 'Boot Basic Video' uses 'nomodeset'.
  4. All warnings mean: only works with the forbidden 'nomodeset'/'Boot Basic Video'.
  5. https://fedoraproject.org/w/uploads/c/c3/Renderchecklog_RV280.txt
  6. Resume after Suspend from Login Screen has dead keyboard and Mouse
  7. RHBZ #653803
  8. xrandr only sees one monitor with 0Hz refresh rate
MadRouter HW
Pass pass
Warning warn
[1]
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
[2]
Pass pass
Pass pass
[3]
Pass pass
Warning warn
[4]
Pass pass
  1. gnome shell does not start after first boot, start successfully after next boots
  2. File:Radeon renderchecklog madrouter.gz
  3. work fine from gnome 3 shell, N/A from gnome desktop
  4. shut down instead of suspend from gnome 3 shell, but work fine from gnome desktop
dbkblk HW
Pass pass
Warning warn
[1]
Pass pass
Pass pass
Pass pass
Pass pass
Warning warn
[2]
Pass pass
Warning warn
[3]
Warning warn
[4]
Warning warn
[5]
N/A
  1. Gnome shell does not start after first boot (fallback mode), start successfully when logout > login. OK with "gnome-shell --replace".
  2. 44 steps/46. [1](Didn't understood how to upload it here)
  3. The switch worked but when i log out the 2nd user, it fall back into the 1st user session and not gdm !! Moreover, the insight of the overlay window show 3 same nautilus thumbnails instead of the correct thumbnails.
  4. Works, but unusable because a message keep showing each second: “[random numbers...] hub 1-0:1.0 Unable to enumerate USB device on port 2“
  5. Works with “pm-suspend” but the suspend menu of gnome 3 shut down the computer instead of suspending it.
Wyatt Gosling HW
Warning warn
[1]
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
[2]
Pass pass
Pass pass
Pass pass
Pass pass
Warning warn
[3]
  1. Artifacts between Plymouth and login screens.
  2. only 44 of 46 passed. [2]
  3. xrardr output [3]. Login screen chose correct screen as primary, but the session did not. Gnome 3's config tool did not provide a means to fix this. Physically unplugging the display was required for desired behavior.
Mira HW
Pass pass
Warning warn
[1]
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Fail fail
[2]
N/A
  1. Always after 1st log-in Gnome in fallback mode, after log-out log-in Gnome shell started
  2. System didn't suspend successfully, it just simply switched off
geopan HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Inprogress inprogress
[1]
Pass pass
Pass pass
Pass pass
Pass pass
N/A multihead
  1. only 44 of 46 passed, but was unable to upload renderchecklog
lersek HW[1]
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Fail fail
[2]
Pass pass
[3]
Pass pass
Pass pass
Warning warn
[4]
N/A
  1. ATI Technologies Inc RS880 [Radeon HD 4200] [1002:9710]
  2. 44 tests passed of 46 total [4].
  3. glxgears synced to monitor refresh rate, 60Hz.
  4. Desktop machine powered off completely.
Spiro HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
N/A
Ivo Anjo HW [1]
Pass pass
Pass pass
Pass pass
Fail fail
Pass pass
Pass pass
Pass pass
[2]
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
  1. ATI Technologies Inc RV515 PRO [Radeon X1300/X1550 Series] [1002:7142]
  2. File:Renderchecklog.bz2
Vlads HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
[1]
Pass pass
Pass pass
N/A
Pass pass
warning
[2]
N/A
  1. renderchecklog.gz
  2. Shutdown instead of suspend
domk HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
N/A
Pass pass
Pass pass
Pass pass
Pass pass
N/A RS780M/RS780MN Radeon HD 3200 [1002:9612]
Marek Zdunek HW[1]
Pass pass
Fail fail [2] [3]
Pass pass
Pass pass
Warning warn [4] [5]
Warning warn [6]
Warning warn
[7]
Warning warn
[8]
Pass pass
Pass pass
N/A[9] N/A
  1. some logs
  2. RHBZ #677555
  3. RHBZ #679326
  4. RHBZ #677371
  5. RHBZ #677842
  6. RHBZ #677461
  7. 44 tests passed of 46 total renderchecklog
  8. unspecified nautilus crash
  9. shutdown instead of suspend on LiveCD x86_64
User:pfps HW
Pass pass
Fail fail
[1]
none
none
none
none
none
none
none
none
none
none
  1. repeated crashes in mutter
MC HW
Pass pass
Fail fail
[1]
Pass pass
Pass pass
Pass pass
Warning warn
[2]
Fail fail
[3]
Fail fail
[4]
Warning warn
[5]
Pass pass
Warning warn
[6]
N/A
  1. repeated crashes in mutter
  2. not login in gdm
  3. lost when the system is the result of decreased
  4. segmentation failed
  5. not login in gdm
  6. Xorg started manualy from console
pda HW
Pass pass [1]
Fail fail
[2]
Pass pass
Pass pass
Pass pass
Fail fail
[3]
Warning warn
[4]
Fail fail [5]
N/A[6]
Pass pass
Fail fail
[7]
N/A 03:00.0 VGA compatible controller: ATI Technologies Inc Device 689c
  1. RHBZ #678193
  2. No gnome-shell started. Only old gnome-panel.
  3. Only desktop wallpaper and infinite flashing mutter crash notice on second startx. No way to open Abrt.
  4. File:Renderchecklog radeon pda x86.gz
  5. RHBZ #679774
  6. Without gnome-shell there no fast user switching applet.
  7. Computer was sleep forever. (Until reset)
Ferry Huberts HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Fail fail
[1]
Pass pass
Pass pass
Pass pass
Pass pass
Warning warn
[2]
  1. http://pastebin.com/SNbph9VS
  2. after several plug/unplug actions dragging windows around is very slow. logging out and in again fixes it.
V99 Glu HW
Pass pass
Pass pass
Pass pass
Pass pass
[1]
Pass pass
Pass pass
[2]
Pass pass
[3]
Pass pass
Pass pass
Pass pass
[4]
Fail fail
[5]
N/A
  1. test passed, but "menu/Open" crashed totem (by the way, gedit, too)
  2. startx reports a lot of errors File:Testday-20110223-startx.log
  3. File:Testday-20110223-v99glu-renderchecklog.gz
  4. pulseaudio does not work correctly (muted) when I switch from graphical desktop to another one. If I switch from graphical desktop to any text mode console and then to another graphical desktop, then pulseaudio works rightly.
  5. First, "System menu/Suspend..." opens Shutdown dialog, second, about 10 seconds after pm-suspend system does power-off. After system powered-on display stays in standby mode. Only hard reset helps me.
Eric Blake HW
Pass pass
Fail fail [1]
[2]
Pass pass
[3]
Fail fail
[4]
N/A N/A N/A N/A N/A N/A N/A N/A 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)] [1002:5b60]
  1. RHBZ #679849
  2. keyboard and mouse lock up the moment gnome-shell starts
  3. test run in fall-back mode
  4. test run in fall-back mode; gstreamer-properties started fine, but after several minutes, I got a kernel panic, may be same as BZ 679849
VM
Pass pass
Warning warn
[1] [2]
Fail fail [3]
[4]
Warning warn
[5]
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
N/A
  1. into fallback mode, as expected for a VM
  2. encountered BZ 679826 while testing - control-center window is too large for 1024x768
  3. RHBZ #679868
  4. dpms had no effect
  5. totem ran fine; gstreamer-properties fails with "X Window System (X11/XShm/Xv): Could not initialise Xv output"; also gstreamer-properties dumps core if accidentally run as root instead of a normal user
Foppe[1][2] HW
Pass pass
Pass pass
Pass pass
Pass pass
[3]
Pass pass
Pass pass
Warning warn
[4]
Pass pass
[5]
Pass pass
Pass pass
Pass pass
[6]
Warning warn
[7][8]
3D_Pymol works nice.
  1. x86_64 live CD
  2. ATI mobility 5650/1Gb [1002:68c1]
  3. Can't move slider
  4. File:Renderchecklog 2011-02-23 foppe.gz 44 tests passed of 46 total
  5. 60.25 FPS
  6. Suspend from menu results in shutdown, close lid || suspend from shutdown menu OK
  7. startup results in clone /w wrong resolution. Disabling <-> enabling requires login. Once dualhead is activated it works as advertised.
  8. File:Xrandr 2011-02-23 foppe.gz
Cédric Olivier HW
Pass pass
Inprogress inprogress
Pass pass
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
N/A
Ostinru HW
Warning warn
[1]
Pass pass
[2]
Pass pass
Pass pass
Pass pass
N/A
Warning warn
[3]
Pass pass
[4]
Pass pass
Pass pass
Pass pass
N/A
  1. when intel&radeon cards availibl livecd doesn't boot photo. When intel card disabled in BIOS livecd boot sucsesfully
  2. liveDVD loads in gnome2. gnome-shall --replace fix it
  3. 44/46 in gnome shall log
  4. 60FPS is too slow!
Ferry Huberts HW
Warning warn
[1]
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Fail fail
[2]
Pass pass
Pass pass
Pass pass
Fail fail
[3]
Pass pass
  1. First boot I did from live CD resulted in the GNOME panel fallback. 'gnome-shell --replace' to get to the shell worked. Second boot logged in into gnome-shell ok.
  2. http://pastebin.com/4kAxAne2
  3. probably due to the areca raid card, that has always prevented suspend so far
Amir Hedayaty HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Warning warn
[1]
Pass pass
[2]
Warning warn
[3]
Pass pass
Pass pass
N/A
  1. File:Renderchecklog.gz 2124236 tests passed of 2124238 total
  2. In overview mode the frame rate drops dramaticly
  3. GDM does not work with any password! (I use automatic login to login) TODO: file a bug if it is not my own fault
Stéphane Maniaci HW
Pass pass
Pass pass
Pass pass
Pass pass
Warning warn [1]
[2]
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
  1. RHBZ #679867
  2. Didn't work the first time.
Jan Stodola HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Warning warn
[1]
Pass pass
Pass pass
Pass pass
Pass pass
[2]
N/A
  1. File:Jstodola renderchecklog.gz 2124236 tests passed of 2124238 total
  2. using pm-suspend
Madko HW
Pass pass
Pass pass
Pass pass
Warning warn
[1]
Warning warn
[2]
Inprogress inprogress
Pass pass
[3]
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
N/A
  1. Moving windows is snapy over video
  2. Artefacts when rotating screen in dual heads configuration
  3. File:Madko f15 hd4350 Renderchecklog.gz
Elline HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
N/A [1]
Pass pass
Pass pass
Pass pass
Pass pass
N/A
  1. can't upload file
Pavel Holica HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Warning warn
[1]
Pass pass
[2]
Pass pass
Pass pass
Pass pass
N/A
vold HW
Pass pass
[1]
Warning warn
[2][3]
Pass pass
Warning warn
[4]
Pass pass
Pass pass
N/A N/A [5] N/A
passed
N/A N/A
  1. I have some artifacts while switching between console and bootsplash during boot process
  2. Gnome Shell does't start, fallback to gnome-panel. Log-out - log-in does't help. Some elements of UI have the wrong color.screenshot Very similar to #679912
  3. #677555
  4. Xv works fine without compositing. 'compiz-gtk --replace' ends with a segfault.
  5. Can't run a Gnome Shell.
Ralph Giles HW
Pass pass
Fail fail
[1]
Pass pass
Warning warn
[2]
Pass pass
Fail fail
[3]
Warning warn
[4]
N/A N/A
Pass pass
Warning warn
[5]
Warning warn
[6]
Radeon Mobility X1600 [1002:71c5]
  1. fallback to mis-themed gnome-panel. Running 'gnome-shell --replace' ends with a signal 11. Bug #679912
  2. xv tests work without a compositor, running 'compiz-gtk --replace' ends with a segfault and no window manager
  3. initial startx and logout back to console work fine. Second startx shows the background, flashing a black horizontal bar about once a second, and occasionally a mutter abrt notification. Switching back to console shows "Shell killed with signal 11".
  4. soon after starting, test blocks are printed diagonally across the screen. When the run is complete the stride is wrong, so I can tell I have a prompt, but not read any of the output.
  5. Graphics suspend seems to work. Other things break though (commands Bus error after second resume).
  6. Configurations and environment worked fine. However, plug/unplug events didn't seem to be noticed until xrandr was run or gnome-settings display was launched or 'detect monitors' clicked.
Ralph Giles HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
mich HW
Pass pass
Fail fail [1]
N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
  1. RHBZ #679806
bruce89 HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Warning warn
[1]
Pass pass
Pass pass
Pass pass
Fail fail
N/A 03:00.0 VGA compatible controller: ATI Technologies Inc Juniper 68b8
Using test CD, x86_64
  1. [5] 44 tests passed of 46 total
Uwe Kleine-König HW
Warning warn
[1]
Warning warn
[2]
Pass pass
Pass pass
Pass pass
Warning warn
[3]
Pass pass
[4]
Pass pass
[5]
Warning warn
[6]
Pass pass
[7]
Pass pass
N/A Hardware: ATI Technologies Inc RV515 PRO [Radeon X1300/X1550 Series] [1002:7142] + ATI Technologies Inc RV515 PRO [Radeon X1300/X1550 Series] (Secondary) [1002:7162]
  1. needed to pass video=1280x1024 to kernel commandline, otherwise the monitor beeps and flickers
  2. got to the fallback mode, but works during the restart test and after relogin
  3. saw X segfaulting [6]
  4. renderchecklog.gz
  5. ~75 FPS in glxgears
  6. fonts strange, selected text is black on black as are some scrollbars
  7. desktop is on console 7, not 1 for me
Vadim Plessky HW
Pass pass [1]
Fail fail [1]
[2]
Pass pass
[3]
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Fail fail [4]
[5]
Inprogress inprogress
N/A N/A N/A
  1. 1.0 1.1 RHBZ #677931
  2. Crash with GNOME, Login o.k. with KDE Live CD; ATI Technologies Inc RS482 [Radeon Xpress 200M] [1002:5975]
  3. works in KDE, not tested in GNOME as it crashes
  4. RHBZ #679903
  5. crash in glx-utils after executing #glxgears (segfault in r300_dri.so)
Ferry Huberts HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Fail fail
[1]
Pass pass
[2]
Pass pass
[3]
Pass pass
Pass pass
[4]
N/A
  1. can't upload file without being logged in
  2. glxgears is running very irregular with lots of stuttering when I have gnome-system-monitor open at the same time
  3. can't change password of liveuser from control panel
  4. surprisingly, this areca raid raid doesn't prevent suspend
lecbee HW
Warning warn
[1]
Pass pass
Pass pass
Pass pass
Pass pass
N/A
Pass pass
[2]
Pass pass
[3]
N/A N/A
Fail fail
[4]
N/A
  1. When pressing 'Esc' on boot to see what happen, the screen stays black, the top-left corner is marroon and with white dots.
  2. renderchecklog.tar.gz
  3. Works well, synch at 60 FPS, but in some case raises up to 100+ FPS ! This occurs when I put glxgears window in the corner like in this screenshot. When the window stays in the corner, the FPS falls again at 60 FPS on the next '5 seconds'.
  4. The system suspend works, but doesn't resume. The screen stays as 'dpms off'. I must note that I have already this issue on F14.
Andrey Batyiev HW
Pass pass
Fail fail
[1]
Pass pass
Warning warn
[2]
Pass pass
Pass pass
Pass pass
[3]
Pass pass
Warning warn
[4]
Pass pass
Pass pass
[5]
N/A
  1. Fallback mode even after relogin. Running directly gives huge amount of artifacts [7] (FIXME: bugs to file)
  2. It lags sometimes.
  3. File:ABatyiev Renderchecklog Radeon.gz
  4. Unable to run second session — it shows only wallpaper and mouse pointer (movable). Switching by ctrl+alt+f7-8 lags, showing text console
  5. Motherboard doesn't fully support this mode, but it successfully enters and returns suspend mode
Nils Philippsen HW
Pass pass
Warning warn
[1]
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Warning warn
[2]
Pass pass
[3]
Pass pass
[4]
N/A
  1. with the live image, at the very first login I get the "compat desktop" instead of GNOME shell, with subsequent logins it works
  2. start glxgears, switched to second user, started glxgears, switch back, gnome shell crashes but can't reproduce
  3. desktop is on VC7, not VC1 but I don't think this matters
  4. Trying to suspend via GNOME shell shuts the system down instead of suspending
Stéphane Démurget HW
Pass pass
Fail fail [1]
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
[2]
Pass pass
Pass pass
Pass pass
Pass pass
N/A
Nikai HW [1]
Pass pass
Warning warn [2]
[3]
Pass pass
Pass pass
[4]
Pass pass
Inprogress inprogress
Pass pass
[5]
N/A N/A
Inprogress inprogress
Inprogress inprogress
N/A
  1. smoltSendProfile: abrt: detected unhandled Python exception
  2. RHBZ #677555
  3. fallback
  4. compiz-gtk --replace
  5. https://fedoraproject.org/wiki/File:Nikai-r200-renderchecklog.gz
Andrew Ross HW
Pass pass
Pass pass [1]
Pass pass
Pass pass
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
N/A
  1. RHBZ #679326
Adam Huffman TBA
Pass pass
Pass pass
Pass pass
Pass pass
[1]
Fail fail
[2]
Pass pass
Pass pass
[3]
Warning warn
[4]
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
N/A
  1. Some minor artefacts in the video playback
  2. Rotation works but reverting leads to repeated flashing and screen noise - reboot required
  3. File:Renderchecklog-radeon-verdurin-2011-02-23.gz
  4. Worked, but glxgears only 60 FPS
User Smolt Profile Basic test GNOME 3 start DPMS XVideo Rotation X restart Rendercheck GLX User switch VT switch Suspend Multihead Comments

Extended 3D tests

User Smolt Profile Pymol Avogadro OpenArena Tux Racer mesa-demos Comments
Example user HW
Pass pass
Pass pass
N/A
Fail fail [1]
Warning warn [2]
  1. RHBZ #123456
  2. RHBZ #234567
lersek HW
Warning warn
[1]
Fail fail
[2]
Fail fail
[3]
Warning warn
[4]
N/A [5]
  1. very slow
  2. crashed with std::bad_alloc though RAM was free
  3. exiting game crashed X
  4. ran fine, but slowly <15fps
  5. sounds like live environment died during test
Elline HW
Warning warn
[1]
Pass pass
N/A [2]
Pass pass
Pass pass
  1. runs, but very slow
  2. can't install via liveCD
Amir Hedayaty HW
Warning warn
[1]
Pass pass
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
  1. runs, but very slow
Foppe HW
Warning warn
[1]
N/A N/A N/A N/A ATI mobility 5650/1Gb [1002:68c1] x86_64 live CD
  1. Runs fine but slow
Vadim Plessky HW
Warning warn
[1]
N/A N/A N/A N/A ATI Technologies Inc RS482 [Radeon Xpress 200M] [1002:5975] i686 Live CD
  1. Runs with KDE LiveCD, crash GNOME LiveCD
bruce89 HW
Warning warn
[1]
Pass pass
N/A [2]
Warning warn
[3]
Warning warn
[4]
03:00.0 VGA compatible controller: ATI Technologies Inc Juniper 68b8, x86_64 test CD
  1. Runs very slowly
  2. Can't install via liveCD
  3. Slow (~40fps) to very slow (~12fps)
  4. fbo_firecube and terrain : Bus error
Nikai HW
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Warning warn
[1]
Inprogress inprogress
ATI Radeon 9100 QM (AGP) (ChipID = 0x514d)
Reinout van Schouwen HW N/A N/A N/A N/A
Pass pass
ATI Radeon Mobility 3470
Andrey Batyiev HW N/A
Warning warn
[1]
N/A
Warning warn
[2]
Warning warn
[3]
ATI Radeon 9200 (AGP), liveCD
  1. Fonts are broken
  2. Fonts are broken: [8], very slow 9-12 fps
    • fbo_firecube: Error: unable to get usable FBO combination!
    • gloss: show only empty black window
    • multiarb: every output to background terminal cause lag of video output for a fraction of second
    • reflect: outputing other from color buffers drops fps down to 9fps
User Smolt Profile Pymol Avogadro OpenArena Tux Racer mesa-demos Comments