It is still under construction and content may change. Do not rely on the information on this page.
Introduction
This guide presumes that you have a new AutoQA test written (preferably according to Writing AutoQA Tests) and you want to verify that it works ok. This article will show you how to do it.
Prerequisites
You must have AutoQA installed. You don't need Autotest server as long as you don't do some multi-hosts tests.
.png){kind=small}
Before validating the new test on your local system, you may want to confirm that the test does not perform destructive operations on the system, or could fail in such a way that would render your local system inoperable. Consider using Virtualization when verifying your test.
Examine the watcher
When you have the test ready, you have already chosen the right event for your test and configured it in control.autoqa file. Now we need to simulate running the event's watcher on AutoQA server to see what commands would be run. We can do that by adding --dry-run (use --help to see more of useful options).
Let's say our test uses post-koji-build event, which announces every package built and tagged with dist-fX-updates-candidate tag in Koji. So we would run:
# /usr/share/autoqa/post-koji-build/watch-koji-builds.py --dry-run No previous run - checking builds in the past 3 hours autoqa post-koji-build --kojitag dist-f12-updates-candidate --arch x86_64 --arch i686 espeak-1.42.04-1.fc12 autoqa post-koji-build --kojitag dist-f11-updates-candidate --arch x86_64 kdemultimedia-4.3.4-1.fc11 autoqa post-koji-build --kojitag dist-f11-updates-candidate --arch x86_64 kdeplasma-addons-4.3.4-1.fc11 autoqa post-koji-build --kojitag dist-f12-updates-candidate --arch x86_64 --arch i686 cryptopp-5.6.1-0.1.svn479.fc12 autoqa post-koji-build --kojitag dist-f12-updates-candidate --arch x86_64 drupal-6.15-1.fc12 autoqa post-koji-build --kojitag dist-f12-updates-candidate --arch x86_64 --arch i686 seamonkey-2.0.1-1.fc12 ... output trimmed ...
For every line, all tests from post-koji-build event (specified in testlist file) would be run on all the architectures specified by --arch option. For our purposes we will pick one command, let's say the first one.
Examine the control file
We will now try what would happen if the chosen command would be actually run. By appending --dry-run option to the command the autoqa harness will prepare everything needed for autotest harness and print what would be run, but not execute it. Let's see what happens:
# autoqa post-koji-build --kojitag dist-f12-updates-candidate --arch x86_64 --arch i686 espeak-1.42.04-1.fc12 --dry-run /usr/share/autotest/client/bin/autotest --verbose -t post-koji-build:rpmlint.x86_64 /tmp/autoqa-control.y_ODy7 keeping /tmp/autoqa-control.y_ODy7 at user request /usr/share/autotest/client/bin/autotest --verbose -t post-koji-build:rpmguard.x86_64 /tmp/autoqa-control.rjzqJ_ keeping /tmp/autoqa-control.rjzqJ_ at user request
There are two lines saying that autotest would be run with a particular control file. There are two of them because two tests would be executed. Those control files were kept on disk for our examination. Pick one of them and display it. You should see something like this:
# -*- coding: utf-8 -*-
autoqa_conf = '''
... output trimmed ...
'''
autoqa_args = {'event': 'post-koji-build', 'kojitag': 'dist-f12-updates-candidate', 'nvr': 'espeak-1.42.04-1.fc12', 'name': 'espeak'}
... output trimmed ...
job.run_test('rpmlint', config=autoqa_conf, **autoqa_args)
It's almost the same config file that you created, but on top some more data are added. The autoqa_conf line is your configuration file from /etc/autoqa.conf. After that there are some other properties in the autoqa_args dictionary (event, kojitag, nvr and name in this case) that were set by the event according to the command line. At the end you finally see how your test object will be invoked.
You now have the final control file, so you can easily check if all the arguments of job.run_test method are correctly set and whether your test will be correctly executed.
If everything looks fine, we can continue on actually running the test.
Run just your test
Now we will run our test for real. But we don't want to run all tests of that post-koji-build event on it, just our one. Suppose we are writing test named rpmlint (already present in the AutoQA by the way). We will modify the command to look like this:
# autoqa post-koji-build --kojitag dist-f12-updates-candidate --arch x86_64 --arch i686 espeak-1.42.04-1.fc12 --test rpmlint
If you don't have autotest-server installed and configured, you will also need to append --local option or set local = true in /etc/autoqa.conf to run the test on the local computer.
Let's see the output:
# autoqa post-koji-build --kojitag dist-f12-updates-candidate --arch x86_64 --arch i686 espeak-1.42.04-1.fc12 --test rpmlint --local 16:38:32 INFO | Writing results to /usr/share/autotest/client/results/post-koji-build:rpmlint.noarch ... output trimmed ... 16:38:47 INFO | Test started. Number of iterations: 1 16:38:47 INFO | Executing iteration 1 of 1 16:38:47 INFO | Dropping caches between iterations 16:38:47 DEBUG| Running 'sync' 16:38:48 DEBUG| Running 'echo 3 > /proc/sys/vm/drop_caches' 16:38:48 INFO | ======================================== 16:38:48 INFO | espeak-1.42.04-1.fc12 16:38:48 INFO | ======================================== 16:38:48 INFO | Removing all RPMs from /usr/share/autotest/client/tmp/tmpRvqHlz_rpmlint/rpms 16:38:49 INFO | Saving RPMs to /usr/share/autotest/client/tmp/tmpRvqHlz_rpmlint/rpms 16:38:49 INFO | Grabbing http://koji.fedoraproject.org/packages/espeak/1.42.04/1.fc12/i686/espeak-devel-1.42.04-1.fc12.i686.rpm 16:38:51 INFO | Grabbing http://koji.fedoraproject.org/packages/espeak/1.42.04/1.fc12/i686/espeak-1.42.04-1.fc12.i686.rpm ... output trimmed ... 16:39:04 INFO | Grabbing http://koji.fedoraproject.org/packages/espeak/1.42.04/1.fc12/src/espeak-1.42.04-1.fc12.src.rpm 16:39:06 DEBUG| Running 'rpmlint /usr/share/autotest/client/tmp/tmpRvqHlz_rpmlint/rpms 2>&1' 16:39:08 DEBUG| [stdout] espeak.ppc64: W: spelling-error %description -l en_US stdin -> stein, stain, stdio 16:39:09 DEBUG| [stdout] espeak.ppc64: W: shared-lib-calls-exit /usr/lib64/libespeak.so.1.1.42 exit@GLIBC_2.3 16:39:10 DEBUG| [stdout] espeak.ppc: W: spelling-error %description -l en_US stdin -> stein, stain, stdio 16:39:10 DEBUG| [stdout] espeak.ppc: W: shared-lib-calls-exit /usr/lib/libespeak.so.1.1.42 exit@GLIBC_2.0 16:39:11 DEBUG| [stdout] espeak-devel.ppc: W: no-documentation 16:39:11 DEBUG| [stdout] espeak.i686: W: spelling-error %description -l en_US stdin -> stein, stain, stdio 16:39:12 DEBUG| [stdout] espeak.i686: W: shared-lib-calls-exit /usr/lib/libespeak.so.1.1.42 exit@GLIBC_2.0 16:39:13 DEBUG| [stdout] espeak-devel.ppc64: W: no-documentation 16:39:13 DEBUG| [stdout] espeak-devel.x86_64: W: no-documentation 16:39:14 DEBUG| [stdout] espeak-devel.i686: W: no-documentation 16:39:14 DEBUG| [stdout] espeak.src: W: spelling-error %description -l en_US stdin -> stein, stain, stdio 16:39:17 DEBUG| [stdout] espeak.src:48: W: macro-in-comment %patch2 16:39:17 DEBUG| [stdout] espeak.src:70: W: deprecated-grep [u'egrep'] 16:39:19 DEBUG| [stdout] espeak.x86_64: W: spelling-error %description -l en_US stdin -> stein, stain, stdio 16:39:20 DEBUG| [stdout] espeak.x86_64: W: shared-lib-calls-exit /usr/lib64/libespeak.so.1.1.42 exit@GLIBC_2.2.5 16:39:20 DEBUG| [stdout] 9 packages and 0 specfiles checked; 0 errors, 15 warnings. 16:39:20 INFO | **************************************** 16:39:20 INFO | * RESULT: INFO 16:39:20 INFO | * SUMMARY: rpmlint: INFO; 0 errors, 15 warnings for espeak-1.42.04-1.fc12 16:39:20 INFO | * HIGHLIGHTS: 0 lines 16:39:20 INFO | * OUTPUTS: 19 lines 16:39:20 INFO | * EMAIL RECIPIENTS: 16:39:20 INFO | **************************************** 16:39:20 INFO | Test finished after 1 iterations. ... output trimmed ... 16:39:21 INFO | END GOOD ---- ---- timestamp=1299512361 localtime=Mar 07 16:39:21 ... output trimmed ...
You can see that the test went well and you can see rpmlint's output there. You can also find all the output logged at /usr/share/autotest/client/results/post-koji-build:rpmlint.noarch (in this case). The most important results that you have written in self.results in the test object are available in the same directory as rpmlint/results/output.log (in this case).
In case there was some problem in your test the exception in the output should guide you where to look for source of the problem.
Test thoroughly
Now that you verified that your test works ok under one event (e.g. new package built), you should verify that one more events. Just go through the list of commands the watcher gave you and try one command after another. Still everything works ok? Then you test may be ready for publishing in AutoQA upstream, congratulations :)
Remarks
Init scripts
When you execute your test using 
autotest
16:38:32 DEBUG| Running 'ln -sf /usr/share/autotest/client/tools/autotest /etc/init.d/autotest' 16:38:32 DEBUG| Running 'ln -sf /usr/share/autotest/client/tools/autotest /etc/rc3.d/S99autotest'
You might be interested in this information particularly when testing on bare metal. You don't have to be concerned though. The purpose of this script is to continue execution of previously stopped test, eg. when some test requires computer reboot. In that case a file control.state exists and autotest will continue with test execution. In other (the majority) of cases, this script will just do nothing.