From Fedora Project Wiki
Upgrading F17 Images to 3.7 Kernel
F17 GA
Starting with the F17 GA image, yum updated 2013-02-14.
kernel-3.7.3-101.fc17
| Hardware | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | n/a | The install failure resulted on a fully updated F17 system. The boot failure occurred on a F17 GA system, there was no install error, but the kernel did not boot (using qemu-system-arm-1.2.2-6.fc18.x86_64). DTB used for boot test (required). | ||||
| Pandaboard |  |
|
|
|
||
| Trimslice Bare/Value Pro | U-Boot 2012.04.01-1.01 |
Kernel test booted on F18 rootfs successfully. The Trimslice needs a Uboot upgrade to U-Boot 2012.04.01-1.01, a new boot script that changes the load address for the initramfs and a dtb. | ||||
| Trimslice Pro/H/H250 | ||||||
| Highbank | ||||||
| Beagleboard XM | ||||||
| Kirkwood | Tested on GuruPlug Server Plus |
kernel-3.7.9-101.fc17
| Hardware | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|
| Versatile Express (Qemu) |  |
Disk Image | n/a | fpaste of boot, using qemu-system-arm-1.2.2-6.fc18.x86_64 with DTB. | ||
| Pandaboard | |
SD | |
|
|
Boots with no additional configuration. |
| Trimslice Bare/Value Pro | |
SD | |
|
|
The Trimslice needs a Uboot upgrade to U-Boot 2012.04.01-1.01, a new boot script that changes the load address for the initramfs and a dtb. |
| Trimslice Pro/H/H250 | |
SATA | |
|
|
The Trimslice needs a Uboot upgrade to U-Boot 2012.04.01-1.01, a new boot script that changes the load address for the initramfs and a dtb. |
| Highbank |  |
|
|
|
N/A | Kernel crash after short period of use - Backtrace |
| Beagleboard XM |
kernel-3.8.3-102.fc17
| Hardware | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | |
|
|
|
Not tested. | Division by zero in kernel on f18 QEMU, all working on F19 QEMU - qemu-system-arm-1.4.0-5.fc19 . |
| Pandaboard | |
|
|
|
|
|
| Trimslice Bare/Value Pro | |
|
|
|
N/A | Did not replace running kernel. |
| Trimslice Pro/H/H250 | |
|
|
|
N/A | Tested using USB flash drive. Did not replace running kernel. |
| Highbank | |
|
|
N/A | N/A | System did not fully reboot, needed power reset. |
| Beagleboard XM |