2012-10-11 Power Management

Fedora Test Days

Power Management

Date	2012-10-11
Time	all day

Website	QA/Fedora_18_test_days
IRC	#fedora-test-day (webirc)
Mailing list	test

Can't make the date?
If you come to this page after the test day is completed, your testing is still valuable, and you can use the information on this page to test, file any bugs you find at Bugzilla, and add your results to the results section. If this page is more than a month old when you arrive here, please check the current schedule and see if a similar but more recent Test Day is planned or has already happened.

On site event
You can attend this event online or personally in Red Hat Brno office

What to test?

Today's instalment of Fedora Test Day will focus on Power Management

Who's available

The following cast of characters will be available for testing, workarounds, bug fixes, and general discussion ...

Development - Jaroslav Škarvada (jskarvad) / PowerManagement SIG
Quality Assurance - Jan Ščotka (jscotka)

Note: jskarvad will be available at least during 10:00 - 22:00 (UTC+2) on #fedora-test-day, #fedora-power, #fedora-devel, otherwise he will be on e-mail with non guaranteed response time. He will be also available on site in Red Hat Brno office during 13:00 - 19:00, Visitors room, 4th floor (in the front of reception desk).

Prerequisite for Test Day

The 32 bit live medium (SHA-1: e003ad7e7bcac9cc018ee2e0cee5977a4779b59d) or 64 bit live medium (SHA-1: f63f4faebdd0b3398ba6755d681d7e630efba091) or an updated Fedora 18 pre-release or you may get nightly composed LiveCD.
- It is possible to convert the LiveCD into LiveUSB by following the How_to_create_and_use_Live_USB instructions. If you convert the LiveCD into LiveUSB it is recommended to create on USB another primary partition that will serve as swap. This is useful for pm-hibernate test case.
- If you attend the event on-site in Red Hat Brno office, there will be prepared bootable USB flash disks/CD ROMs, thus you only need to bring your hardware there. (13.00-17.00 CEST)
Your hardware profile uploaded to Smolt according to these instructions
- In case you have dependency problem with smolt package use the workaround bellow:

 yum install --nogpgcheck "http://fedorapeople.org/~jskarvad/pm-test-day-repo/smolt-1.4.3-6.fc18.noarch.rpm"

Optional: account on fedoraproject.org if you plan to upload the pm-utils bugreport file. If you do not have one and you do not plan to get it, you can still attend the test day - there are instructions in the appropriate test case(s) bellow how to handle such situation.

Typing convetions

In the following text commands that needs to be run as root are prefixed by #, e.g.:

# id

means to run id command under the root account. Commands prefixed by $ do not need to be run under the root account.

How to test?

It is focused especially on suspend, hibernate, power-consumption, LCD brightness control and tuned. Some test cases are only for laptop users and it is noted in the test case description field. If you do not have laptop just skip them. You can also skip other test cases (e.g. if you do not have enough time). In this case just leave the columns for skipped test cases blank. Please note that your report will be still valuable even if you do not finish all test cases. The procedure:

Run test cases bellow.

Prepare your system

PM Test Day Live medium
If you are using our PM Test Day Live medium, please skip the following steps, because everything is already prepared for you.

Install the public key (in case you would like to verify the PM Test Day support package, otherwise you can skip this step because the public key will be installed automatically with the PM Test Day support package in the next step):
```
# rpm --import http://jskarvad.fedorapeople.org/RPM-GPG-KEY-pm-test-day
```
Install the PM Test Day support package by:
```
# yum install http://jskarvad.fedorapeople.org/pm-test-day-repo/pm-test-day-4-1.fc18.noarch.rpm
```
- This procedure will also install the public key which will be then used for verification of packages from the PM Test Day repo.
- In case you have dependency problem with smolt package use the workaround bellow:
```
 yum install --nogpgcheck "http://fedorapeople.org/~jskarvad/pm-test-day-repo/smolt-1.4.3-6.fc18.noarch.rpm"
```

Make sure you have all current updates (and temporal fixes) installed by:

# yum update

Clear your audit log (especially important in case you aren't running from the live medium):

# echo -n > /var/log/audit/audit.log

Known Bugs / Workarounds

RHBZ #862801 - Anaconda hangs when 'Configuring installed system'
You can encounter this when doing liveinst from the live media, current workaround: 'pkill anaconda'.

Problem with screen locking:
Screen locking is disabled on live medium, to enable:
- Set password for liveuser:
```
# passwd liveuser
```
- Enable the locking feature:
```
$ gsettings set org.gnome.desktop.lockdown disable-lock-screen 'false'
```
- Enable the lock in gnome-control-center:
```
$ gnome-control-center screen
```
The desktop locking is task of gnome-settings-daemon/UPower not pm-utils (pm-suspend*, pm-hibernate). Pm-utils is backend for UPower and knows nothing about desktop locking. To lock your desktop you need to suspend/hibernate from gnome-shell UI.

Problem with hibernation from gnome-shell
- AFAIK currently it is not possible to hibernate from gnome-shell UI without tweaking (please don't ask me why, I am not Gnome developer), you can invoke the full hibernation (including desktop locking if set, see above) by the following dbus call:
```
$ dbus-send --print-reply --system --dest=org.freedesktop.UPower /org/freedesktop/UPower org.freedesktop.UPower.Hibernate
```
  Or with gnome-shell 3.6:
```
# dbus-send --print-reply --system --dest=org.freedesktop.login1 /org/freedesktop/login1 org.freedesktop.login1.Manager.Hibernate boolean:false
```
RHBZ #859224 - Please take systemd-logind's handle-power-key/handle-suspend-key/handle-hibernate-key/handle-lid-switch inhibitor locks if GNOME wants to handle the respective keys on its own
Double suspend problem.

Test Cases

Testcase	Description	Target	Approx. time required
pm-suspend	Tests suspend / resume via pm-utils.	All	2 minutes
pm-hibernate	Tests hibernate / resume via pm-utils.	All	2 minutes
pm-suspend-hybrid	Tests hybrid suspend (AKA suspend to both) / resume via pm-utils.	All	2 minutes
pm-powersave	Tests detection of AC / battery (upower functionality) and pm-powersave reactions to power source changes (pm-utils).	Laptops	1 minutes
Lid close	Tests system reaction to lid close.	Laptops	1 minutes
Backlight control	Tests LCD backlight control.	Laptops	1 minute
Tuned	Tests tuned-adm (tuned) basic functionality.	All	5 minutes
Tuned disabled idle	Measures power consumption of machine in active idle with tuned disabled.	Laptops or users with wattmeter	15 minutes
Tuned powersave idle	Measures power consumption of machine in active idle with tuned laptop-battery-powersave profile.	Laptops or users with wattmeter	15 minutes
Selinux AVCs	Tests if there are no SELinux AVCs during profile switching.	All	1 minutes

Test Results

If you have problems with any of the tests, report a bug to Bugzilla usually for the component pm-utils, selinux-policy, kernel, or tuned. If you are reporting suspend/hibernate problem, please also attach output from dmesg and pm-utils-bugreport-info.sh. If you are unsure about exactly how to file the report or what other information to include, just ask on IRC and we will help you. Once you have completed the tests, add your results to the Results table below following the example results from the first line. The first column should be your name with a link to your Fedora User Wiki page (if you have one), and the second should be a link to the Smolt profile of the system you tested. For each test case, use the result template to enter your result, as shown in the example result line.

User	Smolt Profile	pm-suspend	pm-hibernate	pm-suspend-hybrid	pm-powersave	Lid close	Backlight control	Tuned	Tuned disabled idle	Tuned powersave idle	Selinux AVCs	References
Sample User	Sample Machine	fail ^[1]	fail	pass	warn ^[2]	pass	inprogress	fail ^[3]	4.800 Wh	4.710 Wh	pass	↑ RHBZ #54321 ↑ Got report but also encountered RHBZ #54320 ↑ RHBZ #864911
Abhay	Dell Inspiron N5010 A15	fail ^[1]	fail ^[2]		pass	warn ^[3]	pass	warn ^[4] ^[5]			pass	↑ RHBZ #865414 ↑ resume doesn't work. RHBZ #865457 ↑ network connection couldn't re-establish. RHBZ #865414 ↑ AVC denial notification while starting the tuned service. RHBZ #865443 ↑ powertop2tuned crashes whilst generating profiles. RHBZ #865655
pschindl	Lenovo ThinkPad T520	pass	pass	pass	pass	warn ^[1]	pass	pass	4910 Wh	5035 Wh	fail ^[2]	↑ RHBZ #865362 works with gnome-settings-daemon-3.6.1-2 ↑ RHBZ #865387
vhumpa	Lenovo ThinkPad T420	pass	pass	pass	pass	pass	pass	pass	8.821 Wh, 11.446 V (KDE)	8.676 Wh, 10.758 V (KDE)	pass
lzachar	Dell Inspiron 1525	pass	pass ^[1]	pass	pass	warn ^[2]	pass	pass	bat: 3.984 Wh, ac: 4.354 Wh ^[3]	inprogress bat: 4.149 Wh, ac: xxxx	fail ^[4]	↑ on swap<memory & luks & lvm ↑ RHBZ #865362 ↑ RHBZ #865468 screen blank after 9 min ↑ RHBZ #865387
lzachar	lenovo T410	pass	pass	pass	pass	pass ^[1]	pass	pass	bat: 3.390 Wh	bat: 3.410 Wh	fail ^[2]	↑ works with gnome-settings-daemon-3.6.1-2 ↑ RHBZ #865387
csm	Lenovo ThinkCentre M58p	warn ^[1]	fail ^[2]	fail ^[3]	N/A	N/A	N/A	pass	N/A	N/A	pass	↑ 1. Suspend okay, 2. one too, but after 2. wakeup screen remains black, doesn't wakeup ↑ Resume doesn't work ↑ Szstem doesn't reach hibernation state, instead seems to resume immediately
psklenar	Lenovo T410	warn ^[1] ^[2]	pass	pass	pass	pass	pass	pass	inprogress bat: 4.405 ^[3]	inprogress bat: 4.501	inprogress	↑ anaconda bug RHBZ #865322 ↑ pm-utils bug RHBZ #865410 ↑ 1. liveCD turns with CD randomly
dapospis	Lenovo T520	fail ^[1]	pass	pass	pass	fail ^[2]	pass	pass ^[3]	6.463 Wh (12.453 V)	6.597 Wh (12.083 V)	pass	↑ https://bugzilla.redhat.com/show_bug.cgi?id=865466 ↑ bug 859224 ↑ bug https://bugzilla.redhat.com/show_bug.cgi?id=865477
dapospis	HP Mini 5103 ^[1]	pass	pass	pass	pass	fail ^[2]	pass	fail ^[3]	3.325 Wh (12.503 V)	3.199 Wh (12.119 V)	pass	↑ booted with processor.ignore_ppc=1 due to problem with cpu scaling ↑ double suspend problem ↑ AVC after first tuned service start, path to the profile, see. bug 865477
jpospisi	HP Compaq 6715b ^[1]	pass	pass	fail ^[2]	pass	warn ^[3]	pass	pass	6.034 Wh (11.718 V)	6.509 Wh (11.340 V)	fail ^[4]	↑ Also encountered RHBZ #865844 and RHBZ #865848. ↑ RHBZ #865844 ↑ RHBZ #865362 ↑ RHBZ #865387
Sgf	Lenovo IdeaPad S12 ION	warn ^[1]	pass	pass	pass	fail ^[2]	pass	pass	5.130 Wh	5.030 Wh	pass	↑ RHBZ #791149 - there is workaround mentioned in the bug comments, so I continued with that ↑ RHBZ #865362
sagitter	Acer Aspire 6930G	pass		pass	pass	pass	pass	pass ^[1]	pass 5.552 Wh (10.457 V)	pass 5.760 Wh (10.342 V) ^[2]	pass ^[3]	↑ RHBZ #865443 ↑ RHBZ #865443 ↑ RHBZ #865443
Eric Blake	Lenovo ThinkStation D20 ^[1]	fail ^[2]	fail ^[3]	fail ^[4]				pass ^[5]			pass	↑ most of my testing was done bare-metal running rawhide rather than F18, but I also tested pm-suspend with the F18 liveusb test image ↑ RHBZ #679631 machine whirs up after pressing power button to resume, and even shows last screen, but remains unresponsive, if hard disk is present; but if disk is pulled while I use liveusb image, it works ↑ RHBZ #865597 machine sort of recovered, but I/O errors prevented doing anything useful ↑ same failure as pm-suspend on first power-on; then hard power cycle triggered hibenation recovery on second power-on with same failure as pm-hibernate; next hard power cycle (third power-on) booted fresh ↑ 'pgrep tuned' had false positive on ksmtuned process, unrelated to tuned
User:Evillagr	HP dv5-1132la	pass	pass ^[1]	pass	pass	warn ^[2]	pass	N/A	N/A	N/A	fail ^[3]	↑ Swap on LVM ↑ RHBZ #865362 ↑ RHBZ #865443
User:Adabeda	ThinkPad R500	pass	none	none	pass	warn ^[1]	pass	pass	6.210 Wh	6.160 Wh	none	↑ RHBZ #865362
User:Adabeda	ThinkPad 420	pass	none	none	pass	warn ^[1]	pass	pass	10.977W/2.744Wh ^[2]	11.074W/2.768Wh ^[3]	none	↑ RHBZ #865362 ↑ External power meter was used. ↑ External power meter was used.
User:hhorak	[ThinkPad Edge 11.6 U5400]	pass	pass	pass	pass	warn ^[1]	pass	warn ^[2]	warn 3.820 Wh ^[3]	warn 3.810 Wh ^[4]	fail ^[5]	↑ RHBZ #865362 ↑ RHBZ #864911 ↑ RHBZ #866367 ↑ RHBZ #866367 ↑ RHBZ #864911
Jaroslav Škarvada	Lenovo T420s	warn ^[1]	pass	warn ^[2]	pass	warn ^[3]	pass	pass ^[4]	4.543 Wh (11.833 V) 3.786 Wh (12.135 V)^[5]	4.655 Wh (12.061 V) ^[6] 3.682 Wh (12.155 V) ^[7]	pass	↑ RHBZ #865466 ↑ RHBZ #866487 ↑ RHBZ #859224 ↑ RHBZ #866919 ↑ Re-measured with HDD installed F18. ↑ RHBZ #866918 ↑ Re-measured with fixed tuned and HDD installed F18.
Jaroslav Škarvada	Lenovo T500	pass	pass	pass	pass	pass	pass	pass	4.920 Wh	4.650 Wh	pass
Jaroslav Škarvada	Asus 1000H	pass	warn ^[1]	pass	pass	pass	pass	pass	2.341 Wh (7.804 V)	2.250 Wh (7.604 V)	pass	↑ RHBZ #865466
Jaroslav Škarvada	Dell Latitude D620	pass	fail ^[1]	pass	N/A ^[2]	pass	pass	pass	N/A	N/A	fail ^[3] ^[4]	↑ RHBZ #867006 ↑ Dead battery ↑ RHBZ #883928 ↑ Also encountered some AVCs on spindown-disk profile, but we are going to fix this upstream in the next tuned update (this is minor as the profile is phasing out in the compat sub-package)
Jaroslav Škarvada	Gigabyte M56S-S3	pass	pass	warn ^[1]	N/A ^[2]	N/A	N/A	pass	N/A	N/A	pass ^[3]	↑ Machine performed full hibernation ↑ Desktop. ↑ RHBZ #864911
Jaroslav Škarvada	Lenovo X201	pass	pass	pass	pass	pass	pass	pass	3.248 Wh (12.543 V)	3.530 Wh (12.430 V)	pass
Jaroslav Škarvada	P4X266E-8233	pass ^[1]	fail ^[2]	warn ^[3]	N/A	N/A	N/A	pass	N/A	N/A	fail ^[4]	↑ Firmware doesn't seem to support suspend, only standby, so the machine standby ↑ RHBZ #867006 ↑ The machine hibernates ↑ RHBZ #883928
mkyral	[Asus K50IJ (Pent T4200, 4GB, graf. Intel GMA4500MHD]	pass	fail ^[1]	pass ^[2]	pass	pass	pass	pass ^[3]	bat: 3.355 Wh ^[4]	bat: 3.333 Wh ^[5]	fail ^[6]	↑ after resume screen flickers RHBZ #867460 ↑ resuming from RAM ↑ RHBZ #865443 ↑ RHBZ #865468 ↑ RHBZ #865468 ↑ RHBZ #865443
Martix	Thinkpad T520	pass	pass	pass	pass			pass ^[1]	4.169 Wh^[2]	4.053 Wh^[3]4.250^[4]		↑ except AVC denial ↑ 15 min ↑ 5 min test with powertop tunables all good ↑ 5 min powersave
jskladan	[ Mac Mini]	pass	pass					pass			pass
JiriEischmann	ExoPC	pass	warn ^[1]		pass		pass	pass ^[2]^[3]	2.796 Wh (7.098 V)^[4]	2.777 Wh (7.013 V)	pass	↑ The system woke up after hibernation, but touch screen didn't work, X server restart needed. No improvement since F17. ↑ RHBZ #865443 ↑ SELinux didn't like starting Tuned service via systemd. ↑ Both results are higher and the difference is much smaller than in F17.
lzachar	Dell Inspiron 1525	pass	pass ^[1] pass ^[2]	pass ^[3]	pass	warn ^[4]	pass					↑ swap<memory & lvm & live-cd & luks ↑ swap<memory & livecd & lvm in luks => passed ↑ tested both suspend, hibernate on power cut. ↑ RHBZ #865362
MartinK	Lenovo T520 42404GG	pass	pass	pass	pass	fail ^[1]	pass	pass				↑ Suspends correctly after closing the laptop lid. After opening the lid, system successfully resumes to the GUI but then immediately suspends again. Pressing the power button afterwards resumes the system correctly. (reportedly caused by a bug in gsettings ?)
MartinK	Lenovo T520 42404GG using nvidia graphics								7.911^[1]	8^[2]	pass	↑ using the Nvidia discreet GPU wifi OFF, screen ON ↑ using the Nvidia discreet GPU wifi OFF, screen ON
pbabinca	Lenovo ThinkPad R61	pass	pass	pass
luya	[ Toshiba Satellite C650D]	pass	pass	pass		pass	warn ^[1]					↑ Setting Brightness to min does not totally darken the screen.
evillagr	HP dv5-1132la	pass
pschindl	desktop with AMD	pass	pass	pass				pass
iiska	[01965NG ThinkPad Edge]	pass	pass ^[1]	pass	pass	fail ^[2]	pass	pass	2.96	2.97	warn ^[3]	↑ Using swap partition in same the usb stick than livecd image. ↑ https://bugzilla.redhat.com/show_bug.cgi?id=865362 ↑ Following avc erors/messages are displayed when pmtd-selinux-test is run immediately after systemctl start tuned.service. If test script pmtd-selinux-test is run again there are no AVC matches. [root@localhost liveuser]# pmtd-selinux-test AVCs: ---- type=SYSCALL msg=audit(10/11/2012 07:35:39.207:517) : arch=x86_64 syscall=connect success=no exit=-13(Permission denied) a0=0x7 a1=0x7f6c94ee8390 a2=0x21 a3=0x6e75722f7261762f items=0 ppid=1 pid=6187 auid=unset uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=(none) ses=unset comm=tuned exe=/usr/bin/python2.7 subj=system_u:system_r:tuned_t:s0 key=(null) type=AVC msg=audit(10/11/2012 07:35:39.207:517) : avc: denied { search } for pid=6187 comm=tuned name=dbus dev="tmpfs" ino=13925 scontext=system_u:system_r:tuned_t:s0 tcontext=system_u:object_r:system_dbusd_var_run_t:s0 tclass=dir
bblaskov	[Bochs ] ^[1]		pass	pass				pass			pass	↑ I am really surprised that there is NO WAY how to hibernate in Gnome3 with password prompt after booting again. There is no "clickable" action and after pm-hibernate it doesn't prompt for password.
mysho	[41786NG ThinkPad T420] ^[1]	pass	pass	pass	pass	fail ^[2]	pass	fail			fail	↑ better than fedora 17 :D ↑ lid-close suspends, but i have to wake up manually
staffe	[Aspire 7730G Not Applicable] ^[1]	pass	^[2]	pass	pass	pass ^[3]	fail ^[4]	fail ^[5]	5.655 Wh	6.540 Wh	pass	↑ In every Fedora release, automatic suspend (after x minutes) didn't work properly. Sometimes it worked, sometimes it didn't. However the script on the following page fixed this issue for me (translated from german to english with google translate: http://translate.google.com/translate?sl=de&tl=en&js=n&prev=_t&hl=de&ie=UTF-8&layout=2&eotf=1&u=http%3A%2F%2Flinuxundich.de%2Fde%2Fhardware%2Fstandbysuspend-unter-linux-bei-vielen-notebooks-und-mainboards-reparieren%2F&act=url Original: http://linuxundich.de/de/hardware/standbysuspend-unter-linux-bei-vielen-notebooks-und-mainboards-reparieren/ I don't know what the script exactly does, but you may have a look at it, if you want. ↑ skipped ↑ Desktop doesn't get locked / promt for password - but thats ok i guess cause i'm on a live system... ↑ - System starts with lowest brightness level - I always have to adjust after start (to max brightness). - Bluetooth automatically starts after boot. If I turn off bluetooth via laptopbutton the backlight brightness increases for some reason. The bluetooth button acts like backlight control key 'up' but only when turning bluetooth off. When turning bluetooth on, all is normal. - The backlight control keys itself work as they should. ↑ Result 1 > Passed Result 2: tuned.service is still running after doing a 'systemctl stop tuned.service' Console-Log: [root@localhost liveuser]# systemctl stop tuned.service [root@localhost liveuser]# pgrep tuned 640 [root@localhost liveuser]#
plautrba	[3680B56 ThinkPad X201]	pass	pass	pass	pass	pass	pass				pass
jmarko	Unknown	pass	pass	pass	fail ^[1]	fail ^[2]	pass	pass	^[3]	^[4]	pass ^[5]	↑ Only the led and status bar icon was changing. No reaction in terminal ↑ Fail to return when 2 lcds connected https://picasaweb.google.com/106948465206430639830/PmTestDay?authuser=0&authkey=Gv1sRgCL3M0YbP54jcuwE&feat=directlink ↑ No finished because LCD was always turning off ↑ No finished because LCD was always turning off ↑ pmtd-selinux-test AVCs: ---- type=SYSCALL msg=audit(10/11/2012 11:45:35.738:309) : arch=x86_64 syscall=connect success=no exit=-13(Permission denied) a0=0x7 a1=0x7f19d797c390 a2=0x21 a3=0x6e75722f7261762f items=0 ppid=1 pid=2097 auid=unset uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=(none) ses=unset comm=tuned exe=/usr/bin/python2.7 subj=system_u:system_r:tuned_t:s0 key=(null) type=AVC msg=audit(10/11/2012 11:45:35.738:309) : avc: denied { search } for pid=2097 comm=tuned name=dbus dev="tmpfs" ino=14446 scontext=system_u:system_r:tuned_t:s0 tcontext=system_u:object_r:system_dbusd_var_run_t:s0 tclass=dir type=USER_AVC msg=audit(10/11/2012 11:49:18.533:312) : pid=1 uid=root auid=unset ses=unset subj=system_u:system_r:init_t:s0 msg='avc: denied { status } for auid=liveuser uid=liveuser gid=liveuser path=/usr/lib/systemd/system/crond.service cmdline="systemctl stop crond.service" scontext=system_u:system_r:system_dbusd_t:s0 tcontext=system_u:object_r:crond_unit_file_t:s0 tclass=service exe=/usr/lib/systemd/systemd sauid=root hostname=? addr=? terminal=?' type=SYSCALL msg=audit(10/11/2012 12:12:48.187:315) : arch=x86_64 syscall=connect success=no exit=-13(Permission denied) a0=0x7 a1=0x7f975d50a390 a2=0x21 a3=0x6e75722f7261762f items=0 ppid=3234 pid=3236 auid=unset uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=(none) ses=unset comm=tuned exe=/usr/bin/python2.7 subj=system_u:system_r:tuned_t:s0 key=(null) type=AVC msg=audit(10/11/2012 12:12:48.187:315) : avc: denied { search } for pid=3236 comm=tuned name=dbus dev="tmpfs" ino=14446 scontext=system_u:system_r:tuned_t:s0 tcontext=system_u:object_r:system_dbusd_var_run_t:s0 tclass=dir Current active profile: /usr/lib/tuned/balanced/tuned.conf Switching to profile: balanced AVCs: <no matches> Current active profile: /usr/lib/tuned/balanced/tuned.conf Switching to profile: latency-performance AVCs: <no matches> Current active profile: /usr/lib/tuned/latency-performance/tuned.conf Switching to profile: powersave AVCs: <no matches> Current active profile: /usr/lib/tuned/powersave/tuned.conf Switching to profile: throughput-performance AVCs: <no matches> Current active profile: throughput-performance Switching to profile: virtual-guest AVCs: <no matches> Current active profile: virtual-guest Switching to profile: virtual-host AVCs: <no matches>
pbabinca	[7732NEG ThinkPad R61]	pass	pass	pass	pass	pass	^[1]	pass	^[2]	^[3]	pass	↑ Test wasn't run. I have hw problems with backlight on my laptop. ↑ Test wasn't run. I wasn't able to set backlight to maximum due to hw problems. ↑ Test wasn't run. I wasn't able to set backlight to maximum due to hw problems.
liam	Unknown	pass	fail ^[1]	pass	pass ^[2]	pass	fail ^[3]	warn ^[4]	6.995Wh	7.533Wh	pass	↑ acpi error finding sysfs power node The exact wording of error is unknown since it was continually printing to screen but there was at least one slightly different error that made the exact error unreadable. ↑ The terminal correctly reports powerstate change but Gnome Shell did respond to any of the changes. ↑ No response to using keys. Still able to change backlight through /sys/class/backlight. ↑ AVC denial (type=AVC msg=audit(1350010423.641:81): avc: denied { search } for pid=1859 comm="tuned" name="dbus" dev="tmpfs" ino=13881 scontext=system_u:system_r:tuned_t:s0 tcontext=system_u:object_r:system_dbusd_var_run_t:s0 tclass=dir) but tuned still began.
User	Smolt Profile	pm-suspend	pm-hibernate	pm-suspend-hybrid	pm-powersave	Lid close	Backlight control	Tuned	Tuned disabled idle	Tuned powersave idle	Selinux AVCs	References

Previous test day (for reference)

Previous F17 PM Test Day

[bz54321-1] RHBZ #54321

[2] Got report but also encountered RHBZ #54320

[3] RHBZ #864911

[4] RHBZ #865414

[5] resume doesn't work. RHBZ #865457

[6] twork connection couldn't re-establish. RHBZ #865414

[7] AVC denial notification while starting the tuned service. RHBZ #865443

[8] wertop2tuned crashes whilst generating profiles. RHBZ #865655

[9] RHBZ #865362 works with gnome-settings-daemon-3.6.1-2

[10] RHBZ #865387

[11] swap<memory & luks & lvm

[12] RHBZ #865362

[13] RHBZ #865468 screen blank after 9 min

[14] RHBZ #865387

[15] works with gnome-settings-daemon-3.6.1-2

[16] RHBZ #865387

[17] 1. Suspend okay, 2. one too, but after 2. wakeup screen remains black, doesn't wakeup

[18] Resume doesn't work

[19] Szstem doesn't reach hibernation state, instead seems to resume immediately

[20] ug RHBZ #865322

[21] -utils bug RHBZ #865410

[22] 1. liveCD turns with CD randomly

[23] ttps://bugzilla.redhat.com/show_bug.cgi?id=865466

[24] ug 859224

[25] ug https://bugzilla.redhat.com/show_bug.cgi?id=865477

[26] ted with processor.ignore_ppc=1 due to problem with cpu scaling

[27] uble suspend problem

[28] AVC after first tuned service start, path to the profile, see. bug 865477

[29] Also encountered RHBZ #865844 and RHBZ #865848.

[30] RHBZ #865844

[31] RHBZ #865362

[32] RHBZ #865387

[1]

[2]

[3]

[1]

[2]

[3]

[4]

[5]

[1]

[2]

[1]

[2]

[3]

[4]

[1]

[2]

[1]

[2]

[3]

[1]

[2]

[3]

[1]

[2]

[3]

[1]

[2]

[3]

[1]

[2]

[3]

[4]

[1]

[2]

[1]

[2]

[3]

[1]

[2]

[3]

[4]

[5]

[1]

[2]

[3]

[1]

[1]

[2]

[3]

[1]

[2]

[3]

[4]

[5]

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[1]

[1]

[2]

[3]

[4]

[1]

[2]

[3]

[1]

[2]

[3]

[4]

[1]

[2]

[3]

[4]

[5]

[6]

[1]

[2]

[3]

[4]

[1]

[2]

[3]

[4]

[1]

[2]

[3]

[4]

[1]

[1]

[2]

[1]

[1]

[2]

[3]

[1]

[1]

Search

Test Day:2012-10-11 Power Management

Contents