Sharing files with NFSv4 on Fedora 7 (Server -> Multi)
Description
This HowTo explains how to set up the Network File System version 4 on your LAN for multiple shares. It explains, also, how to mount the "exports" on your client.
Applicable to Fedora Versions
Fedora Core 6+ Fedora 7
Requirements
Everything comes preinstalled on an "out-of-the-box" installation of Fedora Core. The following are only services.
Server requirements
nfs rpc.idmapd
These are the client's requirements
nfs nfslock rpc.idmapd
Note: The rpc.nfsd and rpc.rquotad services that are needed are started by the nfs service. Most of them don't need user configuration. rpc.lockd, rpc.statd and rpc.mountd are not used by NFSv4.
Doing the Work
Configuring the server
Open up the necessary port on the firewall (port: 2049). Activate the "Security Level and Firewall" tool. You will be asked for your root password. Please enter it: su -c "system-config-securitylevel" Activate "NFS4" and click "OK". Edit /etc/idmapd.conf. Enter your root password when prompted: su -c "gedit /etc/idmapd.conf" Configure your domain name and change the users to nfsnobody: [General] Domain = example.com
[Mapping] Nobody-User = nfsnobody Nobody-Group = nfsnobody Start the rpcidmapd and nfslock services, then start the nfs service. Alternatively, you can use System->Administration->Services or System->Administration->Server Settings->Services GUIs. Please enter the root password when prompted: su -c "/sbin/service rpcidmapd start" su -c "/sbin/service nfslock start" su -c "/sbin/service nfs start" Set rpcidmapd, nfslock, and nfs services to start on boot.Alternatively, you can use System->Administration->Services or System->Administration->Server Settings->Services GUIs. Please enter the root password when prompted: su -c "/sbin/chkconfig --level 345 rpcidmapd on" su -c "/sbin/chkconfig --level 345 nfslock on" su -c "/sbin/chkconfig --level 345 nfs on" Create the dirs of the exports inside "/nfs4exports". Enter your root password when prompted: su -c "mkdir -p /nfs4exports/{share1,share2,share3}" Edit /etc/fstab: su -c "gedit /etc/fstab" Bind the desired shares to the, recently created, dirs at /nfs4exports: /path/to/share1 /nfs4exports/share1 none bind 0 0 /path/to/share2 /nfs4exports/share2 none bind 0 0 /path/to/share3 /nfs4exports/share3 none bind 0 0 Remount everything. Enter your root password when prompted: su -c "mount -a" Edit /etc/exports. Enter your root password when prompted: su -c "gedit /etc/exports" Add your shares here (available to your home network) If you want your shares to be read only, change "rw" to "ro" from these statements: /nfs4exports 192.168.1.0/255.255.255.0(rw,insecure,no_subtree_check,nohide,fsid=0) /nfs4exports/share1 192.168.1.0/255.255.255.0(rw,insecure,no_subtree_check,nohide) /nfs4exports/share2 192.168.1.0/255.255.255.0(rw,insecure,no_subtree_check,nohide) /nfs4exports/share3 192.168.1.0/255.255.255.0(rw,insecure,no_subtree_check,nohide) Reload your exports. Please enter your root password when prompted: su -c "/usr/sbin/exportfs -rv" Edit your /etc/hosts.allow file, so your clients are allowed to access your nfs. Please enter your root password when prompted: su -c "gedit /etc/hosts.allow" Allow your LAN to access your services: ALL: 192.168.1.0/255.255.255.0 Reboot: su -c "/sbin/shutdown -r now" Configuring the clients:
Edit /etc/idmapd.conf. Enter your root password when prompted: su -c "gedit /etc/idmapd.conf" Configure your domain name and change the users to nfsnobody: [General] Domain = example.com
[Mapping] Nobody-User = nfsnobody Nobody-Group = nfsnobody Edit /etc/fstab. Please enter your root password when prompted: su -c "gedit /etc/fstab" Create the mounting dirs: su -c "mkdir /mnt/shares /home/me/share1 /home/he/share2 /home/it/share3" Add the desired shares: <ip-address-to-server>:/ /mnt/shares nfs4 rsize=8192,wsize=8192,timeo=14,intr <ip-address-to-server>:/ /home/me/share1 nfs4 rsize=8192,wsize=8192,timeo=14,intr <ip-address-to-server>:/ /home/he/share2 nfs4 rsize=8192,wsize=8192,timeo=14,intr <ip-address-to-server>:/ /home/it/share3 nfs4 rsize=8192,wsize=8192,timeo=14,intr Remount everything: su -c "mount -a" Troubleshooting How to test Next time... Common problems and fixes Later... More Information RedHat recommends, on RHEL5 Docs, that one should use automount instead of /etc/fstab; which saves resources when sharing to multiple workstations. I haven't had the time to try this configuration. This document will be modified/augmented once I've got the hang of it. Disclaimer I haven't had te opportunity to test this HowTo since I lack of a networked PC to do it, so you may run into problems, if you do, come to #fedora on irc.freenode.net or leave me messages so I know what's up. Feel free to propose changes and stuff.
Added Reading http://www.redhat.com/docs/manuals/enterprise/RHEL-5-manual/Network_Related_Configuration/ch-nfs.html http://www.brennan.id.au/19-Network_File_System.html