DATE | TIME | WHERE |
Wed Apr 14, 2010 | ALL DAY | #fedora-test-day |
What to test?
Today's instalment of Fedora Test Day will focus on the radeon driver for ATI/AMD Radeon graphics cards.
If you come to this page after the test day is completed, your testing is still valuable, and you can use the information on this page to test with your graphics card and provide feedback.
Who's available
The following cast of characters will be available for testing, workarounds, bug fixes, and general discussion...
- Development - Dave Airlie (airlied), Jerome Glisse (jglisse)
- Quality Assurance - Adam Williamson (adamw)
What's needed to test
- An ATI Radeon (or FireGL) graphics adapter. To confirm whether you have supporting hardware, run the following command:
/sbin/lspci -d 1002: | grep -iq VGA && echo "Join Radeon Fedora Test Day" || echo "Sorry, no Radeon graphics hardware found."
- An updated Fedora 42 pre-release, or the special live image (see below)
- Your hardware profile uploaded to Smolt according to these instructions
How to test?
Update your machine
If you're running Fedora 42, make sure you have all the current updates for it installed, using the update manager. If you have any problems running the test, please also install these updated builds from Koji and re-test before reporting a failure:
Or you can use a live image:
Live image
Optionally, you may download a non-destructive Fedora 42 live image for your architecture. Tips on using a live image are available at FedoraLiveCD.
Architecture | SHA256SUM |
---|---|
i686 | accc5379d7809811b313083088099c3d7ce83a8cd0d3baf99de2fb39a4c8fb5a
|
x86_64 | fa1de3c207f000ba6212b39692395e2af71a8e7322aac5cb4a92989c24decb33
|
Test
Follow each of these test cases:
- QA:Testcase_radeon_basic
- QA:Testcase_radeon_xvideo
- QA:Testcase_radeon_rotate
- QA:Testcase_radeon_restartx
- QA:Testcase_radeon_dpms
- QA:Testcase_radeon_glx (3D support for r600 and r700 cards - anything in the Radeon HD 2xxx, HD 3xxx, or HD 4xxx series - is quite experimental at this time, expect problems)
- QA:Testcase_radeon_fastuserswitch
- QA:Testcase_radeon_vt
- QA:Testcase_radeon_suspend
- QA:Testcase_radeon_rendercheck (requires 15 minutes)
- QA:Testcase_radeon_compositing_manager
Multihead test case:
You will need two or more monitors to perform the multihead test.
Optional extended OpenGL test cases (some of these will require you to at least move around in games):
- QA:Testcase_radeon_3D_pymol
- QA:Testcase_radeon_3D_avogadro
- QA:Testcase_radeon_3D_openarena
- QA:Testcase_radeon_3D_tuxracer
- QA:Testcase_radeon_3D_mesa-demos
These will provide more detailed testing of 3D functionality. Please file bugs for any failures you find if running these tests.
Report your results
If you have problems with any of the tests, report a bug to Bugzilla usually for the component xorg-x11-drv-ati. If you are unsure about exactly how to file the report, just ask on IRC and we will help you. Follow the instructions on this page to ensure you include sufficient information in the report. Once you have completed the tests, add your results to the Results table below, following the example results from Example user as a template. The first column should be your name with a link to your User page in the Wiki if you have one, and the second should be a link to your Smolt hardware profile (see above for a link with instructions on submitting your hardware profile to Smolt). For each test case, if your system worked correctly, simply enter the word PASS. If you had trouble, enter the word FAIL, with a footnote indicator, and put a link to the bug report in the comments column (as in the example line). If you could not perform one test (for example, you cannot perform the more advanced tests because the basic one fails, or you cannot perform the multihead test as you have only one display), enter the word N/A. In the comments column, you can enter the model name and PCI device ID (vendor ID is usually 1002) of your card, if you know it - you can usually find this information in the output of the command lspci -nn.
Results
User | Smolt Profile | Basic test | XVideo | Rotation | X restart | DPMS | GLX | User switch | VT switch | Suspend | Rendercheck | Compositing | Multihead | Comments |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Example user | HW | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | N/A | FAIL [1] | |
Colin Redfern | HW | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | N/A | PASS | PASS | PASS | KDE LIVE CD RV535XT Radeon X1650 Pro |
Adrian Glaubitz | HW | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | after disabling multi-head (disabling external VGA monitor), laptop display does not return back to native resolution (1400x1050) automatically |
Robert de Rooy | HW | PASS[1] | PASS | Singlehead PASS Dualhead FAIL |
PASS | PASS | Singlehead PASS Dualhead FAIL [2] |
PASS | PASS | FAIL [3] | N/A | Singlehead PASS Dualhead FAIL |
LVDS+VGA PASS LVDS+DVI PASS[4] SVIDEO FAIL [5] |
RV250 with 32MB VRAM |
Homer Xing | HW | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | N/A | I have only one monitor :( | Radeon X1950GT | |
Staffan Björnesjö | HW | FAIL [1] | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | N/A | PASS | RS780 (HD3200)
|
Patrick Oltmann | HW | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | N/A | PASS | PASS | PASS | ATI FireGL V3600 RV630 [1002:958d] 256 MB, Dual-DVI |
Patrick Oltmann | HW | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | Radeon HD 4870 RV770 [1002:9440] 512 MB, DVI+DP |
Patrick Oltmann | HW | PASS | PASS | PASS | PASS | PASS | FAIL[1] | PASS | PASS | PASS | PASS | PASS | FAIL[2][3][4][5][6] | ATI FireMV 2200 PCI RV280 [1002:5965] 64 MB, DMS-59
|
liam | HW | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | N/A | PASS | PASS | N/A | ATI Technologies Inc RV620 [ATI FireGL V3700] |
Rainer Koenig | HW | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | N/A | PASS | ATI Technologies Inc RV630GL [ATI FireGL V5600] |
kho | HW | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS [1] | PASS | PASS | PASS | ATI Technologies Inc RV710 [Radeon HD 4350] [1002:954f] using 64bit test-day live image outputs used: hdmi and DVI "[drm:drm_mode_getfb] *ERROR* invalid framebuffer id" occurs every time the screen gets back on, after DPMS test, Userswitch etc
|
Török Edwin | HW | PASS [1] | PASS [2] | PASS | PASS | PASS | FAIL [3][4][5] | PASS | PASS | PASS | FAIL[6] | PASS | N/A | ATI Technologies Inc RV730 PRO [Radeon HD 4650] [1002:9498]
|
Michal Schmidt | HW | PASS | PASS | PASS | PASS | PASS | PASS[1] | PASS | PASS | PASS | PASS [2] | PASS | FAIL[3] | RS690M |
Michal Schmidt | HW | PASS | PASS | PASS | PASS | PASS | FAIL[1] | PASS | PASS | PASS | PASS | PASS | N/A | RV280 |
Patrick C. F. Ernzer | ES 1000 (1002:515e rev 02) on IBM LS21 and LS42 | FAIL [1] | untested because of first fail | untested because of first fail | untested because of first fail | untested because of first fail | untested because of first fail | untested because of first fail | untested because of first fail | untested because of first fail | untested because of first fail | untested because of first fail | untested because of first fail | |
Patrick C. F. Ernzer | ES 1000 (1002:515e rev 02) on HP DL360G5 | PASS | FAIL [1] | FAIL [2] | PASS | not yet tested | not yet tested | not yet tested | not yet tested | not yet tested | not yet tested | not yet tested | not yet tested | No BZ entries yet, will do when all tests done (next week) |
tialaramex | HW | FAIL[1] | ||||||||||||
Daniel J Blueman | ATI M92 Mobility Radeon HD 4500 Series 1002:9553 | PASS | FAIL [1] | PASS | PASS | PASS | TBA (GLX) | PASS | PASS | PASS | TBA (Rendercheck) | PASS | TBA |
|
Daniel J Blueman | ATI Radeon HD 3870 1002:9501 | PASS | PASS | PASS | PASS | PASS | FAIL [1] | PASS | PASS | PASS | FAIL [2] | PASS | PASS | |
Syed Amer Gilani | HW | PASS/FAIL [1] | FAIL [2] | FAIL | N/A | PASS | FAIL [3] | N/A | N/A | N/A | N/A | N/A | PASS | Radeon HD 5770 |
Bruno Wolff | FireGL V3400 (rv530gl) | PASS | PASS | PASS | Pending | PASS | PASS | PASS | PASS | N/A | Pending | Pending | Pending | Switching from metacity to compiz dumped all of apps into the upper left desktop. I am not sure that's a bug, but it is annoying. During the vt switch test my X session was on vt7 not vt1. |
ghayes | HW [1] | PASS | PASS | PASS | PASS | PASS | PASS [2] | PASS | FAIL [3] | PASS/FAIL [4] | PASS | N/A | N/A | ATI Technologies Inc RS690M [Radeon X1200 Series] Tests run at native display reslolution 1280x800
|
Michal Hlavinka | HD4570 | PASS | PASS | PASS | PASS | PASS | FAIL[1][2] | PASS | PASS | PASS | log[3] | PASS | N/A | |
apetz | HW | PASS | PASS | PASS | N/A | PASS | PASS | N/A | PASS | N/A | N/A | PASS | N/A | R420 JI [Radeon X800PRO] |
Lars Hamann | HW | FAIL [1] | untested because of first fail | untested because of first fail | untested because of first fail | untested because of first fail | untested because of first fail | untested because of first fail | untested because of first fail | untested because of first fail | untested because of first fail | untested because of first fail | untested because of first fail | |
Adam Huffman | smolt failed - card is HD4850 (RV770) | PASS/FAIL [1] | PASS | PASS | PASS | PASS | PASS | FAIL [2], [3] | PASS | PASS/FAIL[4] | N/A | PASS | PASS |
|
Paul W. Frields | HW | PASS | PASS[1] | PASS | PASS | PASS | PASS | PASS | PASS | N/A[2] | PASS | PASS | N/A[3] | ATI Technologies Inc RV770 [Radeon HD 4850] [1002:9442] |
Mr Wolf | HW | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | FAIL [1] | FAIL [2] | PASS | N/A | ATI Radeon HD 3650 [1002:9598] |
Ville-Pekka Vainio | HW | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | FAIL [1] | log | PASS | N/A | ATI Technologies Inc RV620 LE [Radeon HD 3450]
|
User | Smolt Profile | Basic test | XVideo | Rotation | X restart | DPMS | GLX | User switch | VT switch | Suspend | Rendercheck | Compositing | Multihead | Comments |