From Fedora Project Wiki
DATE TIME WHERE
Thu Feb 24, 2011 All day #fedora-test-day) webchat

What to test?

Today's Fedora Test Day will focus on the Intel graphics card driver.

If you come to this page after the test day is completed, your testing is still valuable, and you can use the information on this page to test with your graphics card and provide feedback.

Who's available

The following cast of characters will be available for testing, workarounds, bug fixes, and general discussion...

What's needed to test

How to test?

Update your machine

If you're running Fedora 42, make sure you have all the current updates for it installed, using the update manager. Or you can use a live image:

Live image

Optionally, you may download a non-destructive Fedora 42 live image for your architecture. Tips on using a live image are available at FedoraLiveCD.

Architecture SHA256SUM
i686 4553b73f8fab46fbb85384974decc7f9595e5c7af6df76e303cef5e62a76e07f
x86_64 e59d1886f7b766011b89d88369d09a4dd46bd7ba8a25664e9de0430d0f8725d7

Testing

Follow each of these test cases:

Multihead test case:

You will need two or more monitors to perform the multihead test.

Optional extended OpenGL test cases (some of these will require you to at least move around in games):

These will provide more detailed testing of 3D functionality. Please file bugs for any failures you find if running these tests.

Report your results

If you have problems with any of the tests, report a bug to Bugzilla usually for the component xorg-x11-drv-intel. If you are unsure about exactly how to file the report, just ask on IRC and we will help you. Follow the instructions on this page to ensure you include sufficient information in the report. Once you have completed the tests, add your results to the Results table below, following the example results as a template. The first column should be your name with a link to your User page in the Wiki if you have one, and the second should be a link to your Smolt hardware profile (see above for a link with instructions on submitting your hardware profile to Smolt). For each test case, use the result template to enter your result, as shown in the example result line. If you could not perform one test (for example, you cannot perform the more advanced tests because the basic one fails, or you cannot perform the multihead test as you have only one display), enter the word N/A. In the comments column, you can enter the model name and PCI device ID (vendor ID is usually 8086) of your card, if you know it - you can usually find this information in the output of the command lspci -nn.

Results

Main results

User Smolt Profile Basic test GNOME 3 start DPMS XVideo Rotation X restart Rendercheck GLX User switch VT switch Suspend Multihead Comments
Example user HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
N/A
Fail fail [1]
Warning warn [2]
  1. RHBZ #123456
  2. RHBZ #234567
Michel Duquaine HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
N/A
Pass pass
Pass pass
Pass pass
Fail fail [1]
N/A
  1. RHBZ #680104
Artur Szymczak HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
N/A N/A
kparal HW
Pass pass
Pass pass
Warning warn [1]
Pass pass
Pass pass
Warning warn
[2]
Pass pass
[3]
Pass pass
Pass pass
Pass pass
Pass pass
Fail fail [4] [5] [6]
00:02.0 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)
  1. RHBZ #582532
  2. I saw some Xserver traceback after logging out, but I am not able to reproduce it again.
  3. File:Kparal 20110224 renderchecklog.gz
  4. RHBZ #680066
  5. RHBZ #639229
  6. RHBZ #639243
ignotusp HW
Pass pass
Pass pass
Pass pass
Warning warn [1]
none
none
none
none
none
none
none
none
  1. RHBZ #675040
Matěj Cepl HW
Pass pass
Pass pass
Pass pass
Fail fail [1]
Pass pass
Pass pass
Pass pass
[2]
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
  1. RHBZ #679776
  2. [1]
laputa HW
Pass pass
Pass pass
Pass pass
Pass pass
Warning warn [1]
Pass pass
Pass pass
[2]
Pass pass
Pass pass
Pass pass
Fail fail
Pass pass
  1. RHBZ #679990
  2. [2]
Jaroslav Pulchart HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
[1]
Pass pass
Pass pass
Pass pass
Pass pass
Warning warn

[2] [3] [4] [5] [6]

  1. File:Jaroslav.Pulchart 945GME renderchecklog.gz
  2. 1024x600 + 1920x1200
  3. Gnome 3 shell: First connection to second monitor is "OK" but very slow (mutter 95% CPU). After disconnecting it is OK and resolutions are switched automatic. But second connection killed Gnome3 session.
  4. RHBZ#680037
  5. Gnome 3 fallback: is OK
  6. XV slow
bojan HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
timlau HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
N/A N/A
jhs HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
N/A
Pass pass
Warning warn [1]
Pass pass
Fail fail [2]
none
  1. RHBZ #680098
  2. RHBZ #680104
Reinout van Schouwen HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Inprogress inprogress
Pass pass
[1]
Pass pass
Inprogress inprogress
Pass pass
Pass pass
Pass pass
[2]
Steve Gordon HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Fail fail
[1]
Pass pass
[2]
Pass pass
Fail fail
[3]
Pass pass
Fail fail
[4]
none
N/A
  1. RHBZ#680132
  2. https://fedoraproject.org/wiki/File:Sgordon_rendercheck.txt
  3. "Unable to start new display. The name org.gnome.DisplayManager was not provided by any .service files" on attempting to switch user from gnome-shell. Suspect this is not however a driver bug?
  4. RHBZ#680142
Uwe Kleine-König HW
Pass pass
[1]
Warning warn
[2]
Pass pass
Fail fail
[3]
Pass pass
Pass pass
[4]
Warning warn
[5]
Pass pass
Pass pass
Pass pass
Fail fail
[6]
Hardware: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] + [8086:2792]
  1. but note that when starting e.g. a Terminal I get some artifacts at the left border of the screen
  2. only got fallback, starting gnome-shell --replace works, but is too slow to use
  3. In fullscreen the time slider wasn't available, only blinked a few times just to disappear again plus some strange effects on the Desktop even after totem segfaulted (reported using that crash applet). All that without compositing.
  4. renderchecklog.gz
  5. reported ~60 FPS, but damn slow
  6. gnome spans both monitors, but I cannot disable one of them; it is instantly reenabled, related bugreport
dawb HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
none
N/A
All worked perfectly (and better than my current F13 install).
User Smolt Profile Basic test GNOME 3 start DPMS XVideo Rotation X restart Rendercheck GLX User switch VT switch Suspend Multihead Comments
David Juran HW
Pass pass
Pass pass
Pass pass
[1]
  1. worked flawlessly including taking the laptop out of the docking station and replacing it
Sai Vinoba HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
[1]
Pass pass
Pass pass
Pass pass
Pass pass
NA
  1. My renderchecklog: [3]
ivan jimenez HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Ralph Giles HW
Pass pass
Pass pass
[1]
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
[2]
Pass pass
Pass pass
Pass pass
Pass pass
N/A Intel Pineview Integrated Graphics [8086:a011]
  1. gnome-shell works, but in general is a little slow. Separate operations (clear, then paint) are generally visible on redraws.
  2. [renderchecklog]
tflink HW
Pass pass
Pass pass
Pass pass
Warning warn
[1]
Pass pass
Inprogress inprogress
Inprogress inprogress
Pass pass
Warning warn
[2]
Fail fail
[3]
Inprogress inprogress
Inprogress inprogress
  1. Could not open video files (ogg or webm) with totem
  2. Could not execute xv testcase as either user
  3. attempting to log in as any user from VT was met with errors
opossum1er HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
[1]
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
[2][3]
Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02)Tests done with live image
User:jbastian HW
Pass pass
Warning warn [1]
[2]
Warning warn [3]
[4]
Pass pass
Pass pass
Warning warn [5]
[6]
Pass pass
Pass pass
Warning warn [7]
[8]
Pass pass
Warning warn [9]
[10]
N/A
  1. RHBZ #679326
  2. Due to known timing bug, it sometimes starts in fallback mode.
  3. RHBZ #582532
  4. The screen does turn off, but it turns on again by itself a few seconds later.
  5. RHBZ #680272
  6. Occasionally X seg faults when logging out.
  7. RHBZ #680065
  8. Screen does not lock when you switch users; hit CTRL-ALT-Fn to switch between users without a password.
  9. RHBZ #679622
  10. The menu option shuts down instead of suspends, but closing the lid properly suspends.
Cedric Olivier HW
Pass pass
Pass pass
Pass pass
N/A
Pass pass
Pass pass
Pass pass
[1]
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
00:02.0 VGA compatible controller: Intel Corporation Pineview Integrated Graphics Controller

00:02.1 Display controller: Intel Corporation Pineview Integrated Graphics Controller

Tests done with live image
Markus Mayer HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
[1]
Pass pass
Pass pass
Pass pass
Pass pass
N/A VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)
Chris Adams HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
[1]
  1. Tested both VGA and HDMI-via-DisplayPort++
Teni HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Eric Blake HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
[1]
Warning warn
[2]
Pass pass
Pass pass
Warning warn
[3]
Pass pass
  1. 46 tests passed of 46 total, so I'm not uploading any file
  2. glxgears started fine at first, but I left it running for more than an hour, and eventually my LiveCD boot ran out of memory (read-only file system) and the gears quit spinning; I wonder if there is a resource leak or log file that overflows the livecd file system
  3. pm-suspend took everything down, and on recovery, glxgears was still running; but I was running on LiveCD, and something about recovery made it so that all attempts to spawn new process failed with a segfault; not sure if it was an issue with livecd limitations, so I'm not opening a BZ
Alex Williamson HW
Fail fail
[1]
Pass pass
Pass pass
Pass pass
Pass pass
Warning warn
[2]
Pass pass
[3]
Warning warn
[4]
Pass pass
Pass pass
Fail fail
[5]
Fail fail
[6]
  1. BZ680325
  2. Same as BZ680325, desktop spans disabled display
  3. 46 tests passed of 46 total
  4. With glxgears, terminal, and ff running, can sometimes get stray graphics when moving the mouse around on gnome shell's overview screen. This also sometimes occurs with glxgears running and opening the shutdown dialog.
  5. Ran pm-suspend. First time succeeded. Second time hung the graphics. Mouse moves, windows are not interactive, ctrl-alt-f2 kills mouse, ctrl-alt-f* doesn't do anything from that point.
  6. Double FAIL! BZ639057 still present from F14, plus BZ680333. Along with BZ680325 and suspend issues, this makes F15 completely unusable for this laptop
Dan Scott HW
Pass pass
Pass pass
Pass pass
Fail fail [1]
Pass pass
Pass pass
Pass pass
[2]
Pass pass
Pass pass
[3]
Pass pass
[4]
Fail fail
[5]
N/A Integrated Graphics Chipset: Intel(R) GM45
  1. RHBZ #680231
  2. Rendercheck
  3. notification-daemon died when I switched to different users
  4. desktop was on CTRL-ALT-F7; CTRL-ALT-F1 just led to a raw, empty xterm window
  5. Closed laptop lid, system suspended; after about five minutes, opened lid and system resumed nicely. However, about ten minutes later the system slowly died with symptoms similar to Alex Williamson's, above. Could also be because I left glxgears running in each of the two users I had switched to, following Eric Blake's theory of a resource leak.
Liam HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Rob Whalley HW
Pass pass
Warning warn [1] [2]
Pass pass
Pass pass
Pass pass
Fail fail [3]
Pass pass
Pass pass
Pass pass
Pass pass
Fail fail [4]
N/A Samsung NC10 - Intel Corporation Mobile 945GME Express Integrated Graphics Controller
  1. RHBZ #677555
  2. RHBZ #679326
  3. RHBZ #680132
  4. RHBZ #680104
Michal Nowak HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
N/A
Pass pass
[1]
Pass pass
Pass pass
Pass pass
N/A N/A Prestigio Nobile 156 - Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
Pitr HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Fail fail
[1]
Fail fail
[2]
  1. System suspends fine - leds are glitching properly - but it hangs on resume
  2. It's an Nvidia Optimus laptop and the second screen connected to hdmi port is useless. xrandr outputs: LVDS1 connected ... VGA1 disconnected HDMI1 disconnected DP1 disconnected
User Smolt Profile Basic test GNOME 3 start DPMS XVideo Rotation X restart Rendercheck GLX User switch VT switch Suspend Multihead Comments
Rolle Contact Me HW
Pass pass
Warning warn
[1]
Pass pass
Pass pass
Warning warn
[2]
Pass pass
[3]
Warning warn
[4]
Pass pass
[5]
Pass pass
Pass pass
Fail fail
[6]
Warning warn
[7]
Laptop FUJITSU SIEMENS LIFEBOOK E8420
VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)
  1. Sometimes the window-manager crashed. 2 times when it crashed the upper panel and alle windows disappears. Another time only the frameborders disappears, but the windows stay on desktop.
  2. The rotation is ok. But when I choose 180 degree rotation (and only with 180) and switches back to normal view, the normal view gets darker. The display light on the laptop was set to a darker value. With the brightness keys I can set it to the normal value.
  3. Works. On terminal the following output appears:
    File:Rolle.2011-02-26.XRestart.JPG.gz
    File:Rolle 2011-02-26 Xorg.0.log.gz.
    Another hint: desktop was on CTRL-ALT-F7; CTRL-ALT-F1 is a terminal with bootmessages.
  4. This test was really fast over, but no error occured. The time-command says:
    real 0m57.643s
    user 0m0.705s
    sys 0m0.134s
    File:Rolle 2011-02-26 Renderchecklog.gz
  5. Running synchronized to the vertical refresh. The framerate should be approximately the same as the monitor refresh rate.
    302 frames in 5.0 seconds = 60.292 FPS
    299 frames in 5.0 seconds = 59.638 FPS
    299 frames in 5.0 seconds = 59.677 FPS
    299 frames in 5.0 seconds = 59.753 FPS
    299 frames in 5.0 seconds = 59.724 FPS
    300 frames in 5.0 seconds = 59.987 FPS
    298 frames in 5.0 seconds = 59.553 FPS
    298 frames in 5.0 seconds = 59.543 FPS
    XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
    after 4936 requests (4936 known processed) with 0 events remaining.
  6. After 1-2 seconds the system give up to suspend and nothing happens. The desktop remains fully visible and usable.
  7. The second monitor is working and also the plug'n'play is working. The only thing is, when I locate the second monitor under the first one, on the second monitor on the upper side is a "gradient"-artefact, see File:Rolle 2011-02-26 Multihead.png.gz
    Screen 0: minimum 320 x 200, current 1680 x 2250, maximum 8192 x 8192
    LVDS1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
    1680x1050 60.0*+
    1400x1050 60.0
    1280x1024 60.0
    1280x960 60.0
    1024x768 60.0
    800x600 60.3 56.2
    640x480 59.9
    VGA1 connected 1600x1200+0+1050 (normal left inverted right x axis y axis) 395mm x 295mm
    1600x1200 85.0*
    1280x1024 85.0 75.0
    1152x864 75.0
    1024x768 85.0 75.1 70.1 60.0
    832x624 74.6
    800x600 72.2 75.0 60.3 56.2
    640x480 72.8 75.0 66.7 60.0
    720x400 70.1
    HDMI1 disconnected (normal left inverted right x axis y axis)
    DP1 disconnected (normal left inverted right x axis y axis)
    HDMI2 disconnected (normal left inverted right x axis y axis)
    DP2 disconnected (normal left inverted right x axis y axis)
    DP3 disconnected (normal left inverted right x axis y axis)
Karol T. Gajowniczek HW
Pass pass
Pass pass
Pass pass
Pass pass
Fail fail
[1]
Pass pass
Pass pass
[2]
Pass pass
Pass pass
Fail fail
[3]
Pass pass
Warning warn
[4]
DELL Latitude D630: Intel Corporation Mobile GM965
LVDS1 connected 1440x900+0+0 
   1440x900       60.0*+
DVI1 connected 1680x1050+1440+0 
   1680x1050      59.9*+
Michal Hlavinka HW
Pass pass
Pass pass
Warning warn [1]
Pass pass
Warning warn [1]
Pass pass
Warning warn
[2]
Pass pass
not yet
Pass pass
Pass pass
N/A dpms and rotation reduce backlight every time a little
  1. 1.0 1.1 RHBZ #679990
  2. Rendercheck box was four times higher than usual. File:Intel mhlavink renderchecklog.gz RenderCheckLog
User Smolt Profile Basic test GNOME 3 start DPMS XVideo Rotation X restart Rendercheck GLX User switch VT switch Suspend Multihead Comments

Extended 3D tests

User Smolt Profile Pymol Avogadro OpenArena Tux Racer mesa-demos Comments
Example user HW
Pass pass
Pass pass
N/A
Fail fail [1]
Warning warn [2]
  1. RHBZ #123456
  2. RHBZ #234567
kparal HW
none
none
none
Fail fail [1] [2]
none
  1. RHBZ #680082
  2. RHBZ #680116
Matěj Cepl HW
Pass pass
none
none
none
Pass pass
ivan jimenez HW
Pass pass
[1]
  1. no artifacts but rendering slow
Cedric Olivier HW
Pass pass
N/A N/A
Pass pass
Pass pass
Chris Adams HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Michal Nowak HW
Pass pass
Pass pass
N/A N/A
Pass pass
Rolle Contact Me HW
Pass pass
Warning warn
[1]
[2]
Pass pass
Pass pass
Laptop FUJITSU SIEMENS LIFEBOOK E8420
VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)
  1. As Liveuser it works.
    As root-User it fails with the following shell-output:
    root@localhost mesa]# avogadro
    ..
    GLib-GIO:ERROR:gdbusconnection.c:2279:initable_init: assertion failed: (connection->initialization_error == NULL)
    Aborted (core dumped)
  2. Installation error
Rolle Contact Me HW
Pass pass
Warning warn
[1]
N/A
Pass pass
[2]
Pass pass
Netbook Asus EeePC 1001PX
00:02.0 VGA compatible controller [0300]: Intel Corporation Pineview Integrated Graphics Controller [8086:a011]
  1. As Liveuser it works.
    As root-User it fails with the following shell-output:
    root@localhost mesa]# avogadro
    ..
    GLib-GIO:ERROR:gdbusconnection.c:2279:initable_init: assertion failed: (connection->initialization_error == NULL)
    Aborted (core dumped)
  2. When I quit the program, when in the shell-window it outputs the following:
Karol T. Gajowniczek HW N/A N/A N/A
Warning warn
[1]
N/A
  1. LVDS1 didn't return to pre-game resolution but stayed 800x600 on multihead
User Smolt Profile Pymol Avogadro OpenArena Tux Racer mesa-demos Comments