Fedora 17
Kernel 3.5.1-1.fc17
To test all machines were installed with the F17 GA image, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | boot | Network | Serial | USB | Storage | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | ||||||||
| Versatile Express+XFCE (Qemu) | ||||||||
| Pandaboard | bjohnson |  |
|
|
|
Not tested: Serial/Display | ||
| Pandaboard+XFCE | ||||||||
| Trimslice Bare/Value Pro/H/H250 | ||||||||
| Trimslice Pro/H/H250 | pwhalen | |
|
n/a | ||||
| Highbank | pwhalen | |
|
|
|
n/a | ||
| Beagleboard XM | ||||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | ||||||||
| Efika SmartTop iMX | n/a |
Kernel 3.5.2-3.fc17
To test all machines were installed with the F17 GA image, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | boot | Network | Serial | USB | Storage | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | ||||||||
| Versatile Express+XFCE (Qemu) | ||||||||
| Pandaboard | bjohnson | |
|
|
|
Not tested: Serial/Display | ||
| Pandaboard+XFCE | jcapik | |
|
|
|
|
 |
Only /dev/ttyO2 tested (console), both HDMI outputs are dead/off |
| Trimslice Bare/Value Pro/H/H250 | ||||||||
| Trimslice Pro/H/H250 | n/a | |||||||
| Highbank | n/a | |||||||
| Beagleboard XM | ||||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | bjohnson | |
BZ 834977 | |||||
| Efika SmartTop iMX | n/a |
kernel-3.5.3-1.fc17
To test all machines were installed with the F17 GA image, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | boot | Network | Serial | USB | Storage | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | ||||||||
| Versatile Express+XFCE (Qemu) | ||||||||
| Pandaboard | bjohnson | |
|
|
|
Not tested: Serial/Display | ||
| Pandaboard+XFCE | ||||||||
| Trimslice Bare/Value Pro/H/H250 | |
|
|
|
|
n/a | ||
| Trimslice Pro/H/H250 | n/a | |||||||
| Highbank | n/a | |||||||
| Beagleboard XM | ||||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | bjohnson, till | |
BZ 834977 | |||||
| Efika SmartTop iMX | n/a |
kernel-3.6.0-3.fc18
To test all machines were installed with a F17 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Storage | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | n/a | ||||||||
| Versatile Express+XFCE (Qemu) | |||||||||
| Pandaboard | pwhalen | SD | |
|
|
|
|
n/a | |
| Pandaboard+XFCE | |||||||||
| Trimslice Bare/Value Pro | SD | n/a | |||||||
| Trimslice Pro/H/H250 | SATA | n/a | |||||||
| Highbank | SATA | n/a | |||||||
| Beagleboard XM | |||||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | |||||||||
| Efika SmartTop iMX | n/a |
Fedora 18
Kernel 3.5.0-1.fc18
To test all machines were installed with the F17 GA image, updated then rebooted. The 3.5.0-1.fc18 kernel was installed and the machine rebooted again.
| Hardware | Who | boot | Network | Serial | USB | Storage | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | |
|
|
grubby failed to create initrd during update, manually created. | |||
| Versatile Express+XFCE (Qemu) | pwhalen | |
||||||
| Pandaboard | pwhalen | |
dracut Warning: /dev/disk/by-label/rootfs does not exist | |||||
| Pandaboard+XFCE | pwhalen | |
dracut Warning: /dev/disk/by-label/rootfs does not exist | |||||
| Trimslice Bare/Value Pro/H/H250 | dmarlin | |
dracut Warning: /dev/disk/by-uuid/e012ed6f-bc62-45ba-89af-2fb4e092aea2 does not exist | |||||
| Trimslice Pro/H/H250 | pwhalen | |
|
|
|
|
n/a | Booted off internal sata. |
| Highbank | dmarlin | |
Did not boot, patches upstream | |||||
| Beagleboard XM | ||||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | pwhalen | |
Uncompressing Linux... done, booting the kernel. (no further output on serial) | |||||
| Efika SmartTop iMX (dmesg) | ndevos | |
|
|
|
|
n/a | Does not detect front USB ports, internal ports are OK. Does not detect internal pata_imx storage. |
Kernel 3.6.0-0.rc1.git2.2.fc18
To test all machines were installed with the F17 GA image, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | boot | Network | Serial | USB | Storage | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | ||||||||
| Versatile Express+XFCE (Qemu) | ||||||||
| Pandaboard | ||||||||
| Pandaboard+XFCE | ||||||||
| Trimslice Bare/Value Pro/H/H250 | ||||||||
| Trimslice Pro/H/H250 | n/a | |||||||
| Highbank | pwhalen | |
n/a | [fpaste] Known issue, patched by dgilmore 10aug12. | ||||
| Beagleboard XM | ||||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | ||||||||
| Efika SmartTop iMX | n/a |
kernel-3.6.0-0.rc3.git2.1.fc18
To test all machines were installed with the F17 GA image, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | boot | Network | Serial | USB | Storage | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | |
fpaste | ||||||
| Versatile Express+XFCE (Qemu) | ||||||||
| Pandaboard | pwhalen | |
fpaste | |||||
| Pandaboard+XFCE | ||||||||
| Trimslice Bare/Value Pro/H/H250 | pwhalen | |
fpaste | |||||
| Trimslice Pro/H/H250 | n/a | |||||||
| Highbank | n/a | |||||||
| Beagleboard XM | ||||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | ||||||||
| Efika SmartTop iMX | n/a |
kernel-3.6.0-0.rc3.git4.1.fc18
To test all machines were installed with the F17 GA image, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | boot | Network | Serial | USB | Storage | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | |
fpaste | |||||
| Versatile Express+XFCE (Qemu) | ||||||||
| Pandaboard | pwhalen | |
fpaste | |||||
| Pandaboard+XFCE | ||||||||
| Trimslice Bare/Value Pro/H/H250 | pwhalen | |
fpaste | |||||
| Trimslice Pro/H/H250 | pwhalen | |
n/a | fpaste | ||||
| Highbank | pwhalen | |
|
|
|
n/a | ||
| Beagleboard XM | ||||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | |
OpenRD fpaste | ||||||
| Efika SmartTop iMX | n/a |
kernel-3.6.0-0.rc4.git0.1.fc18
To test all machines were installed with the F17 GA image, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | boot | Network | Serial | USB | Storage | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | |
|
|
||||
| Versatile Express+XFCE (Qemu) | ||||||||
| Pandaboard | pwhalen | |
|
|
|
|
n/a | Booting from usb successful. Booting from mmc fails. fpaste |
| Pandaboard+XFCE | jcapik | |
console log | |||||
| Trimslice Bare/Value Pro/H/H250 | pwhalen | |
SD card not recognized. | |||||
| Trimslice Pro/H/H250 | pwhalen | |
|
|
|
|
n/a | Booting from internal sata, SD cards not recognized. |
| Highbank | pwhalen | |
|
|
n/a | |
n/a | |
| Beagleboard XM | ||||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | ||||||||
| Efika SmartTop iMX | n/a |
kernel-3.6.0-0.rc4.git2.1.fc18
To test all machines were installed with the F17 GA image, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | boot | Network | Serial | USB | Storage | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | ||||||||
| Versatile Express+XFCE (Qemu) | ||||||||
| Pandaboard | pwhalen | |
f18 rootfs fpaste | |||||
| Pandaboard+XFCE | jcapik | |
console log | |||||
| Trimslice Bare/Value Pro/H/H250 | pwhalen | |
fpaste | |||||
| Trimslice Pro/H/H250 | pwhalen | |
|
|
|
n/a | Load address of uInitrd changed to boot. Changed to '4880000'. (Fixes CRC error on GA image). | |
| Highbank | n/a | |||||||
| Beagleboard XM | ||||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | ||||||||
| Efika SmartTop iMX | n/a |
kernel-3.6.0-0.rc5.git2.1.fc18
All tests need to be performed using a Fedora 18 root filesystem. This is currently available from [here].
To test all machines were installed with the F18 nightly image, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | boot | Network | Serial | USB | Storage | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | |
fpaste INITRD: 0x60d00000+0x00b3eb00 overlaps in-use memory region - disabling initrd. | |||||
| Versatile Express+XFCE (Qemu) | ||||||||
| Pandaboard | pwhalen | |
mmc issue fpaste | |||||
| Pandaboard+XFCE | ||||||||
| Trimslice Bare/Value Pro/H/H250 | pwhalen | |
mmc issue fpaste | |||||
| Trimslice Pro/H/H250 | pwhalen | |
|
|
|
|
n/a | mmc issue |
| Highbank | n/a | |||||||
| Beagleboard XM | ||||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | ||||||||
| Efika SmartTop iMX | n/a |
kernel-3.6.0-0.rc6.git2.1.fc18
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Storage | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | disk image | |
|
|
Using patched version of qemu. | |||
| Versatile Express+XFCE (Qemu) | |||||||||
| Pandaboard | pwhalen | USB HD(boot on SD) | |
fpaste | |||||
| Pandaboard+XFCE | |||||||||
| Trimslice Bare/Value Pro/H/H250 | pwhalen | SD | |
||||||
| Trimslice Pro/H/H250 | pwhalen | SATA | |
|
|
|
|
n/a | no mmc |
| Highbank | n/a | ||||||||
| Beagleboard XM | |||||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | |||||||||
| Efika SmartTop iMX | n/a |
kernel-3.6.0-0.rc7.git1.4.fc18
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Storage | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | |
|
|
Using patched version of qemu | ||||
| Versatile Express+XFCE (Qemu) | |||||||||
| Pandaboard | pwhalen | SD | |
fpaste | |||||
| Pandaboard+XFCE | |||||||||
| Trimslice Bare/Value Pro | pwhalen | SD | |
n/a | |||||
| Trimslice Pro/H/H250 | pwhalen | SATA | |
|
|
|
|
n/a | no mmc |
| Highbank | n/a | ||||||||
| Beagleboard XM | |||||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | |||||||||
| Efika SmartTop iMX | n/a |
kernel-3.6.0-1.fc18
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Storage | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | |
|
|
Using patched version of qemu | ||||
| Versatile Express+XFCE (Qemu) | |||||||||
| Pandaboard | pwhalen | SD | |
fpaste | |||||
| Pandaboard+XFCE | |||||||||
| Trimslice Bare/Value Pro | pwhalen | SD | |
n/a | fpaste | ||||
| Trimslice Pro/H/H250 | pwhalen | SATA | |
|
|
|
|
n/a | no mmc |
| Highbank | n/a | ||||||||
| Beagleboard XM | |||||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | |||||||||
| Efika SmartTop iMX | n/a |
kernel-3.6.0-3.fc18
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Storage | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | pwhalen | |
|
|
n/a | ||||
| Versatile Express+XFCE (Qemu) | |||||||||
| Pandaboard | pwhalen | SD | |
|
|
|
|
n/a | |
| Pandaboard+XFCE | |||||||||
| Trimslice Bare/Value Pro | pwhalen | SD | |
|
|
|
|
n/a | |
| Trimslice Pro/H/H250 | pwhalen | SATA | |
|
|
|
|
n/a | |
| Highbank | dmarlin | SATA | |
|
|
|
n/a | ||
| Beagleboard XM | |||||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | |||||||||
| Efika SmartTop iMX | n/a |
kernel-3.6.1-1.fc18
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Storage | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | |||||||||
| Versatile Express+XFCE (Qemu) | |||||||||
| Pandaboard | pwhalen | SD | |
|
|
|
|
n/a | |
| Pandaboard+XFCE | |||||||||
| Trimslice Bare/Value Pro | pwhalen | SD | |
|
|
|
|
n/a | |
| Trimslice Pro/H/H250 | SATA | n/a | |||||||
| Highbank | n/a | ||||||||
| Beagleboard XM | |||||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | |||||||||
| Efika SmartTop iMX | n/a |
kernel-3.6.1-2.fc18
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Storage | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | |||||||||
| Versatile Express+XFCE (Qemu) | |||||||||
| Pandaboard | pwhalen | SD | |
|
|
|
|
n/a | |
| Pandaboard+XFCE | |||||||||
| Trimslice Bare/Value Pro | SD | n/a | |||||||
| Trimslice Pro/H/H250 | pwhalen | SATA | |
|
|
|
|
n/a | |
| Highbank | n/a | ||||||||
| Beagleboard XM | |||||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | |||||||||
| Efika SmartTop iMX | n/a |
Kernel ?
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
| Hardware | Who | media | boot | Network | Serial | USB | Storage | Display | Final Notes |
|---|---|---|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | |||||||||
| Versatile Express+XFCE (Qemu) | |||||||||
| Pandaboard | SD | ||||||||
| Pandaboard+XFCE | |||||||||
| Trimslice Bare/Value Pro | SD | n/a | |||||||
| Trimslice Pro/H/H250 | SATA | n/a | |||||||
| Highbank | n/a | ||||||||
| Beagleboard XM | |||||||||
| Kirkwood (sheevaplug, dreamplug, guruplug, etc) | |||||||||
| Efika SmartTop iMX | n/a |