Upgrading F17 Images to 3.7 Kernel

F17 GA

Starting with the F17 GA image, yum updated 2013-02-14.

Hardware	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	fail Install Failure qemu-system-arm-1.2.2-6.fc18.x86_64 fail Boot Failure				n/a	The install failure resulted on a fully updated F17 system. The boot failure occurred on a F17 GA system, there was no install error, but the kernel did not boot (using qemu-system-arm-1.2.2-6.fc18.x86_64). DTB used for boot test (required).
Pandaboard	pass	pass	pass	pass
Trimslice Bare/Value Pro	fail U-Boot 2010.09-1.03 fail U-Boot 2012.04.01-1.01 pass U-Boot 2012.04.01-1.01					Kernel test booted on F18 rootfs successfully. The Trimslice needs a Uboot upgrade to U-Boot 2012.04.01-1.01, a new boot script that changes the load address for the initramfs and a dtb.
Trimslice Pro/H/H250	fail U-Boot 2010.09-1.03 fail U-Boot 2012.04.01-1.01
Highbank	fail Boot backtrace
Beagleboard XM
Kirkwood						Tested on GuruPlug Server Plus

Hardware	boot	Network	Serial	USB	Display	Final Notes
Versatile Express (Qemu)	fail	Disk Image			n/a	fpaste of boot, using qemu-system-arm-1.2.2-6.fc18.x86_64 with DTB.
Pandaboard	pass	SD	pass	pass	pass	Boots with no additional configuration.
Trimslice Bare/Value Pro	pass	SD	pass	pass	pass	The Trimslice needs a Uboot upgrade to U-Boot 2012.04.01-1.01, a new boot script that changes the load address for the initramfs and a dtb.
Trimslice Pro/H/H250	pass	SATA	pass	pass	pass	The Trimslice needs a Uboot upgrade to U-Boot 2012.04.01-1.01, a new boot script that changes the load address for the initramfs and a dtb.
Highbank	warn	pass	pass	pass	N/A	Kernel crash after short period of use - Backtrace
Beagleboard XM

Hardware	Network	Display	Final Notes
Versatile Express (Qemu)	Disk Image	n/a	Install Failure - qemu-system-arm-1.2.2-6.fc18.x86_64
Pandaboard	SD
Trimslice Bare/Value Pro	SD
Trimslice Pro/H/H250	SATA
Highbank
Beagleboard XM