Software Collections (SCLs) give rpm packagers a means of packaging multiple versions of software for a single distribution. The version from the software collection does not interact with the system version. SCLs can provide backwards and forwards compat versions of a package compared to what's on the system.
SCLs are used to create a different platform than that which is shipped by the system. The platform may then be shipped on top different OS's and different OS releases
Definitions
Term | Definition |
---|---|
General | |
SCL | A Software Collection |
SCL Definition | The SCL Definition documents the platform the SCL establishes including the backwards compatibility guarantees for end users. This is also the form that needs to be submitted to the FPC to approve the SCL. |
Packages | |
SCL Metapackage (SRPM) | SRPM package that defines the SCL. Each SCL has exactly one of these. |
SCL Metapackage (RPM) | RPM built from the SCL Metapackage SRPM. Defines the essential packages you get when you install the scl. |
SCL Runtime Package | Built from the SCL Metapackage SRPM. Contains the SCL filesystem and essential scripts (usually just enable ) used to work with this SCL.
|
SCL Build Package | Built from the SCL Metapackage SRPM. Contains macro definitions needed to build packages for the collection. |
General SCL Package | Any binary RPM built for use within an SCL. The ones that establish the platform are mentioned in the SCL Definition. |
Mainstream Package | Package containing the software in Fedora that is not part of an SCL. |
SCL Approval
SCLs need to be approved on several levels:
- The SCL itself needs approval. At the moment we're rather strict about what can be an SCL so that we limit the number and types of SCLs. At least in this phase of getting SCLs into Fedora we want to avoid a proliferation of SCLs with only minor differences. This may be relaxed in the future.
- Each General SCL Package needs to be approved so that it meets the packaging guidelines.
SCLs are approved by the FPC. General SCL Packages are approved by packagers just like any other rpm package. The SCL Maintainers must own the General SCL Packages that are listed in the SCL Definition and thus both what packages are "officially" part of the SCL and the backwards compat guarantees for them. Additional General SCL packages not listed in the SCL Definition can be submitted and owned by any packager. They do not have to be specially approved by the SCL owners. They can not carry any official backwards compat guarantees.
SCL Criteria
There can be only one
For any given version of a software environment that satisfies the other requirements listed below there shall only be one SCL that provides the environment within Fedora. The version may overlap with the version provided by the mainstream Fedora package. Please remember to read the SCL Criteria: Version section to understand how version is being used here.
Size
The software ecosystem that an SCL targets must be of a moderate to large size. A language interpreter would satisfy this. A web framework would as well. In general, a single library would not. Use the standard backwards/forwards-compat packaging standards for those. (An exception to this would be alternate libc implementation, older boost versions and similar, very basic libraries).
In some cases, an application may also be deemed large enough to satisfy this requirement when the application itself is the major portion of an ecosystem. Servers like apache httpd which has an ecosystem of loadable modules and postgres which has programs linked against its client libraries are examples of this.
Version
SCLs are used to allow parallel versions of a software environment to be installed and used on the system. In Fedora we choose not to allow all versions to be parallel installed. Only when there is a compatibility break between versions do we have a new version packaged. As an example, we might allow an httpd2.4 scl and an httpd2.5 scl as modules written for httpd2.4 may need intrusive code changes to run with httpd2.5. We would not have an httpd2.5.0 scl and an httpd2.5.1 scl as httpd2.5.1 was intended as a bugfix release that does not require code changes (or even a recompile) in order for modules built for httpd2.5.0 to run on them.
Conflicts with non-SCLs and other SCLs
SCLs must not conflict with other packages on a filesystem level. They must follow the Conflicts Guidelines for use of the rpm Conflicts tag. They may Conflict with other packages in other ways but be sure to read the rest of this section to understand what you must do in those cases.
Conflicts between tcp and udp ports, plugins that provides a non-version-protected API (different versions of apache modules, for instance), and other non-filesystem conflicts may occur. These should not be marked using the rpm Conflicts tag as the person installing the packages can usually configure the packages to coexist with a bit of manual effort. A service in an SCL must not override a service started from a mainstream package. This is so that an already installed mainstream package does not get disabled by installing an SCL. At this time we do not make the same protection guarantee for SCLs being disabled by installing a mainstream package or a different SCL.
For standalone services like httpd, we implement this by not allowing those services to start by default. If a service should start by default when it is installed, it must be packaged as a mainstream package.
For add on modules (like mod_php), the service must either be configured to only load if the mainstream package is not installed or configured to not load at all without the user configuring it to do so.
Only for packages that aren't parallel installable
Some packages have accepted methods of being parallel installed. These packages must not be packaged as SCLs. Use the standard guidelines for parallel installing the packages instead. Taking a look at upstream, if and how other packages multiple versions of the software, existing Packaging Guidelines, and similar existing packages within the distribution can guide you in determining whether the package is parallel installable or not.
SCL Approval Process
SCLs are approved by the FPC in a process similar to that used for Fedora Changes. To make a request, copy the SCL Definition Template to a new page and fill it out. Then file an FPC ticket to have the FPC approve the SCL.
The SCL Defintion page documents the purpose of the SCL including the main package/stack that is being enabled by the SCL. SCLs must not target more than one main package/stack. (ie: rails3 and ruby1.9.3 would be two separate SCLs). Use inter-SCL dependencies for making one SCL depend on the platform provided by another.
Compatibility Guarantees
Each SCL can make compatibility guarantees. These set expectations for the user about what things they can expect to remain backwards compatible for the life of an SCL and what things they should use only if they are prepared to update their code if needed. The Compatibility Guarantees should list a set of the packages or libraries being provided by the SCL as things that won't change in a backwards incompatible manner. Compatibility Guarantees are per-SCL so an individual SCL may choose to list everything that they provide or or very little as having guaranteed backwards compat. At a minimum, the SCL must list a backwards compat guarantee that encompasses the version information encoded in the SCL metapackage's name. SCLs must also mention whether they are supporting the backwards compat guarantees that SCL's they depend on are making or if the SCL could change that. (For instance, if scl-rails3 depends on scl-ruby1.9.3 it must mention whether the SCL will always use ruby1.9.3 or if it could be targeted against a different version of ruby in the future.)
The SCL may choose to say they are going to maintain backwards compat even if that means backporting code or merely that they'll follow upstream's lead. For instance, an scl named scl-httpd2.4 may choose to write the following guarantee:
- httpd -- follow upstream's 2.4.x releases
which would allow the SCL to ship new 2.4.x releases even if upstream makes minor changes to the API. OTOH:
- httpd -- maintain backwards compatibility with 2.4.0
means the SCL maintainer should evaluate whether a new httpd-2.4.x release has made any changes that would be backwards incompatible before rebasing to a new upstream minor release. The important thing here is that the Compatibility Guarantees set the user's expectations and then the SCL maintainer follows them.
SCL maintainers should make every attempt to balance their ability to keep up with evaluating and pushing changes while maintaining a stable platform for people developing on top of their SCL when writing what guarantees they are willing to make.
The Guarantees are written down in two places: The SCL Definition form has a section that needs to list the guarantees being made. The SCL metapackage's %description also needs to list the guarantees so that a user can query the information from their system.
Changing a Guarantee
Compatiblity guarantees can be changed but it is discouraged. This can happen, for instance, if the maintainer of an SCL wants to orphan it and someone else steps in to take over. The new maintainer may want to either make a larger or a smaller compatibility promise when they take over. Within a Fedora release, compatibility guarantees can be changed to cover more packages but you cannot make the guarantees cover less packages or change what versions the compatibility guarantee is made against. Those changes can only occur between Fedora releases.
Changing the compatibility guarantee requires:
- Changing the SCL Definition to list the new compatibility guarantee. The document must continue to document what the old compatibility guarantee was and the Fedora version and SCL metapackage version at which the compatibility guarantee changed.
- Updating the SCL metapackage with the new compatibility guarantee in its %description
- These changes must go through a re-review of the SCL.
- The changes need to be published in the release notes for the fedora release that they are introduced in.
SCL Retirement
Planned Retirement
SCL Maintainers need to commit to supporting an SCL explicitly every cycle. This must be done by the Change Proposals Submission Deadline. If an SCL does not have a commitment to be maintained, the SCL will be retired and not branched for the next release. This gives people who depend on an SCL from 9 months to a year (depending on when the Change Proposal Submission Deadline is in relation to the previous Fedora release's EOL date) to port their software away from the old SCL.
Security Retirement
If an SCL has open security bugs that apply to the SCL version in rawhide and have been open for 2 months or more then the SCL will be retired in rawhide. For the purposes of this requirement, a bug against the SCL is defined as a bug against one of the general SCL packages that is mentioned in the compatibility guarantee or one of the packages that those packages depend upon.
A similar but less far reaching policy also applies to general SCL packages not needed to satisfy the compatibility guarantee. If one of those packages has a security bug opened against it for 2 months or more, that general SCL package and things that depend on it will be retired in rawhide.
To be clear, just like normal packages, retiring of scls and scl general packages in already released Fedora is not to be done except for package renames. provenpackagers will need to step in to try to deal with the security issues if they are bad enough. They should also institute the Nonresponsive maintainer policy on the packager so that the SCL/General SCL package is removed at the next Fedora release.
How to Retire
When an SCL is going to be retired the fact that it is no longer available needs to be in the release notes for the Fedora Release where it no longer appears. We also need to notify people that the SCLs are being retired. Typically, this will happen in an email to announce@lists.fedoraproject.org right after the Change Proposal Submission Deadline.
Naming the SCL
The SCL and the SCL metapackage are known by the same name. This name must make it unique from non-scl packages and also from scl packages that could be released by other vendors. Thus it is prefixed with a vendor string. In Fedora, the prefix is fdr-
. Following the prefix, the SCL must carry the name and version of the primary package being packaged. For instance, if this to be ruby at version 1.9.3 then the SCL metapackage would be named scl-ruby1.9.3
. All SCL packages within the SCL must carry the SCL metapackage base name as a prefix. So, for instance, the ruby interpreter package contained within the metapackage would be named scl-ruby1.9.3-ruby
.
Version and Release String
The SCL metapackage should use a simple integer starting with 1 as its version. SCL metapackages must use %{?dist}
in their release string. There are no other special rules about how the version and release should be determined. As these strings are purely Fedora creations (there's no "upstream tarball" for the SCL), please use common sense when deciding how to increment these strings.
SCL Metapackage
Every SCL must have an SRPM-level metapackage. This metapackage must build three binary rpm packages:
- One which has the same name as the SRPM metapackage. This RPM contains Requires to pull in the packages essential to this SCL.
- An
$SCLNAME-runtime
subpackage. This package needs to be installed if an end user intends to use the scl. - An
$SCLNAME-build
subpackage. This package contains rpm macros needed for building packages into the SCL. If it is installed, a spec file with SCL macros inside will be built as a General SCL Package for$SCLNAME
. If it is not installed, it will be built as a mainstream package.
An example SCL metapackage follows:
%global scl ruby1.9.3 %global _scl_prefix /opt/fedoraproject/scls # Note: this must be invoked *after* defining _scl_prefix %scl_package %scl %global install_scl 1 Name: %scl_name Version: 1 Release: 1%{?dist} Summary: Package that installs ruby1.9.3 License: GPLv2+ Requires: %{name}-runtime # List the packages essential for this SCL. Requires: %{scl_prefix}ruby BuildRequires: scl-utils-build %description This is the main package for the ruby1.9.3 Software Collection. [Provide some useful info about this SCL.] [List the Compatibility Guarantees being made here] %package runtime Summary: Package that handles %scl Software Collection Requires: scl-utils %description runtime Package shipping essential scripts to work with the ruby1.9.3 Software Collection. %package build Summary: Package shipping basic build configuration Requires: scl-utils-build %description build Package shipping essential configuration macros to build packages for the ruby1.9.3 Software Collection. %package scldevel Summary: Package shipping development files for %scl %description scldevel Package shipping development files, especially usefull for development of packages depending on %scl Software Collection. %prep %setup -T -c %build %install rm -rf %{buildroot} mkdir -p %{buildroot}%{_scl_scripts}/root cat >> %{buildroot}%{_scl_scripts}/enable << EOF export PATH=%{_bindir}\${PATH:+:\${PATH}} export LD_LIBRARY_PATH=%{_libdir}\${LD_LIBRARY_PATH:+:\${LD_LIBRARY_PATH}} export MANPATH=%{_mandir}:\${MANPATH} EOF %scl_install echo '%%_scl_prefix %_scl_prefix' >> %{buildroot}%{_root_sysconfdir}/rpm/macros.%{scl}-config %files %files runtime %scl_files %files build %{_root_sysconfdir}/rpm/macros.%{scl}-config %files scldevel %{_root_sysconfdir}/rpm/macros.%{scl_name_base}-scldevel %changelog * Fri Mar 30 2012 Bohuslav Kabrda <bkabrda@redhat.com> - 1-1 - Initial package.
Things to note here:
- The
-build
subpackage should include Requires: scl-utils-build.
- The enable script contains certain environment variable overrides so that programs and CLI interaction will use the files provided by the SCL. These are commonly overridden variables:
PATH=%{_bindir}\${PATH:+:\${PATH}}
to run SCL binariesLD_LIBRARY_PATH=%{_libdir}\${LD_LIBRARY_PATH:+:\${LD_LIBRARY_PATH}}
to properly link against SCL shared objectsMANPATH=%{_mandir}:\${MANPATH}
to be able to diplay manpages present in the SCLPKG_CONFIG_PATH=%{_libdir}/pkgconfig\${PKG_CONFIG_PATH:+:\${PKG_CONFIG_PATH}}
orPKG_CONFIG_PATH=%{_datadir}/pkgconfig\${PKG_CONFIG_PATH:+:\${PKG_CONFIG_PATH}}
to enable usingpkg-config
filesXDG_DATA_PATH=%{_datadir}\${XDG_DATA_PATH:+:\${XDG_DATA_PATH}}
to use systemtap tapsets from the SCL
- SCL metapackages must not be noarch. The filesystem directories contained in the metapackage may contain arch-specific paths.
- Among other things, the
%scl_install
macro creates a macro filemacros.%{scl}-config
(that ends up in the%{scl}-build
package). This file is always located at%{buildroot}%{_root_sysconfdir}/rpm/macros.%{scl}-config
. If you need to add some more macros specific for this SCL, add them into this file.
- Unlike in specfiles of normal SCL packages (see below), the metapackage doesn't need to conditionalize SCL specific macros, as it can only be used as a part of SCL (for example, instead of
Requires: %{?scl_prefix}foo
, use justRequires: %{scl_prefix}foo
- notice the missing questionmark, that makes the first macro conditional). - When user runs
yum install ruby193
, he expects that the whole SCL with all dependencies gets installed. Because of that, it should haveRequires
on all packages of that SCL, that are needed for the SCL to fulfil its purpose. E.g.yum install ruby193
definitely has to install Ruby 1.9.3, but it needn't install collection packages that were used to build the interpreter (and that are not needed at Ruby runtime).
SCL Prefix (proposal - not part of draft)
Proposal 1
- Use /opt/$vendor/scls/$sclname/ for the main part of the scl package. This loosely replace /usr/ in a mainstream package
- /var/opt/$vendor/scls/$sclname/ for the variable state. This replaces /var/ (thus, there would be /var/opt/$vendor/scls/log, /var/opt/$vendor/lib, and so on)
- /etc/opt/$vendor/scls/$sclname/ for config files. This replaces /etc/
- Have spot register fedoraproject or fdr with the Linux Assigned Names and Numbers Authority and use that as $vendor http://www.lanana.org/lsbreg/providers/index.html
- Third party scls go in /var/opt/$vendor2/scls
Proposal 2
- Use %{_prefix}/scls/$sclname/
- /var/lib/scls/$sclname/
- /etc/scls/$sclname/
- SCL names must contain a vendor string. So rht-ruby1.9.3 for a ruby package provided by Red Hat. fdr-ruby1.9.3 for one provided by the fedoraproject.
- Third party scls end up in %{_libdir}/scls/$sclname but we're willing to accept that since collisions are protected against by good vendors putting the vendor string in the package name.
General SCL Package
This section sums up the steps needed to take in order to convert a normal specfile to SCL specfile step by step.
Bits and Bobs
The scl_prefix has to be defined in order to get an SRPM that matches with the package actually being built. Possibilities:
Add this to the top of the spec file:
%global scl_prefix fdr-python2.4-
I don't like this as it means each scl-spec file would have to modify this for use in other scls.
Modify %scl_package to set scl_prefix even if the scl_build package isn't installed. Seems reasonable from a Fedora perspective as all the information is in the spec file already (scl_package is given the scl name as an argument so it seems okay. But for people that want to share the spec file between scl builds and non-scl builds I'm not sure if this is going to work.
Modify fedpkg to define the scl_prefix when building in scl branches. And document that invoking rpmbuild -bs manually requires using --define scl_prefix=fdr-python2.4-
Converting Tags and Macro Definitions
Every SCL specfile must have %scl_package
macro specified. This macro does this:
- Rewrites the standard path macros by prefixing them with
%{_scl_prefix}/%{scl}/root/
. E.g.%{_datadir}
changes (depending on value of%_scl_prefix
) from/usr/share
to e.g./opt/fedora/myscl/root/usr/share
. - Introduces some SCL specific macros (like
%pkg_name
,%scl_prefix
or%_root_*
set of macros, that contain values of the original RPM macros (e.g.%_root_datadir
contains/usr/share
).
One of the important macros is %pkg_name
, which represents the original mainstream package name. During a General SCL Package build the %name
macro includes the name with SCL prefix so using %pkg_name
instead becomes important. You may also define %pkg_name
macro for non-SCL builds, to be able to use it consistently throughout the whole specfile.
So here is what the first two lines should look like:
%{?scl:%scl_package ruby} %{!?scl:%global pkg_name ruby}
Usual steps to adapt tag definitions for SCL builds are these:
- Name must be modified like this:
-Name: ruby +Name: %{?scl_prefix}ruby
- Requires and BuildRequires have to be considered carefully. These depend on what you are building/linking with and it is your decision as a packager. The only rule here is, that if building/linking with other SCL packages, their names must be also prefixed with conditionalized macro
%{?scl_prefix}
like this:
-Requires: bar +Requires: %{?scl_prefix}bar
- For example, since ifconfig is a binary, we're going to use its system version, which means not using
%scl_prefix
with it. rubygem-foo, on the other hand, has to be in the path of the Ruby interpreter which will be part of this SCL, therefore it needs to be used with%scl_prefix
. When depending on system packages, you should be very general in your requirements (avoid using versioned Requires on specific versions) and if you need a package that might be updated, you have to either add it to your SCL or be willing to rebuild the SCL when the system package updates.
Requires ifconfig -Requires: rubygem-foo = 1.0.0 +Requires: %{?scl_prefix}rubygem-foo = 1.0.0 BuildRequires: ifconfig -BuildRequires: rubygem-foo = 1.0.0 +BuildRequires: %{?scl_prefix}rubygem-foo = 1.0.0
affe
- Obsoletes, Conflicts and BuildConflicts must either be deleted or prefixed with
%{?scl_prefix}
. This is extremely important as SCLs are supposed to create an isolated environment that doesn't affect the main system. If the Obsoletes remained and the general SCL package was deployed to an older systems that may contains old packages mentioned in theObsoletes:
orConflicts:
then the general SCL package would cause those packages to be removed from the main system. Examples of dealing with these:
-Obsoletes: foobar < 1.0 # Add %{?scl_prefix}. This would Obsolete the foobar package as built for the SCL. +Obsoletes: %{?scl_prefix}foobar < 1.0 # You can also simply remove the Obsoletes altogether when the mentioned package # has never been built for the SCL -Obsoletes: baz < 1.0
- Provides tag must always be prefixed with
%{?scl_prefix}
. For example:
-Provides: foo(bar) +Provides: %{?scl_prefix}foo(bar)
- All the other tag definitions should be unchanged, unless they contain
%{name}
macro, which may need to be substituted for%pkg_name
(for example in SourceN tag, where it may be a part of URL). - There are some additional tags you should add. The package must require
%{scl}-runtime
, unless it depends on another package that requires%{scl}-runtime
.- Here is a rule of thumb: If packaging SCL with a language interpreter, like Ruby or Python, typically all other packages in the SCL depend on the interpreter. Therefore it is sufficient when only the interpreter runtime package requires
%{scl}-runtime
. Generally, every SCL package that can be installed on its own (without other packages from this SCL) should require the%{scl}-runtime
package. - The line to add is:
- Here is a rule of thumb: If packaging SCL with a language interpreter, like Ruby or Python, typically all other packages in the SCL depend on the interpreter. Therefore it is sufficient when only the interpreter runtime package requires
%{?scl:Requires %{scl}-runtime}
Subpackages
The same rules as for normal tags apply for subpackages tags. The only thing needs to be changed:
If (and only if) a package define its name with -n
, the name must be prefixed with %{?scl_prefix}
like this:
-%package -n foo +%package -n %{?scl_prefix}foo
This applies not only to %package
macro, but also for %description
and %files
.
If the subpackages Require the main package, those lines will also need adjusting to use %{pkg_name}
.
Inter-SCL Dependencies
Available from scl-utils version 20120613.
There are situations where packages from an SCL have to depend on packages from another SCL. While using simple [Build]Requires: rails323-rubygem-rails
is possible, it is not the wisest thing to do, since it hardcodes the information about how %{?scl_prefix}
gets expanded. If the expansion of this macro was changed (for example from rails323-
to scl-rails-323
, all the packages using such dependencies would need to be manually altered and rebuilt.
The scl-utils package therefore provides two ways of inter-SCL dependencies using macros. Note that both of them are in fact functions, so they need to be invoked without the curly braces to work properly:
%scl_require foo
macro is used to depend on the whole SCL. This is used if you want to use a functionality of an SCL, no matter what packages that SCL will install along the way. For example, therails323
SCL contains the whole Ruby on Rails stack in version 3.2.3. If packaging an SCL that requires the whole Rails stack, you can simply use%{?scl:Requires: %scl_require rails323}
.%scl_require_package foo pkg
provides the ability to depend on a specific package from another SCL. For example, if your package needs rubygem-minitest package fromrails323
SCL, you can simply use%{?scl:BuildRequires: %scl_require_package rails323 rubygem-minitest}
. Installing the whole Rails stack in this case would be useless (and since rubygem-minitest is only a build dependency, it's not drawn in by default).
You can specify versioned Requires like this: %{?scl:BuildRequires: %{scl_require_package rails323 rubygem-minitest} = 1.0.0}
Note that both of these macros abstract from the way that %{?scl_prefix}
expands. Therefore, if any changes were made, a simple rebuild with new versions of SCL utils would be sufficient.
When specifying inter-SCL dependencies, these macros must be used.
Inside RPM Scripts
It is not possible to describe the general process of rewriting %prep
, %build
, %install
, %check
and the %pre*
and %post*
scripts. There are however some general rules:
- Substitute all occurencies of
%name
for%pkg_name
. Most importantly, the%setup
macro will need the-n
argument for SCL builds (thanks to%pkg_name
, we can use the same for non-SCL builds). Due to this, the%setup
macro must always be used:
-%setup +%setup -n %{pkg_name}-%{version}
- If using a
%_root_*
macro to point to the original filesystem, you must conditionalize it, so that the package can be rebuilt for non-SCL use:
-mkdir -p %{_sysconfdir} +mkdir -p %{?scl:%_root_sysconfdir}%{?!scl:%_sysconfdir}
- If building SCL packages that depend on other SCL packages, you might need the
scl enable
functionality to link properly/run proper binaries, etc. It is not generally possible to say where this will be needed, but an example might be compiling against an SCL library or running an interpreted script with the interpreter in SCL:
+%{?scl:scl enable %scl - << \EOF} ruby foo.rb RUBYOPT="-Ilib" ruby bar.rb # more stuff +%{?scl:EOF}
- All hardcoded paths (such as
/usr/share
) must be replaced with proper macros (%{_datadir}
in this case).
Files
The files section is usually OK as it is. The only adjustments needed are for the names of subpackages (see Subpackages) and possible of some path macros with their %_root_*
alternatives (this is determined by what you do in the scripts, see Inside RPM Scripts.
Dealing With Automatic Provides/Requires and Filtering
RPM has some automatic Provides/Requires searching capabilities as well as filtering capabilities. For example all Python libraries have an automatically added Requires: python(abi) = (version)
(and in SCL, the proper way to have this is Requires: %{?scl_prefix}python(abi) = (version)
). The scripts that search for these dependencies must sometimes be rewritten for SCL, as the original RPM ones are not extensible enough (and in some cases, filtering is not usable). This is the example of rewriting Python provides and requires (the following lines can be placed into the macros.%{scl}-config
):
%__python_provides /usr/lib/rpm/pythondeps-scl.sh --provides %{_scl_root} %{scl_prefix} %__python_requires /usr/lib/rpm/pythondeps-scl.sh --requires %{_scl_root} %{scl_prefix}
The pythondeps-scl.sh
is a file created from pythondeps.sh
by adjusting some search paths.
If there are some Provides/Requires, that you need to alter (for example pkg_config
provides), there are two ways to do it.
- Either with the following lines in
macros.%{scl}-config
(this will then apply to all packages built in the SCL):
%_use_internal_dependency_generator 0 %__deploop() while read FILE; do /usr/lib/rpm/rpmdeps -%{1} ${FILE}; done | /bin/sort -u %__find_provides /bin/sh -c "%{?__filter_prov_cmd} %{__deploop P} %{?__filter_from_prov}" %__find_requires /bin/sh -c "%{?__filter_req_cmd} %{__deploop R} %{?__filter_from_req}" # Handle pkgconfig virtual [provides/requires]. %__filter_from_req | %{__sed} -e 's|pkgconfig|%{?scl_prefix}pkgconfig|g' %__filter_from_prov | %{__sed} -e 's|pkgconfig|%{?scl_prefix}pkgconfig|g'
- Or in every single specfile that you want to filter Provides/Requires in, place following lines after tag definitions:
%{?scl:%filter_from_provides s|pkgconfig|%{?scl_prefix}pkgconfig|g} %{?scl:%filter_from_requires s|pkgconfig|%{?scl_prefix}pkgconfig|g} %{?scl:%filter_setup}
Filters don't work in EL-6, because rpm is using different filter mechanism, as mentioned in RHBZ#1001674. Consult EPEL:Packaging_Autoprovides_and_Requires_Filtering if you need to do dependency filtering in EPEL.
Dealing With Macro Files
Sometimes the package ships with macro files, that go into /etc/rpm
(in SCL terms, they go into %{?scl:%{_root_sysconfdir}}%{!?scl:%{_sysconfdir}}
). This is fine, if two conditions are met:
- The macro files must be renamed by appending
.%{scl}
to their name, so that they don't conflict with system files. - The defined macros must be present in a form, that doesn't break any macros from non-SCL packages (with exception of macros from
%{scl}-build
subpackage, as mentioned below).
The second rule means, that macros in macro files must be unexpanded or be properly conditionalized. This is fine:
# the %gem_docdir macro depends on a macro that may be redefined by a collection and thus is ok %gem_docdir %{gem_dir}/docs # the %python2_sitelib macro evaluates depending on whether we build for collection or not and thus is ok %python2_sitelib %(%{?scl:scl enable %scl '}%{__python2} -c "from distutils.sysconfig import get_python_lib; print(get_python_lib())"%{?scl:'})
and this is not fine:
# the %gem_dir macro hardcodes collection path and thus would break non-SCL builds, which is not ok %gem_dir /opt/fedora/ruby193/root/usr/share/gems # the %python2_sitelib macro would run "scl enable" everytime, so if the collection would redefine %__python2, this would not work for non-SCL builds %python2_sitelib %(scl enable %scl '%{__python2} -c "from distutils.sysconfig import get_python_lib; print(get_python_lib())"')
Macros and Depending Collections
Now consider a situation where you need to create collection mypython
that depends on python26
collection that defines macro %{__python2}
in a way shown above. The macro will evaluate to /opt/<provider>/mycollection/root/usr/bin/python2
, but the python2
binary is not in your collection, but in python26
- this means nothing can be built in depending collection now. When you need to follow this use-case, here is what you need to do:
- In
macros.python.python26
(part of python26-python-devel), define
%__python26_python2 /opt/<provider>/python26/root/usr/bin/python2
- And in macros file in
python26-build
and any depending collection's%{scl}-build
use:
%scl_package_override() {%global __python2 %__python26_python2}
This will redefine the %{__python2}
macro only if such %{scl}-build
package is present (which usually means that you want to build for the collection and don't mind breaking the macro for local non-SCL builds).
Dealing With Shebangs
Shebangs have two important aspects: they are processed by the automatic dependency processor and they point to a certain (possibly non-SCL location).
As one of its functions, the automatic dependency processor goes through the shebangs. And adds dependencies according to the binaries they point to. From the SCL point of view, there two types of shebangs:
/usr/bin/env foo
- 'auto-dependency generation' point of view: The resulting package will depend on
/usr/bin/env
, which is not a problem. - 'pointing to non-SCL location' point of view: If the
$PATH
is redefined properly in the enable scriptlet, thefoo
binary is found in the SCL hierarchy, so not a problem either. - But you generally should avoid this. Packages that belong into collection should make sure that they invoke collection binaries, so they should hardcore full path to them in shebangs.
- 'auto-dependency generation' point of view: The resulting package will depend on
/usr/bin/foo
- 'auto-dependency generation' point of view: The resulting package will depend on
/usr/bin/foo
(part of non-SCL package), but we may have wanted to depend on%{?_scl_root}/usr/bin/foo
when building for SCL. - 'pointing to non-SCL location' point of view: The
$PATH
redefinition has no effect, the/usr/bin/foo
binary is still used (which is probably not what was intended). - If you have some shebangs like this in the specfile and the should point to SCL locations when built for SCLs, you can use similar command to adapt them:
- 'auto-dependency generation' point of view: The resulting package will depend on
find %{buildroot} -type f | \ xargs sed -i -e '1 s"^#!/usr/bin/foo"#!%{?_scl_root}/usr/bin/foo"'
Building Packages
The converted packages should be buildable both in SCL and non-SCL buildroots. This means, that after correct conversion of the specfile, build in non-SCL buildroot will produce standard system RPMs and build in buildroot containing %{scl}-build will produce SCL packages.
Before building in mock, you will want to create SRPMs. The process here is standard - if the SCL macroes are properly conditionalized, everything will work even without the SCL metapackage and scl-utils-build
installed locally. However, for the build of the metapackage itself, you will need scl-utils-build
, otherwise rpmbuild
will be unable to parse the macros inside it.
For testing the SCL builds in mock (you will get the same environment in BREW), you have to create a standard config file with few adjustments (let's say that you are building SCL named ruby193
):
- Use
'install @build scl-utils-build ruby193-build'
forconfig_opts['chroot_setup_cmd']
. - Add a local repo with your builds of the SCL packages to the mock config file:
[ruby193] name=ruby193 enabled=1 baseurl=file:///home/bkabrda/ruby193/repo cost=0 metadata_expire=0
Testing non-SCL builds is done in normal mock configurations (obviously :) ).