It is still under construction and content may change. Do not rely on the information on this page.
Fedora 26 for ARM
Today the Fedora Project is pleased to announce the general release of Fedora 25. Download it now from our Get Fedora site:
Overview of Hardware Support Status
Raspberry Pi 2/3
Fedora 25 includes support for the Raspberry Pi 2/3! For full details and installation instructions, please visit:
Make Fedora Even Better
If you want to take an active hand in making Fedora even better, there are many ways you can contribute. There are many roles that you can participate. Visit http://whatcanidoforfedora.org/ for more information! While this is a general release, there is always a chance you may encounter bugs or missing features. To report issues encountered during testing, contact the Fedora QA team via the mailing list or in #fedora-qa on Freenode IRC. As testing progresses, common issues are tracked on the Common F25 Bugs page.
For tips on reporting a bug effectively, read "how to file a bug report."
Download the Disk Image & Copy to Media
The image-based installation process involves downloading an image file (depending upon desktop/non-desktop option desired), inserting removable media into a "host" system (e.g. an ARM or x86_64 PC class desktop, laptop, etc.) and performing a few simple commands to write this image onto the media. This media is then used by the ARM "target" system to boot the Fedora 25 environment.
After writing the image and correct U-boot file(s), insert the media into the target platform and boot.
Fedora Arm Installer
The examples provided here are from a Fedora 22/23/24 host and may need to be adjusted depending on your host environment.
Execute the following script as a user with sudo privileges. It will copy the selected disk image and write the appropriate U-Boot for the target hardware platform. Optionally you can also enable and disable SE Linux and remove the root password requirement (allowing log in without completing initial setup). To add a board not listed, simply create a bash scriptlet with the commands needed to copy U-Boot to media and add to the 'boards.d' directory.
sudo dnf install fedora-arm-installer
Usage: fedora-arm-image-installer <options> --image=IMAGE - xz compressed image file name --target=TARGET - target board --media=DEVICE - media device file (/dev/[sdX|mmcblkX]) --selinux=ON/OFF - Turn SELinux off/on as needed --norootpass - Remove the root password -y - Assumes yes, will not wait for confirmation --version - Display version and exit --resizefs - Resize root filesystem to fill media device --addconsole - Add system console to extlinux.conf Example: fedora-arm-image-installer --image=Fedora-Rawhide.xz --target=Bananapi --media=/dev/mmcblk0 --selinux=OFF
For list of supported targets see SUPPORTED-BOARDS from documentation
In some packages, SUPPORTED-BOARDS file is missing. In that case list directory /usr/share/arm-image-installer/boards.d/ to see what boards are supported.
$ cat /usr/share/doc/fedora-arm-installer/SUPPORTED-BOARDS
AllWinner devices:
A10-OLinuXino-Lime A10s-OLinuXino-M A13-OLinuXino A13-OLinuXinoM
A20-OLinuXino-Lime A20-OLinuXino-Lime2 A20-OLinuXino_MICRO
A20-Olimex-SOM-EVB Ampe_A76 Auxtek-T003 Auxtek-T004 Bananapi Bananapro CHIP
CSQ_CS908 Chuwi_V7_CW0825 Colombus Cubieboard Cubieboard2 Cubietruck
Cubietruck_plus Hummingbird_A31 Hyundai_A7HD Itead_Ibox_A20 Lamobo_R1
Linksprite_pcDuino Linksprite_pcDuino3 Linksprite_pcDuino3_Nano MK808C
MSI_Primo73 MSI_Primo81 Marsboard_A10 Mele_A1000 Mele_A1000G_quad Mele_I7
Mele_M3 Mele_M5 Mele_M9 Mini-X Orangepi Orangepi_mini Sinlinx_SinA31s
UTOO_P66 Wexler_TAB7200 Wits_Pro_A20_DKT Yones_Toptech_BS1078_V2
ba10_tv_box colorfly_e708_q1 difrnce_dit4350 dserve_dsrv9703c i12-tvbox
iNet_86VS icnova-a20-swac inet86dz jesurun_q5 mk802 mk802_a10s mk802ii
orangepi_2 orangepi_lite orangepi_pc orangepi_plus polaroid_mid2809pxe04
pov_protab2_ips9 q8_a13_tablet q8_a23_tablet_800x480 q8_a33_tablet_1024x600
q8_a33_tablet_800x480 r7-tv-dongle sunxi_Gemei_G9
MX6 devices:
cm_fx6 mx6cuboxi novena riotboard wandboard
TI devices:
am335x_boneblack am57xx_evm kc1 omap3_beagle omap4_panda omap5_uevm
MVEBU devices:
clearfog
Other devices:
jetson-tk1 trimslice rpi2 rpi_3_32b
For Versatile Express Emulation with QEMU
No ARM hardware? No problem! Even without hardware, it is possible to run the Fedora for ARM images using the QEMU emulator program. Any image can be used, and you can choose a scr ipt method or manual depending on your preference.
Using an Existing Disk Image
Choose a disk image.
http://download.fedoraproject.org/pub/fedora/linux/releases/25/Spins/armhfp/images/
Extract the image:
TYPE= # Type of image used. (eg Minimal, KDE, Xfce, SoaS, MATE) unxz Fedora-$TYPE-armhfp-25-1.3-sda.raw.xz
Install 'libguestfs-tools' to use virt-builder:
sudo dnf install -y libguestfs-tools
Extract the kernel and initramfs for use with booting.
virt-builder --get-kernel Fedora-$TYPE-armhfp-25-1.3-sda.raw
Move the files to the default libvirt image location:
sudo mv Fedora-$TYPE-armhfp-25-1.3-sda.raw vmlinuz-4.8.6-300.fc25.armv7hl initramfs-4.8.6-300.fc25.armv7hl.img /var/lib/libvirt/images/
Using Virt-Manager (Graphical )
- Start virt-manager, connect to 'QEMU', click the 'New VM' icon
- On the first page, under 'Architecture Options' select 'arm'. The 'virt' machine type should be selected automatically
- Select the 'Import install' option, go to the next page
- Browse to the disk image, kernel, and initrd we moved in the previous step.
- Set kernel args as: console=ttyAMA0 rw root=LABEL=_/ rootwait
- Set the OS as Fedora 22.
- Continue with the OS defaults, complete the install.
The guest should shortly start booting, and you should see text console output. After a bit of a wait, it should hit a text mode 'initial setup' where you can set a root password. To boot (you will need to determine the kernel version used in the disk image):
Using 'virt-install' (command line)
sudo virt-install \
--name Fedora-$TYPE-armhfp-25 --ram 2048 --arch armv7l --import --os-variant fedora22 \
--disk /var/lib/libvirt/images/Fedora-$TYPE-armhfp-25-1.3-sda.raw \
--boot kernel=/var/lib/libvirt/images/vmlinuz-4.8.6-300.fc25.armv7hl,initrd=/var/lib/libvirt/images/initramfs-4.8.6-300.fc25.armv7hl.img,kernel_args="console=ttyAMA0 rw root=LABEL=_/ rootwait"
Expanding the Disk Image
You can easily expand the root partition of the disk image using qemu-img.
For example to increase the image size by 10GB you can issue:
qemu-img resize Fedora-$TYPE-armhfp-25-1.3-sda.raw +10G
Interactive Network Installation
This example will create an 8Gb disk image in the libvirt images directory.
sudo virt-install \
--name f25-armhfp --ram 2048 --arch armv7l --os-variant fedora22\
--disk /var/lib/libvirt/images/f25-armhfp.raw,bus=virtio,format=raw,size=8 \
--location=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/Everything/armhfp/os/ \
--extra-args="console=ttyAMA0 rw"
Complete a Text or VNC Installation choosing a software packge and partitioning scheme. The system will attempt to reboot but fail until the next step is completed.
Virt-Manager
- Open Virt-Manager and select the image created above. Click on "Edit-> Virtual Machine Details -> View -> Details"
- Under "Boot Options", add the kernel, initramfs
- Use virt-cat to get the appropriate kernel args.
sudo virt-cat -a /var/lib/libvirt/images/f25-armhfp.raw /boot/extlinux/extlinux.conf
Booting for the First Time
Initial-setup
- During the first boot the system will launch the 'initial-setup' utility. For graphical images this will occur on the display, for minimal images this will occur on the serial console. Failure to complete the initial-setup will prevent logging into the system. To log in to the root account without completing the initial-setup you will need to minimally edit '/etc/passwd' file and remove the 'x' from the line beginning with 'root' (this will allow you to log into the root account without entering a password).
- NOTE - currently there is a timing issue with initial-setup, even though a display is connected, it may be run as text on the serial console. This is often resolved by rebooting the system.
Resize the Root Filesystem
To resize the root partition use 'gparted' on a Fedora host.
Upgrade using DNF
It is also possible to upgrade to Fedora 25 from an existing Fedora 23 installation (NOTE: This is not well tested prior to, and may not work for all hardware. Tested on Calxeda Highbank. Previous releases may also work but have not been tested).
# fully update the system sudo dnf update -y # install the upgrade plugin sudo dnf install dnf-plugin-system-upgrade # upgrade sudo dnf system-upgrade download --releasever=25
Known Issues & Usage Tips
- Display is not currently working in vexpress emulation.
- On some hardware, initial setup runs on serial console (initial-setup-text) rather than graphical on Desktop enabled images. If no serial console is available, restarting the system may start the graphical version. Removing the symlink for initial-setup-text will ensure the correct version is run.
- Pandaboard requires 'cpuidle.off=1' on the kernel args. Please edit the extlinux.conf and add this or the system will not boot.
For a list of all common bugs please visit - http://fedoraproject.org/wiki/Common_F25_bugs .
FAQ
- How do I use Fedora ARM when I have no serial cable or display?
- Though not recommended it is possible to use Fedora ARM without a serial cable or display. When doing so you may want to limit updates to reduce the possibility of not being able to boot. (This example is from a Fedora 22 system, you may need to adjust the mounts used).
USER= # your user account sudo rm /run/media/$USER/__/etc/systemd/system/graphical.target.wants/initial-setup-graphical.service #only needed for Desktop images sudo rm /run/media/$USER/__/etc/systemd/system/multi-user.target.wants/initial-setup.service sudo mkdir /run/media/$USER/__/root/.ssh/ cat /home/$USER/.ssh/id_rsa.pub | sudo tee -a /run/media/$USER/__/root/.ssh/authorized_keys sudo chmod -R u=rwX,o=,g= /run/media/$USER/__/root/.ssh/
Give the system a few minutes to boot, when it obtains an IP you should be able to ssh to the root account.
- Why does 'yum update' fail? :
- The system time might be incorrect, please ensure it is correct.
- How do I enable hardware virtualization on the Jetson TK1?
- At a U-Boot prompt enter 'setenv bootm_boot_mode nonsec; saveenv'. Then boot using an LPAE kernel.
- How do I enlarge the root partition?
- The images include cloud-utils-growpart to enlarge the root partition, then resize2fs to use that newly available space.
# enlarge the 4th partition (this example uses mmcblk0) growpart /dev/mmcblk0 4 # grow the fileystem to fill the available space resize2fs /dev/mmcblk0p4 # for the server image (which uses xfs) xfs_growfs /dev/mmcblk0p4
Copying Fedora U-Boot to eMMC on the Beaglebone Black
To Copy the Fedora U-Boot to the eMMC on the Beaglebone Black execute the following steps:
# mount emmc boot partition
mkdir /tmp/emmc; mount /dev/mmcblk1p1 /tmp/emmc
# optionally back up original U-Boot
mkdir /tmp/emmc/orig-uboot; cp /tmp/emmc/{MLO,u-boot.img} /tmp/emmc/orig-uboot/
# copy Fedora U-Boot
cp /usr/share/uboot/am335x_boneblack/{MLO,u-boot.img} /tmp/emmc/
Once completed you will no longer need to press the "User Boot" button to select the Fedora U-Boot.