Architectures/ARM/Fedora Linux 35

Fedora Linux 35

Kernel: 5.14.10-300.fc35
Uboot : uboot-tools-2021.10-2.fc35

Hardware Status

Below is a list of Hardware tested for Fedora 35. If your device is missing, please feel free to update the hardware status below.

ARMv7hl

Hardware	Serial Console	USB	Wired Network	Display	Wi-Fi	Bluetooth	Audio	Notes
Arndale	pass	pass	pass				pass	Recommended image: Minimal
Banana Pi	pass	pass	pass	fail	warn	none	none	Recommended image: Minimal Wireless device shows up but the signal is poor, results may vary.
BeagleBoneBlack	none	none	none	none	none	none	none	Recommended image:
BeagleBoneWhite	pass	pass	pass					Recommended image: Minimal. To run dnf a swapfile is required. Partition 1 needs to be moved forward to write U-boot.
Cubietruck	pass	pass	pass	pass	warn	none	none	Recommended image: Server or Minimal Wireless device shows up but the signal is poor, results may vary.
Pandaboard	pass	pass	pass	pass			none	Recommended image: Xfce or Minimal
Raspberry Pi 2	pass	pass	pass	pass			pass	Recommended image: Xfce, Server, Minimal or Fedora IoT Edition. Desktop images require 'cma=192M' added to kargs
Raspberry Pi 3	pass	pass	pass	pass	pass	none	pass	Recommended image: Xfce, Server, Minimal or Fedora IoT Edition. Desktop images require 'cma=192M' added to kargs
Raspberry Pi 4	pass	pass	pass	pass	pass	fail	fail	Recommended image: Xfce, Server, Minimal or Fedora IoT Edition. The Raspberry Pi 4 needs to be limited to 1Gb of RAM to boot the armhfp disk images initially- this also stop USB from work so you will need to SSH to the machine to install the kernel-lpae package. The RAM limitation can then be removed and USB should work.
Raspberry Pi 400	warn	pass	pass	pass			fail	Recommended image: Xfce, Server, Minimal or Fedora IoT Edition. The RPi400 fails to boot with the kernel provided dtb. To boot successfully delete the symlink '/boot/dtb'.
Jetson TK1	none	none	none	none	none	none	none	Recommended image:
Wandboard Quad	pass	pass	fail	pass			none	Recommended image: Xfce or Minimal. Desktop images require 'cma=192M' added to kargs

• Desktop image requires 'cma=192M' added to kargs

AArch64

Hardware	Serial Console	USB	Wired Network	Display	Wi-Fi	Bluetooth	Audio	Notes
Firefly2	pass	warn	pass	pass			none	Recommended image: Workstation, Xfce or Minimal Reported issues with onboard network, results may vary.
Jetson Nano	none	pass	pass	pass			pass	Recommended image: Workstation, Xfce or Minimal
Jetson NX	pass	pass	pass		pass	pass		Recommended image: Installation with PXE or USB.
Pine 64 Plus	pass	pass	pass	pass	fail	fail	fail	Recommended image: Workstation, Xfce, Server, Minimal or Fedora IoT Edition. The NIC works reliably with kernel 5.14.14-300.fc35 in RC image. WiFi and BT of official expansion module don't work. No audio from neither HDMI nor 3.5mm jack.
PineBook Pro	none	pass		pass	warn		fail	Recommended image: Workstation or Xfce Needed for working WiFi. U-Boot installation instructions
SolidRun Honeycomb (UEFI + ACPI)	pass	pass	warn	warn	none	none	none	Recommended image: Server, Workstation Note smmu parameter and udev rule for networking GT-710 or similar PCIe graphics, for Workstation
SolidRun MACCHIATObin (UEFI + ACPI)	pass	pass	pass	warn	none	none	none	Recommended image: Server, Workstation GT-710 or similar PCIe graphics, for Workstation
ThunderX2	pass	pass	pass	pass	none	none	none	Recommended image: Server, Workstation GT-710 or similar PCIe graphics, for Workstation Tested with ACKL021 firmware
Raspberry Pi 3	pass	pass	pass	pass	pass	pass	pass	Recommended image: Xfce, Server, Minimal or Fedora IoT Edition. Desktop images require 'cma=192M' added to kargs
Raspberry Pi 4	pass	pass	pass	pass	pass	pass	pass	Recommended image: Workstation*(using Xorg), Xfce, Server, Minimal or Fedora IoT Edition. GUI frequently locks up when using Wayland on the Workstation Edition. Switching to Xorg is recommended.
Raspberry Pi 400	pass	pass	pass	pass			pass	Recommended image: Workstation*(using Xorg), Xfce, Server, Minimal or Fedora IoT Edition. GUI frequently locks up when using Wayland on the Workstation Edition. Switching to Xorg is recommended.

Tips & Tricks

This section includes various tips and tricks used to tweak performance on arm systems.

• Disable modularity:

  sed -i 's/enabled=1/enabled=0/' /etc/yum.repos.d/fe*mod*

• Don’t install weak dependencies:

  echo "install_weak_deps=False" >> /etc/dnf/dnf.conf

• Disable dnf makecache:

  systemctl disable dnf-makecache; systemctl mask dnf-makecache

Common Bugs

For common bugs and issues reported in Fedora Linux 35, please visit the Common bugs page.