Architectures/PowerPC/Fedora 22 PowerPC installation: Difference between revisions

Revision as of 13:25, 13 May 2015

Which tests to run

Test coverage page
This page provides information about test coverage for the tests on this page across all the composes for the current release: it can help you see which test cases most need to be run.

Tests with a Milestone of Alpha, Beta or Final are the most important. Optional tests are less so, but still useful to run. The milestone indicates that for that milestone release or a later one to be approved for release, the test must have been run against the release candidate build (so at Beta, all Alpha and Beta tests must have been run, for instance). However, it is important to run the tests for all milestones as early and often as possible. Please refer to the test coverage page linked above and try to find and run tests which have not been run at all, or not run recently, for the current release.

How to test

1. Download one or more media for testing:

Image	ppc64	ppc64le
server dvd	Alpha_RC6 Beta_TC2 Beta_RC1 TC2	Alpha_RC6 Beta_TC2 Beta_RC1 TC2
server netinst	Alpah-RC6 Beta_TC2 Beta_RC1 TC2	Alpah-RC6 Beta_TC2 Beta_RC1 TC2
server boot
cloud dvd	Beta_TC2 Beta_RC1	Beta_TC2 Beta_RC1
cloud netinst	Beta_TC2 Beta_RC1 TC2	Beta_TC2 Beta_RC1 TC2
cloud boot

2. Perform one or more of the test cases and add your results to the table below

You can submit results by editing the page directly for reporting test results.

3. If a test fails, file a bug report. You may propose the bug as a release blocker or freeze exception bug for the appropriate release - see blocker bug process and freeze exception bug process.

Tracker bugs

Some tests must be run against particular Products or images - for example, the #Default boot and install tests. If no particular product or image is specified either in this page or the test case page, you can use any appropriate image. For example, you can run most of the #General Tests with the Server install images.

For nightly compose testing, use the network install images linked above for Server tests. Cloud and non-Product live and disk images should be available from Koji via the searches linked above.|Delta_ISOs for Server offline installer images are available here. If you have the Server offline install image for the previous TC/RC (or in the case of Alpha TC1, the previous stable release), you can generate the current install image with greatly reduced download size.}}

If you notice a problem during a test which does not constitute a complete failure of the test, you should still file a bug report, but it may not be appropriate to propose it as a release blocker bug. Use your judgment in deciding this, with reference to the Fedora_Release_Criteria, which these tests are intended to verify. If you are unsure, err on the side of proposing the bug as a blocker.

Don't install updates
Don't install updates before performing any of the tests, as when you are testing pre-releases, available updates are not part of the proposed released package set.

Virtual machine testing
In most cases, testing in a virtual machine is OK.

Key

See the table below for a sample format for test results. All test results are posted using the result template.

Test Result	Explanation	Code Entered
none	Untested - This test has not been run, and is available for anyone to contribute feedback.	`{{result\|none}}`
pass robatino	Passed - The test has been run and the tester determine the test met the expected results	`{{result\|pass\|robatino}}`
inprogress adamwill	Inprogress - An inprogress result is often used for tests that take a long time to execute. Inprogress results should be temporary and change to pass, fail or warn.	`{{result\|inprogress\|adamwill}}`
fail jlaska ^[1] ^[2]	Failed - Indicates a failed test. A link to a bug must be provided. See Template:Result for details on providing bug information. ↑ RHBZ #XYZ ↑ RHBZ #ZXY	`{{result\|fail\|jlaska\|XYZ\|ZXY}}`
warn rhe ^[1]	Warning - This test completed and met the expected results of the test, but other issues were encountered during testing that warrant attention. ↑ Brief description about the warning status	`{{result\|warn\|rhe}} <ref>Brief description about the warning status</ref>`
pass hongqing warn kparal	Multiple results - More people can easily provide results to a single test case.	`{{result\|pass\|hongqing}} {{result\|warn\|kparal}}`
pass previous <build> run	Result from previous test run - This test result is directly moved from the test run of previous <build>.	`{{result\|pass\|previous <build> run}}`
	Unsupported - An unsupported test or configuration. No testing is required.

Test Matrix

Please click [show] in each table to view the tests of each media installation, and click [edit] to post your test results using the syntax in Key Section.

Image sanity

Milestone	Test Case	Server	Cloud
Alpha / Final	QA:Testcase_Mediakit_Checksums	pass Alpha efi, Beta_TC2 jcajka pass Beta_RC1 menantea pass TC2 menantea	pass Beta_RC1 menantea pass TC2 menantea
Beta	QA:Testcase_Mediakit_ISO_Size	pass Beta_TC2 jcajka pass Beta_RC1 menantea pass TC2 menantea	pass Beta_RC1 menantea pass TC2 menantea
Alpha	QA:Testcase_Mediakit_Repoclosure	warn Beta_TC2 jcajka ^[1] pass Beta_RC1 menantea pass TC2 menantea ^[2]	pass Beta_RC1 menantea
Alpha	QA:Testcase_Mediakit_FileConflicts	pass Beta_TC2 jcajka pass Beta_RC1 menantea	pass Beta_RC1 menantea

↑ Few not so important deps missing: busybox, antlr3, hornetq, coffee-script-common
↑ coffee-script-common missing

Default boot and install

Bare metal testing required
Running these tests in a virtualized environment is valuable, but the test must pass on bare metal using a physical install medium for each release-blocking image in each test environment at least for the final release candidate image (i.e. the released image) for each milestone.

Single test table
In all of these tests, the test case used is QA:Testcase_Boot_default_install. That is where the links point. The same test needs to be run for multiple images and target platforms. Note that the non-installer-based ARM disk images are covered by the later #ARM disk images section.

Milestone	Image	PKVM BE			PKVM LE			PVM
Milestone	Image	Host	Guest BE	Guest LE	Host	Guest BE	Guest LE	LPAR BE	LPAR LE
Alpha	Server netinst	none	none	none	none	^[1]		none	none
Alpha	Server offline	none	pass Alpha_RC6 sharkcz pass Beta_TC2 menantea pass TC2 menantea	pass Alpha_RC6 menantea pass Beta_TC2 menantea pass TC2 menantea	pass Alpha_RC6 jcajka pass Beta_TC2 jcajka			pass Alpha_RC6 menantea	none

↑ Bug https://bugzilla.linux.ibm.com/show_bug.cgi?id=122826 - qemu-le guest - TX virtqueue fails to be handled by vhost and falls back to QEMU

PXE boot

Milestone	Test Case	PKVM BE			PKVM LE			PVM
Milestone	Test Case	Host	Guest BE	Guest LE	Host	Guest BE	Guest LE	LPAR BE	LPAR LE
Beta	QA:Testcase_Boot_Methods_Pxeboot	pass Beta_TC2 efi pass Beta_RC1 menantea	pass Beta_TC2 menantea	pass Beta_TC2 efi	pass Beta_TC2 efi pass Beta_RC1 efi	^[1]		none	none

↑ Bug https://bugzilla.linux.ibm.com/show_bug.cgi?id=122826 - qemu-le guest - TX virtqueue fails to be handled by vhost and falls back to QEMU

USB media

Milestone	Test Case	PKVM BE			PKVM LE			PVM
Milestone	Test Case	Host	Guest BE	Guest LE	Host	Guest BE	Guest LE	LPAR BE	LPAR LE
Alpha	QA:Testcase_USB_stick_Live LiveUSB-creator	none	none	none	none	^[1]		none	none
Alpha	QA:Testcase_USB_stick_Live Live-ISO-to-Disk	none	none	none	none			none	none
Alpha	QA:Testcase_USB_stick_Live_dd	none	none	none	none			none	none
Alpha	QA:Testcase_USB_stick_DVD Live-ISO-to-Disk	none	none	none	none			none	none
Alpha	QA:Testcase_USB_stick_DVD_dd	none	none	none	none			none	none

↑ Bug https://bugzilla.linux.ibm.com/show_bug.cgi?id=122826 - qemu-le guest - TX virtqueue fails to be handled by vhost and falls back to QEMU

Virtualization

Milestone	Test Case	PKVM BE			PKVM LE			PVM
Milestone	Test Case	Host	Guest BE	Guest LE	Host	Guest BE	Guest LE	LPAR BE	LPAR LE
Beta	QA:Testcase_Install_to_Previous_KVM	none	pass Beta_TC2 menantea pass Beta_RC1 menantea	none	none	^[1]		none	none
Beta	QA:Testcase_Install_to_Current_KVM	none	pass Beta_TC2 menantea ^[2]	pass Beta_RC1 menantea fail TC2 menantea ^[3]	none			none	none
Final	QA:Testcase_Boot_Methods_Xen_Para_Virt	none	none	none	none			none	none

↑ Bug https://bugzilla.linux.ibm.com/show_bug.cgi?id=122826 - qemu-le guest - TX virtqueue fails to be handled by vhost and falls back to QEMU
↑ compatibility mode in KVM is not set. I did an "ifconfig eth0 up" in the anaconda shell prior to choose vnc to install.Install went fine and guest was operational
↑ Unable to install qemu -> Error: nothing provides libseccomp >= 1.0.0 needed by qemu-system-x86-2:2.3.0-1.fc22.ppc64le

Storage devices

Milestone	Test Case	PKVM BE			PKVM LE			PVM
Milestone	Test Case	Host	Guest BE	Guest LE	Host	Guest BE	Guest LE	LPAR BE	LPAR LE
Alpha	QA:Testcase_install_to_SATA	none	none	none	none	^[1]		none	none
Alpha	QA:Testcase_install_to_PATA	none	pass Alpha_RC6 efi	pass Alpha_RC6 efi	none			none	none
Alpha	QA:Testcase_install_to_SCSI	none	pass Alpha_RC6 efi	pass Alpha_RC6 efi	none			none	none
Alpha	QA:Testcase_install_to_SAS	pass Alpha_RC6 jcapik pass Beta_RC1 menantea	none	none	pass Alpha_RC6 jcajka pass Beta_RC1 menantea			none	none
Beta	QA:Testcase_install_to_firmware_RAID	none			none
Beta	QA:Testcase_install_to_hardware_RAID	none			none
Beta	QA:Testcase_install_to_VirtIO		none	none
Final	QA:Testcase_install_to_iSCSI_no_authentication	none	none	none	none			none	none
Final	QA:Testcase_install_to_FCoE_target	none	none	none	none			none	none
Optional	QA:Testcase_install_to_multipath	pass Beta_RC1 menantea ^[2]	pass Beta_RC1 menantea pass Beta_TC2 sharkcz ^[3]	none	pass Beta_RC1 menantea ^[4]			none	none

↑ Bug https://bugzilla.linux.ibm.com/show_bug.cgi?id=122826 - qemu-le guest - TX virtqueue fails to be handled by vhost and falls back to QEMU
↑ multipath over 2 disks SAS
↑ sharkcz: multipath over 2 SCSI disks under KVM
↑ multipath over 2 disks SAS

Guided storage configuration

Milestone	Test Case	PKVM BE			PKVM LE			PVM
Milestone	Test Case	Host	Guest BE	Guest LE	Host	Guest BE	Guest LE	LPAR BE	LPAR LE
Alpha	QA:Testcase_partitioning_guided_empty	pass Alpha_RC6 jcapik	pass Alpha_RC6 menantea pass Beta_TC2 menantea pass Beta_RC1 menantea	pass Alpha_RC6 menantea	pass Alpha_RC6 jcajka	^[1]		pass Alpha_RC6 efi	none
Alpha	QA:Testcase_partitioning_guided_delete_all	fail Alpha_RC6 jcapik pass Beta_RC1 efi pass Beta_RC3 efi	pass Alpha_RC6 menantea pass Beta_TC2 menantea	pass Alpha_RC6 efi	pass Beta_TC2 jcajka ^[2] pass Beta_RC1 efi pass Beta_RC3 efi pass TC2 efi			pass Alpha_RC6 efi pass Beta_RC1 menantea	none
Alpha	QA:Testcase_partitioning_guided_multi_select	none	pass Alpha_RC6 menantea warn Beta_TC2 menantea ^[3]^[4] fail Beta_TC2 menantea ^[2] pass TC2 menantea	pass Alpha_RC6 efi	pass Beta_TC2 jcajka ^[2]			pass Alpha_RC6 efi pass Beta_RC1 menantea	none
Beta	QA:Testcase_partitioning_guided_delete_partial	pass Beta_TC2 efi	pass Beta_TC2 menantea	pass Beta_TC2 efi	pass Beta_TC2 jcajka ^[2] pass Beta_RC1 efi			pass Beta_RC1 menantea	none
Beta	QA:Testcase_partitioning_guided_free_space	pass Beta_TC2 efi	pass Beta_TC2 menantea	pass Beta_TC2 efi	pass Beta_TC2 efi pass Beta_RC1 efi			pass Beta_RC1 menantea	none
Beta	QA:Testcase_partitioning_guided_encrypted	pass Beta_TC2 efi pass Beta_RC1 efi pass Beta_RC3 efi	pass Beta_TC2 menantea pass Beta_RC3 efi	pass Beta_TC2 efi pass Beta_RC3 efi	pass Beta_TC2 efi pass Beta_RC1 efi pass Beta_RC3 efi			pass Beta_RC1 menantea	none
Beta	QA:Testcase_partitioning_guided_multi_empty_all	pass Beta_TC2 efi pass Beta_RC1 efi	pass Beta_TC2 menantea pass Beta_RC3 efi	pass Beta_TC2 efi pass Beta_RC3 efi	pass Beta_TC2 jcajka ^[2] pass Beta_RC1 efi			pass Beta_RC1 menantea	none

↑ Bug https://bugzilla.linux.ibm.com/show_bug.cgi?id=122826 - qemu-le guest - TX virtqueue fails to be handled by vhost and falls back to QEMU
↑ ^2.0 ^2.1 ^2.2 ^2.3 ^2.4 RHBZ #1210003
↑ when I installed two fedora in two different disks, grub proposes me only one fedora at reboot (no choice)
↑ same thing when I installed two fedora in one disk, grub proposes me only one fedora at reboot (no choice)

Guided storage shrinking

Environments
For this test, the column headings refer to the storage volume type to be shrunk, not the one chosen to replace it for the new installation.

Milestone	Test Case	Format	PKVM BE			PKVM LE			PVM
Milestone	Test Case	Format	Host	Guest BE	Guest LE	Host	Guest BE	Guest LE	LPAR BE	LPAR LE
Final	QA:Testcase_partitioning_guided_shrink	ext3	none	none	none	none	^[1]		none	none
Final	QA:Testcase_partitioning_guided_shrink	ext4	none	none	none	none			none	none
Final	QA:Testcase_partitioning_guided_shrink	NTFS	none	none	none	none			none	none

↑ Bug https://bugzilla.linux.ibm.com/show_bug.cgi?id=122826 - qemu-le guest - TX virtqueue fails to be handled by vhost and falls back to QEMU

Custom storage configuration

Milestone	Test Case	PKVM BE			PKVM LE			PVM
Milestone	Test Case	Host	Guest BE	Guest LE	Host	Guest BE	Guest LE	LPAR BE	LPAR LE
Beta	QA:Testcase_Partitioning_On_Software_RAID	pass Beta_RC1 efi	pass Beta_TC2 menantea	pass Beta_TC2 efi	pass Beta_RC1 efi	^[1]		none	none
Final	QA:Testcase_anaconda_btrfs_rootfs_on_disk_partition	none	none	none	none			none	none
Final	QA:Testcase_anaconda_ext3_rootfs_on_disk_partition	none	none	none	none			none	none
Final	QA:Testcase_anaconda_xfs_rootfs_on_disk_partition	none	none	none	none			none	none
Optional	QA:Testcase_Partitioning_No_Swap	none	none	none	none			none	none

↑ Bug https://bugzilla.linux.ibm.com/show_bug.cgi?id=122826 - qemu-le guest - TX virtqueue fails to be handled by vhost and falls back to QEMU

User interface

Milestone	Test Case	Result BE	Result LE
Alpha	QA:Testcase_Anaconda_User_Interface_Graphical	pass Beta_TC2 sharkcz pass Beta_RC1 menantea	none
Alpha	QA:Testcase_Anaconda_User_Interface_Text	pass Alpha_RC6 menantea pass Beta_TC2 menantea	pass Alpha_RC6 jcajka
Alpha	QA:Testcase_Anaconda_User_Interface_VNC	pass sharkcz ^[1] pass Beta_TC2 menantea ^[1] pass Beta_RC1 jcajka	pass Beta_TC2 jcajka
Alpha	QA:Testcase_Anaconda_User_Interface_VNC_Vncconnect	pass Alpha_RC6 menantea pass Beta_TC2 menantea	pass Alpha_RC6 menantea

Milestone	Test Case	PKVM BE			PKVM LE			PVM
Milestone	Test Case	Host	Guest BE	Guest LE	Host	Guest BE	Guest LE	LPAR BE	LPAR LE
Alpha	QA:Testcase_Anaconda_User_Interface_Basic_Video_Driver	none	none	none	none	^[2]		none	none

Milestone	Test Case	PKVM BE			PKVM LE			PVM
Milestone	Test Case	Host	Guest BE	Guest LE	Host	Guest BE	Guest LE	LPAR BE	LPAR LE
Beta	QA:Testcase_Anaconda_User_Interface_serial_console	none	none	none	none	^[3]		none	none

↑ ^1.0 ^1.1 RHBZ #1206060
↑ Bug https://bugzilla.linux.ibm.com/show_bug.cgi?id=122826 - qemu-le guest - TX virtqueue fails to be handled by vhost and falls back to QEMU
↑ Bug https://bugzilla.linux.ibm.com/show_bug.cgi?id=122826 - qemu-le guest - TX virtqueue fails to be handled by vhost and falls back to QEMU

Installation repositories

Milestone	Test Case	Result BE	Result LE
Alpha	QA:Testcase_install_repository_Mirrorlist_graphical	none	none
Alpha	QA:Testcase_install_repository_HTTP/FTP_graphical	pass Alpha_RC6 menantea pass Beta_TC2 menantea	pass Alpha_RC6 menantea
Alpha	QA:Testcase_install_repository_HTTP/FTP_variation	pass Alpha_RC6 menantea pass Beta_TC2 menantea	pass Alpha_RC6 menantea
Beta	QA:Testcase_install_repository_NFS_graphical	pass Beta_TC2 efi pass Beta_RC3 efi	pass Beta_TC2 efi pass Beta_RC3 efi
Beta	QA:Testcase_install_repository_NFS_variation	pass Beta_TC2 efi pass Beta_RC3 efi	pass Beta_TC2 efi pass Beta_RC3 efi
Final	QA:Testcase_install_repository_NFSISO_variation	pass Beta_TC2 efi	pass Beta_TC2 efi
Final	QA:Testcase_install_repository_Hard_drive_variation	pass Beta_TC2 menantea	none

Package sets

Milestone	Test Case	PKVM BE			PKVM LE			PVM
Milestone	Test Case	Host	Guest BE	Guest LE	Host	Guest BE	Guest LE	LPAR BE	LPAR LE
Beta	QA:Testcase_Package_Sets_Minimal_Package_Install	none	pass Beta_TC2 menantea	pass Beta_TC2 efi	none	^[1]		none	none
Optional	QA:Testcase_Package_Sets_KDE_Package_Install	none	none	none	none			none	none

↑ Bug https://bugzilla.linux.ibm.com/show_bug.cgi?id=122826 - qemu-le guest - TX virtqueue fails to be handled by vhost and falls back to QEMU

Kickstart

Milestone	Test Case	Result BE	Result LE
Alpha	QA:Testcase_kickstart_user_creation	pass Alpha_RC6 menantea pass Beta_TC2 menantea	pass Alpha_RC6 menantea pass Beta_TC2 jcajka
Beta	QA:Testcase_Kickstart_Http_Server_Ks_Cfg	pass Beta_TC2 menantea	pass Beta_TC2 jcajka
Beta	QA:Testcase_Kickstart_File_Path_Ks_Cfg	warn Beta_TC2 menantea ^[1]	none
Beta	QA:Testcase_Kickstart_Hd_Device_Path_Ks_Cfg	none	none
Beta	QA:Testcase_Kickstart_Nfs_Server_Path_Ks_Cfg	pass Beta_TC2 efi	pass Beta_TC2 efi

↑ I was not able to run this test but I guess the problem is my misunderstanding of how to run it...

Upgrade

Milestone	Test Case	PKVM BE			PKVM LE			PVM
Milestone	Test Case	Host	Guest BE	Guest LE	Host	Guest BE	Guest LE	LPAR BE	LPAR LE
Beta	QA:Testcase_upgrade_fedup_cli_previous_server	none	fail Beta_TC2 menantea ^[1] ^[2] fail Beta_RC3 menantea ^[3]	pass TC2 menantea	none	^[4]		none	none
Beta	QA:Testcase_upgrade_fedup_cli_previous_minimal	none	warn Beta_TC2 menantea ^[5]	none	none			none	none
Beta	QA:Testcase_upgrade_fedup_cli_previous_workstation_encrypted	none	fail Beta_TC2 menantea ^[1] ^[6]	none	none			none	none

↑ ^1.0 ^1.1 RHBZ #1185604
↑ after install of systemd-216-24.fc21 on fc21, test seems succesful
↑ Unable to achieve fedup --network 22 --instrepo http://ppc.koji.fedoraproject.org/compose/22_Beta_RC3/22_Beta/Server/ppc64/os/ because of "Package mesa-libwayland-egl-10.5.4-1.20150505.fc22.ppc64.rpm is not signed"
↑ Bug https://bugzilla.linux.ibm.com/show_bug.cgi?id=122826 - qemu-le guest - TX virtqueue fails to be handled by vhost and falls back to QEMU
↑ minimal install is not available, could we provide it ?
↑ test done on server image: after install of systemd-216-24.fc21 on fc21, test FAILS in dracut. This needs to be done again when systemd will be available on fc21 update

Internationalization and Localization

Milestone	Test Case	Result BE	Result LE
Final	QA:Testcase_Arabic_Language_Install	none	none
Final	QA:Testcase_Asian_Language_Install	none	none
Final	QA:Testcase_Cyrillic_Language_Install	none	none
Final	QA:Testcase_Non-English_European_Language_Install	none	none
Optional	QA:Testcase_i18n_default_fonts	none	none

Miscellaneous

Milestone	Test Case	PKVM BE			PKVM LE			PVM
Milestone	Test Case	Host	Guest BE	Guest LE	Host	Guest BE	Guest LE	LPAR BE	LPAR LE
Alpha	QA:Testcase_Anaconda_user_creation	pass Beta_TC2 efi pass Beta_RC1 efi pass Beta_RC3 efi	pass Alpha_RC6 menantea pass Beta_TC2 menantea pass Beta_RC1 menantea pass Beta_RC3 efi	pass Alpha_RC6 efi pass Beta_RC3 efi	pass Beta_TC2 jcajka pass Beta_RC1 efi pass Beta_RC3 efi	^[1]		pass Alpha_RC6 efi	none

Milestone	Test Case	Result BE	Result LE
Alpha	QA:Testcase_Anaconda_save_traceback_to_bugzilla (GUI mode)	pass Alpha_RC6 menantea	pass Alpha_RC6 menantea
Alpha	QA:Testcase_Anaconda_save_traceback_to_bugzilla (text mode)	pass Alpha_RC6 menantea	pass Alpha_RC6 menantea
Alpha	QA:Testcase_Anaconda_updates.img_via_URL	pass Alpha_RC6 menantea	pass Alpha_RC6 menantea Beta_TC2 jcajka
Final	QA:Testcase_Anaconda_updates.img_via_installation_source	none	none
Final	QA:Testcase_Anaconda_updates.img_via_local_media	none	none
Optional	QA:Testcase_Anaconda_traceback_debug_mode (GUI mode)	none	none
Optional	QA:Testcase_Anaconda_traceback_debug_mode (text mode)	none	none

↑ Bug https://bugzilla.linux.ibm.com/show_bug.cgi?id=122826 - qemu-le guest - TX virtqueue fails to be handled by vhost and falls back to QEMU
↑ Bug https://bugzilla.linux.ibm.com/show_bug.cgi?id=122826 - qemu-le guest - TX virtqueue fails to be handled by vhost and falls back to QEMU
↑ boot local disk do not exist for ppc64/ppc64le grub2

Milestone	Test Case	PKVM BE			PKVM LE			PVM
Milestone	Test Case	Host	Guest BE	Guest LE	Host	Guest BE	Guest LE	LPAR BE	LPAR LE
Beta	QA:Testcase_Anaconda_rescue_mode	none	pass Beta_TC2 efi	pass Beta_TC2 efi pass Beta_RC1 menantea	pass Beta_TC2 jcajka	^[2]		none	none
Optional	QA:Testcase_Install_Image_Boot_Local	^[3]

[bzXYZ-1] RHBZ #XYZ

[bzZXY-2] RHBZ #ZXY

[3] Brief description about the warning status

[4] Few not so important deps missing: busybox, antlr3, hornetq, coffee-script-common

[5] -script-common missing

[6] Bug https://bugzilla.linux.ibm.com/show_bug.cgi?id=122826 - qemu-le guest - TX virtqueue fails to be handled by vhost and falls back to QEMU

[7] Bug https://bugzilla.linux.ibm.com/show_bug.cgi?id=122826 - qemu-le guest - TX virtqueue fails to be handled by vhost and falls back to QEMU

[8] Bug https://bugzilla.linux.ibm.com/show_bug.cgi?id=122826 - qemu-le guest - TX virtqueue fails to be handled by vhost and falls back to QEMU

[9] Bug https://bugzilla.linux.ibm.com/show_bug.cgi?id=122826 - qemu-le guest - TX virtqueue fails to be handled by vhost and falls back to QEMU

[10] tibility mode in KVM is not set. I did an "ifconfig eth0 up" in the anaconda shell prior to choose vnc to install.Install went fine and guest was operational

[11] Unable to install qemu -> Error: nothing provides libseccomp >= 1.0.0 needed by qemu-system-x86-2:2.3.0-1.fc22.ppc64le

[12] Bug https://bugzilla.linux.ibm.com/show_bug.cgi?id=122826 - qemu-le guest - TX virtqueue fails to be handled by vhost and falls back to QEMU

[13] ultipath over 2 disks SAS

[14] sharkcz: multipath over 2 SCSI disks under KVM

[15] ultipath over 2 disks SAS

[16] Bug https://bugzilla.linux.ibm.com/show_bug.cgi?id=122826 - qemu-le guest - TX virtqueue fails to be handled by vhost and falls back to QEMU

[bz1210003-17] 2.0 ^2.1 ^2.2 ^2.3 ^2.4 RHBZ #1210003

[18] when I installed two fedora in two different disks, grub proposes me only one fedora at reboot (no choice)

[19] same thing when I installed two fedora in one disk, grub proposes me only one fedora at reboot (no choice)

[20] Bug https://bugzilla.linux.ibm.com/show_bug.cgi?id=122826 - qemu-le guest - TX virtqueue fails to be handled by vhost and falls back to QEMU

[1]

[2]

[1]

[1]

[2]

[1]

[1]

[1]

[1]

[2]

[3]

[1]

[2]

[3]

[4]

[1]

[2]

[3]

[4]

[1]

[1]

[1]

[2]

[3]

[1]

[1]

[1]

[2]

[3]

[4]

[5]

[6]

[1]

[2]

[3]

@@ Line 309: / Line 309: @@
 | {{result|none}}
 | {{result|pass|Beta_TC2 menantea}}<ref>compatibility mode in KVM is not set. I did an "ifconfig eth0 up" in the anaconda shell prior to choose vnc to install.Install went fine and guest was operational</ref>
-| {{result|pass|Beta_RC1 menantea}}
+| {{result|pass|Beta_RC1 menantea}}{{result|fail|TC2 menantea}}<ref>Unable to install qemu -> Error: nothing provides libseccomp >= 1.0.0 needed by qemu-system-x86-2:2.3.0-1.fc22.ppc64le</ref>
 | {{result|none}}
 | style="background:lightgrey;"|

Search