Test Results:Fedora 22 Rawhide 20141216 Installation

No longer current
The compose for which this page contains results is no longer the current one. This page contains the results for the current compose.

This page records Installation validation testing test results for the Fedora 22 20141216 nightly compose.

Which tests to run

Test coverage page
This page provides information about test coverage for the tests on this page across all the composes for the current release: it can help you see which test cases most need to be run.

Tests with a Milestone of Basic, Beta or Final are the most important. Optional tests are less so, but still useful to run. The milestone indicates that for that milestone release or a later one to be approved for release, the test must have been run against the release candidate build (so at Beta, all Basic and Beta tests must have been run, for instance). However, it is important to run the tests for all milestones as early and often as possible. Please refer to the test coverage page linked above and try to find and run tests which have not been run at all, or not run recently, for the current release.

How to test

1. Download one or more media for testing: Template:Fedora 22 Rawhide 20141216 Download

2. Perform one or more of the test cases and add your results to the table below

• You can submit results by editing the page directly, or by using relval, with the relval report-results command. It provides a simple text interface for reporting test results.

3. If a test fails, file a bug report. You may propose the bug as a release blocker or freeze exception bug for the appropriate release - see blocker bug process and freeze exception bug process.

Some tests must be run against particular Products or images - for example, the #Default boot and install tests. If no particular product or image is specified either in this page or the test case page, you can use any appropriate image. For example, you can run most of the #General Tests with the Workstation live image, or either of the Server install images.

If you notice a problem during a test which does not constitute a complete failure of the test, you should still file a bug report, but it may not be appropriate to propose it as a release blocker bug. Use your judgment in deciding this, with reference to the Fedora_Release_Criteria, which these tests are intended to verify. If you are unsure, err on the side of proposing the bug as a blocker.

Don't install updates
Don't install updates before performing any of the tests, as when you are testing pre-releases, available updates are not part of the proposed released package set.

Virtual machine testing
In most cases, testing in a virtual machine is OK. You can test UEFI (including SecureBoot) in VMs as well.

Results summary page

The Test Results:Fedora 22 Rawhide 20141216 Summary page contains the results from this page and all the other validation pages for the same compose listed together to provide an overview.

Add, Modify or Remove a Test Case

1. Please request review for your changes by publishing your test case for review to the test mailing list and/or the appropriate working group mailing list (e.g. server, cloud, or desktop).
2. Once reviewed, make your changes to any current documents that use the template (e.g. Test_Results:Current_Installation_Test).
3. Lastly, update Template:Installation_test_matrix with the same changes.

Key

See the table below for a sample format for test results. All test results are posted using the result template.

Test Result	Explanation	Code Entered
none	Untested - This test has not been run, and is available for anyone to contribute feedback.	{{result|none}}
pass robatino	Passed - The test has been run and the tester determine the test met the expected results	{{result|pass|robatino}}
inprogress adamwill	Inprogress - An inprogress result is often used for tests that take a long time to execute. Inprogress results should be temporary and change to pass, fail or warn.	{{result|inprogress|adamwill}}
fail jlaska	Failed - Indicates a failed test. A link to a bug must be provided. See Template:Result for details on providing bug information.	{{result|fail|jlaska|XYZ|ZXY}}
warn rhe	Warning - This test completed and met the expected results of the test, but other issues were encountered during testing that warrant attention.	{{result|warn|rhe}} <ref>Brief description about the warning status</ref>
pass hongqing warn kparal	Multiple results - More people can easily provide results to a single test case.	{{result|pass|hongqing}} {{result|warn|kparal}}
fail pboy	Failed - Same issue with LVM again	{{result|fail|pboy|2246871|2244305}}
pass previous <build> run	Result from previous test run - This test result is directly moved from the test run of previous <build>.	{{result|pass|previous <build> run}}
	Unsupported - An unsupported test or configuration. No testing is required.

Test Matrix

Please click [show] in each table to view the tests of each media installation, and click [edit] to post your test results using the syntax in Key Section.

Image sanity

Milestone	Test Case	Server	Workstation	Spins	ARM disks	Cloud
Alpha / Final	QA:Testcase_Mediakit_Checksums	none	none	none	none	none
Beta	QA:Testcase_Mediakit_ISO_Size	none	pass mccann2	none		none
Alpha	QA:Testcase_Mediakit_Repoclosure	none
Alpha	QA:Testcase_Mediakit_FileConflicts	none

Default boot and install

Bare metal testing required
Running these tests in a virtualized environment is valuable, but the test must pass on bare metal using a physical install medium for each release-blocking image in each test environment at least for the final release candidate image (i.e. the released image) for each milestone.

Single test table
In all of these tests, the test case used is QA:Testcase_Boot_default_install. That is where the links point. The same test needs to be run for multiple images and target platforms. Note that the non-installer-based ARM disk images are covered by the later #ARM disk images section.

Milestone	Image	i386	x86_64	UEFI
Alpha	Workstation live	none	warn satellit	none
Alpha	Server netinst	none	none	none
Alpha	Server offline	none	none	none
Alpha	KDE live	none	pass satellit	none
Optional	Xfce live	none	none	none
Optional	LXDE live	none	none	none
Optional	MATE live	none	pass satellit	none
Optional	SoaS live	none	pass satellit	none

ARM disk images

Single test table
In all of these tests, the test case used is QA:Testcase_arm_image_deployment. That is where the links point. The same test needs to be run for multiple images and target platforms.

Milestone	Image	Ext boot
Alpha	Minimal	none
Alpha	KDE	none
Optional	Xfce	none
Optional	Desktop	none
Optional	LXDE	none
Optional	MATE	none
Optional	SoaS	none

PXE boot

Milestone	Test Case	i386	x86_64	ARM
Alpha	QA:Testcase_Boot_Methods_Pxeboot	none	none	none

USB media

Milestone	Test Case	i386	x86_64	UEFI
Alpha	QA:Testcase_USB_stick_Live LiveUSB-creator	none	pass satellit	none
Alpha	QA:Testcase_USB_stick_Live Live-ISO-to-Disk	none	none	none
Alpha	QA:Testcase_USB_stick_Live_dd	none	none	none
Alpha	QA:Testcase_USB_stick_DVD Live-ISO-to-Disk	none	none	none
Alpha	QA:Testcase_USB_stick_DVD_dd	none	none	none

Virtualization

Milestone	Test Case	x86 BIOS	x86 UEFI	ARM
Beta	QA:Testcase_Install_to_Previous_KVM	none	none	none
Beta	QA:Testcase_Install_to_Current_KVM	none	none	none
Final	QA:Testcase_Boot_Methods_Xen_Para_Virt	none	none	none

Storage devices

Guided storage configuration

Milestone	Test Case	x86 BIOS	x86 UEFI	ARM
Alpha	QA:Testcase_partitioning_guided_empty	none	none	none
Alpha	QA:Testcase_partitioning_guided_delete_all	none	none	none
Alpha	QA:Testcase_partitioning_guided_multi_select	none	none
Beta	QA:Testcase_partitioning_guided_delete_partial	none	none
Beta	QA:Testcase_partitioning_guided_free_space	none	none
Beta	QA:Testcase_partitioning_guided_encrypted	none	none	none
Beta	QA:Testcase_partitioning_guided_multi_empty_all	none	none

Guided storage shrinking

Environments
For this test, the column headings refer to the storage volume type to be shrunk, not the one chosen to replace it for the new installation.

Milestone	Test Case	ext4	NTFS
Final	QA:Testcase_partitioning_guided_shrink	none	none

Custom storage configuration

Milestone	Test Case	x86 BIOS	x86 UEFI	ARM
Beta	QA:Testcase_Partitioning_On_Software_RAID	none	none
Final	QA:Testcase_anaconda_btrfs_rootfs_on_disk_partition	none	none	none
Final	QA:Testcase_anaconda_ext3_rootfs_on_disk_partition	none	none	none
Final	QA:Testcase_anaconda_xfs_rootfs_on_disk_partition	none	none	none
Optional	QA:Testcase_Partitioning_No_Swap	none	none	none

User interface

Milestone	Test Case	x86 BIOS	x86 UEFI
Alpha	QA:Testcase_Anaconda_User_Interface_Basic_Video_Driver	none	none

Milestone	Test Case	x86	ARM
Beta	QA:Testcase_Anaconda_User_Interface_serial_console	pass lnie	none

Installation repositories

Kickstart

Upgrade

Milestone	Test Case	x86 BIOS	x86 UEFI	ARM
Beta	QA:Testcase_upgrade_fedup_cli_previous_desktop	none	none	none
Beta	QA:Testcase_upgrade_fedup_cli_previous_kde	none	none	none
Beta	QA:Testcase_upgrade_fedup_cli_previous_minimal	none	none	none
Beta	QA:Testcase_upgrade_fedup_cli_previous_desktop_encrypted	none	none	none

Miscellaneous

Milestone	Test Case	x86	ARM
Alpha	QA:Testcase_Anaconda_user_creation	none	none

Milestone	Test Case	Result
Alpha	QA:Testcase_Anaconda_save_traceback_to_bugzilla (GUI mode)	none
Alpha	QA:Testcase_Anaconda_save_traceback_to_bugzilla (text mode)	none
Alpha	QA:Testcase_Anaconda_updates.img_via_URL	pass lnie
Final	QA:Testcase_Anaconda_updates.img_via_installation_source	none
Final	QA:Testcase_Anaconda_updates.img_via_local_media	none
Optional	QA:Testcase_Anaconda_traceback_debug_mode (GUI mode)	none
Optional	QA:Testcase_Anaconda_traceback_debug_mode (text mode)	none

Milestone	Test Case	x86 BIOS	x86 UEFI
Beta	QA:Testcase_Anaconda_rescue_mode	none	none
Final	QA:Testcase_dualboot_with_windows	none	none
Final	QA:Testcase_dualboot_with_OSX		none
Optional	QA:Testcase_Install_Image_Boot_Local	none
Optional	QA:Testcase_Memtest86	none